Re: [patch 12/12] Configure out ethtool support

[Stephen Hemminger <shemminger@vyatta.com>]

On Thu, 31 Jul 2008 10:36:31 -0500
Matt Mackall <mpm@selenic.com> wrote:

> 
> On Thu, 2008-07-31 at 03:47 -0700, David Miller wrote:
> > I especially appreciate that you still haven't accepted the plain fact
> > that CONFIG_ETHTOOL needs to be selected by CONFIG_INET.
> 
> So far the following features have been mentioned as being critically
> dependent on ethtool:
> 
> - bridging
> - bonding
> - LRO
> - netfilter (really?)
> - IPv6 (really?)
> 
> And yet every single one of these is currently a config option, so your
> above statement is still looking awfully dubious. At this point I'd
> suggest that you've painted yourself into a corner where all these
> options must also actually be mandatory, but I'm afraid you might
> secretly want to do that anyway.
> 
> > I definitely see the next consequence of the CONFIG_ETHTOOL stuff, and
> > that's a set of ifdef'ola in all the drivers to config out the
> > per-driver ethtool support code.
> 
> If someone shows up with such a patch for a Xylinx or ARM SOC device,
> you probably should take it. If the patch is instead for a 10Gb PCIe
> device, I suggest you don't. (At least not until that sort of thing
> becomes standard embedded kit.)
> 

I have no problem with an embedded CONFIG_ETHTOOL that normal users
can ignore. Just don't expect the network developers to fix things
that are broken when CONFIG_ETHTOOL is not enabled. I.e if embedded
build is broken it is your problem.