From: Suresh Siddha <suresh.b.siddha@intel.com>
To: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com>,
Wolfgang Walter <wolfgang.walter@stwm.de>,
Herbert Xu <herbert@gondor.apana.org.au>,
"netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Ingo Molnar <mingo@elte.hu>,
"viro@ZenIV.linux.org.uk" <viro@ZenIV.linux.org.uk>,
"vegard.nossum@gmail.com" <vegard.nossum@gmail.com>
Subject: Re: Kernel oops with 2.6.26, padlock and ipsec: probably problem with fpu state changes
Date: Fri, 8 Aug 2008 16:11:21 -0700 [thread overview]
Message-ID: <20080808231121.GA13158@linux-os.sc.intel.com> (raw)
In-Reply-To: <489C97FB.2030408@zytor.com>
Walter, Viro,
As I can't test, can you please test this and Ack.
thanks,
suresh
---
[patch] fix via padlock instruction usage with kernel_fpu_begin/end()
Wolfgang Walter reported this oops on his via C3 using padlock for
AES-encryption:
##################################################################
BUG: unable to handle kernel NULL pointer dereference at 000001f0
IP: [<c01028c5>] __switch_to+0x30/0x117
*pde = 00000000
Oops: 0002 [#1] PREEMPT
Modules linked in:
Pid: 2071, comm: sleep Not tainted (2.6.26 #11)
EIP: 0060:[<c01028c5>] EFLAGS: 00010002 CPU: 0
EIP is at __switch_to+0x30/0x117
EAX: 00000000 EBX: c0493300 ECX: dc48dd00 EDX: c0493300
ESI: dc48dd00 EDI: c0493530 EBP: c04cff8c ESP: c04cff7c
DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068
Process sleep (pid: 2071, ti=c04ce000 task=dc48dd00 task.ti=d2fe6000)
Stack: dc48df30 c0493300 00000000 00000000 d2fe7f44 c03b5b43 c04cffc8 00000046
c0131856 0000005a dc472d3c c0493300 c0493470 d983ae00 00002696 00000000
c0239f54 00000000 c04c4000 c04cffd8 c01025fe c04f3740 00049800 c04cffe0
Call Trace:
[<c03b5b43>] ? schedule+0x285/0x2ff
[<c0131856>] ? pm_qos_requirement+0x3c/0x53
[<c0239f54>] ? acpi_processor_idle+0x0/0x434
[<c01025fe>] ? cpu_idle+0x73/0x7f
[<c03a4dcd>] ? rest_init+0x61/0x63
=======================
Wolfgang also found out that adding kernel_fpu_begin() and kernel_fpu_end()
around the padlock instructions fix the oops.
Suresh wrote:
These padlock instructions though don't use/touch SSE registers, but it behaves
similar to other SSE instructions. For example, it might cause DNA faults
when cr0.ts is set. While this is a spurious DNA trap, it might cause
oops with the recent fpu code changes.
This is the code sequence that is probably causing this problem:
a) new app is getting exec'd and it is somewhere in between
start_thread() and flush_old_exec() in the load_xyz_binary()
b) At pont "a", task's fpu state (like TS_USEDFPU, used_math() etc) is
cleared.
c) Now we get an interrupt/softirq which starts using these encrypt/decrypt
routines in the network stack. This generates a math fault (as
cr0.ts is '1') which sets TS_USEDFPU and restores the math that is
in the task's xstate.
d) Return to exec code path, which does start_thread() which does
free_thread_xstate() and sets xstate pointer to NULL while
the TS_USEDFPU is still set.
e) At the next context switch from the new exec'd task to another task,
we have a scenarios where TS_USEDFPU is set but xstate pointer is null.
This can cause an oops during unlazy_fpu() in __switch_to()
Now:
1) This should happen with or with out pre-emption. Viro also encountered
similar problem with out CONFIG_PREEMPT.
2) kernel_fpu_begin() and kernel_fpu_end() will fix this problem, because
kernel_fpu_begin() will manually do a clts() and won't run in to the
situation of setting TS_USEDFPU in step "c" above.
3) This was working before the fpu changes, because its a spurious
math fault which doesn't corrupt any fpu/sse registers and the task's
math state was always in an allocated state.
With out the recent dynamic fpu allocation changes, while we don't see oops,
there is a possible race still present in older kernels(for example,
while kernel is using kernel_fpu_begin() in some optimized clear/copy
page and an interrupt/softirq happens which uses these padlock
instructions generating DNA fault).
For now, fix the padlock instruction usage by calling them inside the
context of kernel_fpu_begin() and kernel_fpu_end()
Next steps:
a) Based on the need, possible introduction of light weight kernel_fpu_*
routines which will optimize the padlock usage case, where they don't
touch SSE/FPU registers, but generate DNA.
b) Looking deeper, do we need to disable interrupts in the kernel_fpu_begin()?
Is there a recursive case, where interrupt context also touches FPU/SSE
registers?
Reported-and-bisected-by: Wolfgang Walter <wolfgang.walter@stwm.de>
Signed-off-by: Wolfgang Walter <wolfgang.walter@stwm.de>
Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
---
diff --git a/drivers/char/hw_random/via-rng.c b/drivers/char/hw_random/via-rng.c
index f7feae4..3dee9e5 100644
--- a/drivers/char/hw_random/via-rng.c
+++ b/drivers/char/hw_random/via-rng.c
@@ -31,6 +31,7 @@
#include <asm/io.h>
#include <asm/msr.h>
#include <asm/cpufeature.h>
+#include <asm/i387.h>
#define PFX KBUILD_MODNAME ": "
@@ -67,16 +68,22 @@ enum {
* Another possible performance boost may come from simply buffering
* until we have 4 bytes, thus returning a u32 at a time,
* instead of the current u8-at-a-time.
+ *
+ * Padlock instructions can generate a spurious DNA fault, so
+ * we will call them in the context of kernel_fpu_[begin,end].
*/
static inline u32 xstore(u32 *addr, u32 edx_in)
{
u32 eax_out;
+ kernel_fpu_begin();
+
asm(".byte 0x0F,0xA7,0xC0 /* xstore %%edi (addr=%0) */"
:"=m"(*addr), "=a"(eax_out)
:"D"(addr), "d"(edx_in));
+ kernel_fpu_end();
return eax_out;
}
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 54a2a16..2c96d85 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -16,6 +16,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <asm/byteorder.h>
+#include <asm/i387.h>
#include "padlock.h"
/* Control word. */
@@ -141,6 +142,12 @@ static inline void padlock_reset_key(void)
asm volatile ("pushfl; popfl");
}
+/*
+ * While the padlock instructions don't use FP/SSE registers, they
+ * generate a spurious DNA fault when cr0.ts is '1'. These instructions
+ * should be used only inside the kernel_fpu_[begin, end] context.
+ */
+
static inline void padlock_xcrypt(const u8 *input, u8 *output, void *key,
void *control_word)
{
@@ -206,14 +213,20 @@ static void aes_encrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
{
struct aes_ctx *ctx = aes_ctx(tfm);
padlock_reset_key();
+
+ kernel_fpu_begin();
aes_crypt(in, out, ctx->E, &ctx->cword.encrypt);
+ kernel_fpu_end();
}
static void aes_decrypt(struct crypto_tfm *tfm, u8 *out, const u8 *in)
{
struct aes_ctx *ctx = aes_ctx(tfm);
padlock_reset_key();
+
+ kernel_fpu_begin();
aes_crypt(in, out, ctx->D, &ctx->cword.decrypt);
+ kernel_fpu_end();
}
static struct crypto_alg aes_alg = {
@@ -250,6 +263,7 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt(desc, &walk);
+ kernel_fpu_begin();
while ((nbytes = walk.nbytes)) {
padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr,
ctx->E, &ctx->cword.encrypt,
@@ -257,6 +271,7 @@ static int ecb_aes_encrypt(struct blkcipher_desc *desc,
nbytes &= AES_BLOCK_SIZE - 1;
err = blkcipher_walk_done(desc, &walk, nbytes);
}
+ kernel_fpu_end();
return err;
}
@@ -274,6 +289,7 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt(desc, &walk);
+ kernel_fpu_begin();
while ((nbytes = walk.nbytes)) {
padlock_xcrypt_ecb(walk.src.virt.addr, walk.dst.virt.addr,
ctx->D, &ctx->cword.decrypt,
@@ -281,6 +297,7 @@ static int ecb_aes_decrypt(struct blkcipher_desc *desc,
nbytes &= AES_BLOCK_SIZE - 1;
err = blkcipher_walk_done(desc, &walk, nbytes);
}
+ kernel_fpu_end();
return err;
}
@@ -320,6 +337,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt(desc, &walk);
+ kernel_fpu_begin();
while ((nbytes = walk.nbytes)) {
u8 *iv = padlock_xcrypt_cbc(walk.src.virt.addr,
walk.dst.virt.addr, ctx->E,
@@ -329,6 +347,7 @@ static int cbc_aes_encrypt(struct blkcipher_desc *desc,
nbytes &= AES_BLOCK_SIZE - 1;
err = blkcipher_walk_done(desc, &walk, nbytes);
}
+ kernel_fpu_end();
return err;
}
@@ -346,6 +365,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
blkcipher_walk_init(&walk, dst, src, nbytes);
err = blkcipher_walk_virt(desc, &walk);
+ kernel_fpu_begin();
while ((nbytes = walk.nbytes)) {
padlock_xcrypt_cbc(walk.src.virt.addr, walk.dst.virt.addr,
ctx->D, walk.iv, &ctx->cword.decrypt,
@@ -353,6 +373,7 @@ static int cbc_aes_decrypt(struct blkcipher_desc *desc,
nbytes &= AES_BLOCK_SIZE - 1;
err = blkcipher_walk_done(desc, &walk, nbytes);
}
+ kernel_fpu_end();
return err;
}
diff --git a/drivers/crypto/padlock-sha.c b/drivers/crypto/padlock-sha.c
index 40d5680..cea8830 100644
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -22,6 +22,7 @@
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/scatterlist.h>
+#include <asm/i387.h>
#include "padlock.h"
#define SHA1_DEFAULT_FALLBACK "sha1-generic"
@@ -109,9 +110,12 @@ static void padlock_do_sha1(const char *in, char *out, int count)
((uint32_t *)result)[3] = SHA1_H3;
((uint32_t *)result)[4] = SHA1_H4;
+ /* prevent taking the spurious DNA fault with padlock. */
+ kernel_fpu_begin();
asm volatile (".byte 0xf3,0x0f,0xa6,0xc8" /* rep xsha1 */
: "+S"(in), "+D"(result)
: "c"(count), "a"(0));
+ kernel_fpu_end();
padlock_output_block((uint32_t *)result, (uint32_t *)out, 5);
}
@@ -133,9 +137,12 @@ static void padlock_do_sha256(const char *in, char *out, int count)
((uint32_t *)result)[6] = SHA256_H6;
((uint32_t *)result)[7] = SHA256_H7;
+ /* prevent taking the spurious DNA fault with padlock. */
+ kernel_fpu_begin();
asm volatile (".byte 0xf3,0x0f,0xa6,0xd0" /* rep xsha256 */
: "+S"(in), "+D"(result)
: "c"(count), "a"(0));
+ kernel_fpu_end();
padlock_output_block((uint32_t *)result, (uint32_t *)out, 8);
}
next prev parent reply other threads:[~2008-08-08 23:11 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-17 14:53 Kernel oops with 2.6.26 and ipsec (Was: Re: IPSEC in 2.6.25 causes stalled connections) Wolfgang Walter
2008-07-17 20:42 ` Kernel oops with 2.6.26 and ipsec Wolfgang Walter
[not found] ` <200807301411.01622.wolfgang.walter@stwm.de>
[not found] ` <20080806103354.GA31623@gondor.apana.org.au>
2008-08-06 17:33 ` Kernel oops with 2.6.26, padlock and ipsec: probably problem with fpu state changes Wolfgang Walter
2008-08-06 20:14 ` Suresh Siddha
2008-08-06 21:21 ` Suresh Siddha
2008-08-07 0:38 ` Wolfgang Walter
2008-08-08 8:44 ` Wolfgang Walter
2008-08-08 18:31 ` Vegard Nossum
2008-08-07 16:23 ` Wolfgang Walter
2008-08-08 10:36 ` Wolfgang Walter
2008-08-08 18:53 ` Suresh Siddha
2008-08-08 19:01 ` H. Peter Anvin
2008-08-08 19:19 ` Wolfgang Walter
2008-08-08 23:11 ` Suresh Siddha [this message]
2008-08-09 0:38 ` Herbert Xu
2008-08-09 1:23 ` Herbert Xu
2008-08-09 1:54 ` Wolfgang Walter
2008-08-09 2:16 ` Herbert Xu
2008-08-09 3:09 ` Wolfgang Walter
2008-08-09 3:20 ` Herbert Xu
2008-08-09 14:29 ` Herbert Xu
2008-08-09 14:32 ` Herbert Xu
2008-08-09 17:52 ` Suresh Siddha
2008-08-10 5:30 ` Herbert Xu
2008-08-10 5:41 ` H. Peter Anvin
2008-08-11 22:57 ` Suresh Siddha
2008-08-09 17:48 ` Suresh Siddha
2008-08-09 1:28 ` Wolfgang Walter
2008-08-09 13:31 ` Herbert Xu
2008-08-09 14:37 ` Herbert Xu
2008-08-09 15:14 ` Wolfgang Walter
2008-08-09 15:57 ` Wolfgang Walter
2008-08-09 16:10 ` H. Peter Anvin
2008-08-09 17:02 ` Wolfgang Walter
2008-08-09 18:52 ` Suresh Siddha
2008-08-09 19:37 ` Suresh Siddha
2008-08-09 22:59 ` Wolfgang Walter
2008-08-10 3:05 ` Herbert Xu
2008-08-11 19:01 ` Suresh Siddha
2008-08-11 19:22 ` Ingo Molnar
2008-08-11 19:24 ` H. Peter Anvin
2008-08-11 20:19 ` Suresh Siddha
2008-08-12 0:39 ` Herbert Xu
2008-08-12 0:42 ` H. Peter Anvin
2008-08-12 0:46 ` Herbert Xu
2008-08-12 0:48 ` H. Peter Anvin
2008-08-12 0:52 ` Herbert Xu
2008-08-12 0:38 ` Wolfgang Walter
2008-08-12 11:43 ` Wolfgang Walter
2008-08-12 12:02 ` Herbert Xu
2008-08-12 18:28 ` Suresh Siddha
2008-08-12 23:40 ` Herbert Xu
2008-08-09 18:12 ` Suresh Siddha
2008-08-09 18:54 ` Suresh Siddha
2008-08-09 16:05 ` H. Peter Anvin
2008-08-09 18:14 ` Suresh Siddha
2008-08-10 0:29 ` Herbert Xu
2008-08-10 1:56 ` Wolfgang Walter
2008-08-10 1:59 ` Herbert Xu
2008-08-09 17:59 ` Suresh Siddha
2008-08-10 1:40 ` Herbert Xu
2008-08-09 1:49 ` Herbert Xu
2008-08-09 1:59 ` H. Peter Anvin
2008-08-09 2:43 ` Wolfgang Walter
2008-08-09 3:30 ` H. Peter Anvin
2008-08-09 10:50 ` Wolfgang Walter
2008-08-08 19:09 ` Wolfgang Walter
2008-08-08 19:32 ` Suresh Siddha
2008-08-08 23:10 ` Wolfgang Walter
2008-08-08 23:15 ` Suresh Siddha
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080808231121.GA13158@linux-os.sc.intel.com \
--to=suresh.b.siddha@intel.com \
--cc=herbert@gondor.apana.org.au \
--cc=hpa@zytor.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=netdev@vger.kernel.org \
--cc=vegard.nossum@gmail.com \
--cc=viro@ZenIV.linux.org.uk \
--cc=wolfgang.walter@stwm.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).