From: Ben Hutchings <bhutchings@solarflare.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: netdev@vger.kernel.org, linux-net-drivers@solarflare.com
Subject: [PATCH 29/52] sfc: Implement get_sset_count, replacing get_stats_count and self_test_count
Date: Mon, 1 Sep 2008 12:48:12 +0100 [thread overview]
Message-ID: <20080901114811.GW7908@solarflare.com> (raw)
In-Reply-To: <20080901111621.GT7908@solarflare.com>
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
---
drivers/net/sfc/ethtool.c | 23 ++++++++++++-----------
1 files changed, 12 insertions(+), 11 deletions(-)
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 72a2eb2..906d18a 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -373,16 +373,18 @@ static int efx_ethtool_fill_self_tests(struct efx_nic *efx,
return n;
}
-static int efx_ethtool_get_stats_count(struct net_device *net_dev)
+static int efx_ethtool_get_sset_count(struct net_device *net_dev,
+ int string_set)
{
- return EFX_ETHTOOL_NUM_STATS;
-}
-
-static int efx_ethtool_self_test_count(struct net_device *net_dev)
-{
- struct efx_nic *efx = netdev_priv(net_dev);
-
- return efx_ethtool_fill_self_tests(efx, NULL, NULL, NULL);
+ switch (string_set) {
+ case ETH_SS_STATS:
+ return EFX_ETHTOOL_NUM_STATS;
+ case ETH_SS_TEST:
+ return efx_ethtool_fill_self_tests(netdev_priv(net_dev),
+ NULL, NULL, NULL);
+ default:
+ return -EINVAL;
+ }
}
static void efx_ethtool_get_strings(struct net_device *net_dev,
@@ -719,10 +721,9 @@ struct ethtool_ops efx_ethtool_ops = {
.set_tso = ethtool_op_set_tso,
.get_flags = ethtool_op_get_flags,
.set_flags = ethtool_op_set_flags,
- .self_test_count = efx_ethtool_self_test_count,
+ .get_sset_count = efx_ethtool_get_sset_count,
.self_test = efx_ethtool_self_test,
.get_strings = efx_ethtool_get_strings,
.phys_id = efx_ethtool_phys_id,
- .get_stats_count = efx_ethtool_get_stats_count,
.get_ethtool_stats = efx_ethtool_get_stats,
};
--
Ben Hutchings, Senior Software Engineer, Solarflare Communications
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.
next prev parent reply other threads:[~2008-09-01 11:48 UTC|newest]
Thread overview: 55+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-01 11:16 [PATCH 00/52] sfc: Changes for 2.6.28 Ben Hutchings
2008-09-01 11:43 ` [PATCH 01/52] sfc: Replace net_dev->priv with netdev_priv(net_dev) Ben Hutchings
2008-09-01 11:43 ` [PATCH 02/52] sfc: Change first parameter type of {set,clear}_bit_le() to unsigned Ben Hutchings
2008-09-01 11:44 ` [PATCH 03/52] sfc: Remove unused field efx_channel::reset_work Ben Hutchings
2008-09-01 11:44 ` [PATCH 04/52] sfc: Use separate hardware TX queues to select checksum generation Ben Hutchings
2008-09-01 11:45 ` [PATCH 05/52] sfc: Avoid mangling error codes in efx_test_loopback() Ben Hutchings
2008-09-01 11:45 ` [PATCH 06/52] sfc: Reduce delays in SFE4001 initialisation Ben Hutchings
2008-09-01 11:46 ` [PATCH 07/52] sfc: Remove mistaken hardware workaround Ben Hutchings
2008-09-01 11:46 ` [PATCH 08/52] sfc: XMAC statistics fix-ups Ben Hutchings
2008-09-01 11:46 ` [PATCH 09/52] sfc: Remove inclusion of workarounds.h from efx.c Ben Hutchings
2008-09-01 11:46 ` [PATCH 10/52] sfc: Reverse the XOFF/XON pause frame control fifo thresholds Ben Hutchings
2008-09-01 11:46 ` [PATCH 11/52] sfc: Reduce log level for XGXS lane status Ben Hutchings
2008-09-01 11:46 ` [PATCH 12/52] sfc: Self-test reporting cleanup Ben Hutchings
2008-09-01 11:46 ` [PATCH 13/52] sfc: Speed up loopback self-test Ben Hutchings
2008-09-01 11:46 ` [PATCH 14/52] sfc: Don't leak PCI DMA maps in the TSO code when the queue fills up Ben Hutchings
2008-09-01 11:46 ` [PATCH 15/52] sfc: Use pci_map_single() to map the skb header when doing TSO Ben Hutchings
2008-09-01 11:46 ` [PATCH 16/52] sfc: Reduce the size of struct efx_tx_buffer Ben Hutchings
2008-09-01 11:46 ` [PATCH 17/52] sfc: Use explicit bool for boolean variables, parameters and return values Ben Hutchings
2008-09-01 11:46 ` [PATCH 18/52] sfc: Set net_device::vlan_features appropriately Ben Hutchings
2008-09-01 11:47 ` [PATCH 19/52] sfc: Cleaned up struct tso_state fields Ben Hutchings
2008-09-01 11:47 ` [PATCH 20/52] sfc: Removed forced inlining of long functions Ben Hutchings
2008-09-01 11:47 ` [PATCH 21/52] sfc: Export boot configuration in EEPROM through ethtool Ben Hutchings
2008-09-01 11:47 ` [PATCH 22/52] sfc: Move CPU counting for RSS into a separate function, efx_wanted_rx_queues() Ben Hutchings
2008-09-01 11:47 ` [PATCH 23/52] sfc: Remove efx_channel::has_interrupt Ben Hutchings
2008-09-01 11:47 ` [PATCH 24/52] sfc: Cleanup RX queue information Ben Hutchings
2008-09-01 11:47 ` [PATCH 25/52] sfc: Remove initialisation of RX_FILTER_CTL_REG.NUM_KER Ben Hutchings
2008-09-01 11:47 ` [PATCH 26/52] sfc: Make efx_for_each_channel_rx_queue() more efficient Ben Hutchings
2008-09-01 11:48 ` [PATCH 27/52] sfc: Remove efx_channel::evqnum field Ben Hutchings
2008-09-01 11:48 ` [PATCH 28/52] sfc: Cleanup RX event processing Ben Hutchings
2008-09-01 11:48 ` Ben Hutchings [this message]
2008-09-01 11:48 ` [PATCH 30/52] sfc: Make PHY flash mode a device attribute, not a module parameter Ben Hutchings
2008-09-01 11:48 ` [PATCH 31/52] sfc: Do not call netif_{stop,wake}_queue() before register_netdev Ben Hutchings
2008-09-01 11:48 ` [PATCH 32/52] sfc: Enable TSO for 802.1q VLAN devices Ben Hutchings
2008-09-01 11:48 ` [PATCH 33/52] sfc: Remove efx_nic_dummy_op_int() as redundant with efx_port_dummy_op_int() Ben Hutchings
2008-09-01 11:48 ` [PATCH 34/52] sfc: Remove remnants of multi-port abstraction for MAC registers Ben Hutchings
2008-09-01 11:48 ` [PATCH 35/52] sfc: Remove some unreachable error paths Ben Hutchings
2008-09-01 11:48 ` [PATCH 36/52] sfc: Cleanup reset code Ben Hutchings
2008-09-01 11:48 ` [PATCH 37/52] sfc: Rework the bitfield header so that we can identify fields by bit number Ben Hutchings
2008-09-01 11:49 ` [PATCH 38/52] sfc: Extend self-tests Ben Hutchings
2008-09-01 11:49 ` [PATCH 39/52] sfc: Remove the STATE_RESETTING flag Ben Hutchings
2008-09-01 11:49 ` [PATCH 40/52] sfc: Rework efx_set_multicast_hash() Ben Hutchings
2008-09-03 13:54 ` Jeff Garzik
2008-09-01 11:49 ` [PATCH 42/52] sfc: Fix memory BAR release call on error path Ben Hutchings
2008-09-01 11:49 ` [PATCH 43/52] sfc: Remove workaround for old firmware bug Ben Hutchings
2008-09-01 11:49 ` [PATCH 44/52] sfc: Serialise tenxpress_special_reset() with statistics fetches Ben Hutchings
2008-09-01 11:49 ` [PATCH 45/52] sfc: Don't use EFX_OWORD_FIELD on an event (64-bit, quad-word) Ben Hutchings
2008-09-01 11:49 ` [PATCH 46/52] sfc: Make queue flushes more reliable Ben Hutchings
2008-09-01 11:49 ` [PATCH 47/52] sfc: Don't include net_driver.h from falcon_io.h Ben Hutchings
2008-09-01 11:50 ` [PATCH 48/52] sfc: Stop generating bogus events in tenxpress_check_hw() Ben Hutchings
2008-09-01 11:50 ` [PATCH 49/52] sfc: Insert read memory barrier after checking MAC statistics flag Ben Hutchings
2008-09-01 11:50 ` [PATCH 50/52] sfc: Disable interrupts after a fatal interrupt occurs until reset Ben Hutchings
2008-09-01 11:50 ` [PATCH 51/52] sfc: Remove obsolete comment about PCI modes Ben Hutchings
2008-09-01 11:50 ` [PATCH 52/52] sfc: Use CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS where appropriate Ben Hutchings
2008-09-03 14:07 ` [PATCH 41/52] sfc: Add check for memory allocation failure in falcon_probe_nic() Ben Hutchings
2008-09-13 19:29 ` Jeff Garzik
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080901114811.GW7908@solarflare.com \
--to=bhutchings@solarflare.com \
--cc=jgarzik@pobox.com \
--cc=linux-net-drivers@solarflare.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).