From: adobriyan@gmail.com
To: jcliburn@gmail.com, csnook@redhat.com
Cc: netdev@vger.kernel.org
Subject: atl1: WARNING at net/sched/sch_generic.c:221
Date: Thu, 21 Aug 2008 15:58:49 +0400 [thread overview]
Message-ID: <20080821115849.GA2126@x200.localdomain> (raw)
This message happens more or less every reboot, sometimes cable unplug/plug is needed
to restore connectivity, otherwise card is working fine.
[ 22.570010] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 26.570011] NET: Registered protocol family 10
[ 37.551934] eth0: no IPv6 routers present
[rebooted box which is directly connected to a box with atl1]
[ 2078.740004] atl1 0000:03:00.0: eth0 link is down
[ 2080.790004] atl1 0000:03:00.0: eth0 link is up 1000 Mbps full duplex
[ 2086.049998] NETDEV WATCHDOG: eth0 (atl1): transmit timed out
[ 2086.050004] ------------[ cut here ]------------
[ 2086.050004] WARNING: at net/sched/sch_generic.c:221 dev_watchdog+0x205/0x220()
[ 2086.050004] Modules linked in: ipv6 ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables
[ 2086.052503] Pid: 0, comm: swapper Not tainted 2.6.27-rc4-netns-nf #4
[ 2086.052503]
[ 2086.052503] Call Trace:
[ 2086.052503] <IRQ> [<ffffffff8023455f>] warn_on_slowpath+0x5f/0x80
[ 2086.052503] [<ffffffff80259c00>] ? trace_hardirqs_on_caller+0x130/0x160
[ 2086.052503] [<ffffffff80259b61>] ? trace_hardirqs_on_caller+0x91/0x160
[ 2086.052503] [<ffffffff80259c3d>] ? trace_hardirqs_on+0xd/0x10
[ 2086.052503] [<ffffffff80431ab5>] ? _spin_unlock_irqrestore+0x75/0x80
[ 2086.052503] [<ffffffff8024676c>] ? __queue_work+0x3c/0x50
[ 2086.052503] [<ffffffff80246814>] ? queue_work_on+0x44/0x60
[ 2086.052503] [<ffffffff80246993>] ? queue_work+0x53/0x60
[ 2086.052503] [<ffffffff803d4c35>] dev_watchdog+0x205/0x220
[ 2086.052503] [<ffffffff80259c3d>] ? trace_hardirqs_on+0xd/0x10
[ 2086.052503] [<ffffffff80259b61>] ? trace_hardirqs_on_caller+0x91/0x160
[ 2086.052503] [<ffffffff803d4a30>] ? dev_watchdog+0x0/0x220
[ 2086.052503] [<ffffffff8023eacc>] run_timer_softirq+0x18c/0x200
[ 2086.052503] [<ffffffff80239e67>] __do_softirq+0x67/0xe0
[ 2086.052503] [<ffffffff8020cc4c>] call_softirq+0x1c/0x30
[ 2086.052503] [<ffffffff8020f2b5>] do_softirq+0x65/0xa0
[ 2086.052503] [<ffffffff80239cf9>] irq_exit+0x99/0xb0
[ 2086.052503] [<ffffffff8021d187>] smp_apic_timer_interrupt+0x97/0xf0
[ 2086.052503] [<ffffffff8020c69b>] apic_timer_interrupt+0x6b/0x70
[ 2086.052503] <EOI> [<ffffffff802136ec>] ? mwait_idle+0x4c/0x60
[ 2086.052503] [<ffffffff802136e3>] ? mwait_idle+0x43/0x60
[ 2086.052503] [<ffffffff8020a276>] ? cpu_idle+0x46/0x90
[ 2086.052503] [<ffffffff804266d0>] ? rest_init+0x70/0x80
[ 2086.052503]
[ 2086.052503] ---[ end trace 4ccf372e8f6b84c3 ]---
[ 2086.070003] atl1 0000:03:00.0: eth0 link is up 1000 Mbps full duplex
[ 2090.390003] atl1 0000:03:00.0: eth0 link is down
[ 2092.550003] atl1 0000:03:00.0: eth0 link is up 1000 Mbps full duplex
next reply other threads:[~2008-08-21 11:57 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-08-21 11:58 adobriyan [this message]
2008-08-21 11:59 ` atl1: WARNING at net/sched/sch_generic.c:221 David Miller
2008-08-21 12:04 ` adobriyan
2008-08-21 12:08 ` David Miller
2008-09-14 19:26 ` Jay Cliburn
2008-09-14 19:58 ` Stephen Hemminger
2008-09-14 23:56 ` David Miller
2008-09-15 0:11 ` Jay Cliburn
2008-09-15 3:14 ` Jeff Garzik
2008-08-22 2:00 ` Jay Cliburn
2008-08-22 21:50 ` Jay Cliburn
2008-09-14 23:17 ` Jay Cliburn
2008-09-15 22:45 ` Alexey Dobriyan
2008-09-16 1:44 ` Jay Cliburn
2008-09-17 7:44 ` Alexey Dobriyan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080821115849.GA2126@x200.localdomain \
--to=adobriyan@gmail.com \
--cc=csnook@redhat.com \
--cc=jcliburn@gmail.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).