From: Simon Horman <horms@verge.net.au>
To: Julius Volz <juliusv@google.com>
Cc: netdev@vger.kernel.org, lvs-devel@vger.kernel.org,
kaber@trash.net, vbusam@google.com
Subject: Re: [PATCHv3 00/24] Add first IPv6 support to IPVS
Date: Fri, 5 Sep 2008 11:25:55 +1000 [thread overview]
Message-ID: <20080905012554.GC14128@verge.net.au> (raw)
In-Reply-To: <1220363755-9854-1-git-send-email-juliusv@google.com>
On Tue, Sep 02, 2008 at 03:55:31PM +0200, Julius Volz wrote:
> Hi Horms,
>
> Here comes the whole batch again! I've fixed almost all style issues
> reported by checkpatch.pl, except for some little things which look like
> they could stay like they are for now (down to 3 warnings and 2 errors).
> I also integrated your other comments and removed the patch that
> adds the changelog information (not needed anymore, according to
> Stephen).
>
> These patches are based on lvs-2.6:
>
> git://git.kernel.org/pub/scm/linux/kernel/git/horms/lvs-2.6.git
>
> - Full kernel patch in one file:
> http://www-user.tu-chemnitz.de/~volz/ipvs_ipv6/ipvs_ipv6_v3.patch
>
> While not all IPv6 features are working or tested, existing IPv4 features
> should still work as before. However, to use any of the new features, you
> will need a new ipvsadm with support for genetlink and IPv6:
>
> http://sixpak.org/vince/google/ipvsadm/
> (by Vince Busam)
>
> To enable IPv6 support in IPVS, set CONFIG_IP_VS_IPV6=y.
>
> Short overview:
>
> What works with IPv6:
> - forwarding mechanisms: NAT, DR, maybe Tunnel (not fully tested yet)
> - protocols: TCP, UDP, ESP, AH (last two not tested)
> - manipulation and inspection of both IPv4 and IPv6 entries with ipvsadm
> - 6 out of 10 schedulers
>
> What is not supported with IPv6:
> - handling fragmentation or other extension headers
> - FTP application helper (can be loaded, but only operates on v4)
> - sync daemon (can be started, but only operates on v4)
> - probably some incorrect handling of ICMPv6 or other corner cases
>
> Since fragmentation and extension headers should not occur very often,
> things should "mostly" work. I tested HTTP and DNS over NAT and DR
> with various supported schedulers without encountering any problems.
> But we didn't test any exotic situations. Also, there are some TODOs
> in the code for things that haven't been tested or implemented yet.
>
> Thanks for any comments!
Hi Julius, Hi Vince,
I have applied all of these patches to the lvs-next-2.6 branch
of the lvs-2.6 tree and I will ask Dave to pull these into
net-next-2.6 shortly.
git://git.kernel.org/pub/scm/linux/kernel/git/horms/lvs-2.6.git
next prev parent reply other threads:[~2008-09-05 1:25 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-02 13:55 [PATCHv3 00/24] Add first IPv6 support to IPVS Julius Volz
2008-09-02 13:55 ` [PATCHv3 01/24] IPVS: Add CONFIG_IP_VS_IPV6 option for IPv6 support Julius Volz
2008-09-02 13:55 ` [PATCHv3 02/24] IPVS: Change IPVS data structures to support IPv6 addresses Julius Volz
2008-09-02 13:55 ` [PATCHv3 03/24] IPVS: Add general v4/v6 helper functions / data structures Julius Volz
2008-09-02 13:55 ` [PATCHv3 04/24] IPVS: Add debug macros for v4 and v6 address output Julius Volz
2008-09-02 13:55 ` [PATCHv3 05/24] IPVS: Add internal versions of sockopt interface structs Julius Volz
2008-09-02 13:55 ` [PATCHv3 06/24] IPVS: Convert __ip_vs_svc_get() and __ip_vs_fwm_get() Julius Volz
2008-09-02 13:55 ` [PATCHv3 07/24] IPVS: Add v6 support to ip_vs_service_get() Julius Volz
2008-09-02 13:55 ` [PATCHv3 08/24] IPVS: Add IPv6 support flag to schedulers Julius Volz
2008-09-02 13:55 ` [PATCHv3 09/24] IPVS: Add 'af' args to protocol handler functions Julius Volz
2008-09-02 13:55 ` [PATCHv3 10/24] IPVS: Add protocol debug functions for IPv6 Julius Volz
2008-09-05 12:43 ` [PATCH] ipvs: Mark tcp/udp v4 and v6 debug functions static Sven Wegener
2008-09-02 13:55 ` [PATCHv3 11/24] IPVS: Extend protocol DNAT/SNAT and state handlers Julius Volz
2008-09-02 13:55 ` [PATCHv3 12/24] IPVS: Extend functions for getting/creating connections Julius Volz
2008-09-05 11:46 ` [PATCH] ipvs: Use pointer to address from sync message Sven Wegener
2008-09-05 12:28 ` Julius Volz
2008-09-06 4:26 ` Simon Horman
2008-09-06 9:04 ` Julius Volz
2008-09-08 1:47 ` Simon Horman
2008-09-02 13:55 ` [PATCHv3 13/24] IPVS: Add IPv6 support to xmit() support functions Julius Volz
2008-09-02 13:55 ` [PATCHv3 14/24] IPVS: Add and bind IPv6 xmit functions Julius Volz
2008-09-02 13:55 ` [PATCHv3 15/24] IPVS: Extend scheduling functions for IPv6 support Julius Volz
2008-09-02 13:55 ` [PATCHv3 16/24] IPVS: Add/adjust Netfilter hook functions and helpers for v6 Julius Volz
2008-09-03 5:44 ` Simon Horman
2008-09-03 9:01 ` Julius Volz
2008-09-05 0:47 ` Simon Horman
2008-09-02 13:55 ` [PATCHv3 17/24] IPVS: Convert real server lookup functions Julius Volz
2008-09-02 13:55 ` [PATCHv3 18/24] IPVS: Convert procfs files for IPv6 entry output Julius Volz
2008-09-02 13:55 ` [PATCHv3 19/24] IVPS: Disable sync daemon for IPv6 connections Julius Volz
2008-09-02 13:55 ` [PATCHv3 20/24] IPVS: Turn off FTP application helper for IPv6 Julius Volz
2008-09-02 13:55 ` [PATCHv3 21/24] IPVS: Add function to determine if IPv6 address is local Julius Volz
2008-09-05 14:53 ` [PATCH] ipvs: Reject ipv6 link-local addresses for destinations Sven Wegener
2008-09-02 13:55 ` [PATCHv3 22/24] IPVS: Adjust various debug outputs to use new macros Julius Volz
2008-09-02 13:55 ` [PATCHv3 23/24] IPVS: Activate IPv6 Netfilter hooks Julius Volz
2008-09-02 13:55 ` [PATCHv3 24/24] IPVS: Allow adding IPv6 services from userspace Julius Volz
2008-09-05 11:47 ` [PATCH] ipvs: Return negative error values from ip_vs_edit_service() Sven Wegener
2008-09-03 0:40 ` [PATCHv3 00/24] Add first IPv6 support to IPVS Simon Horman
2008-09-03 9:03 ` Julius Volz
2008-09-05 1:25 ` Simon Horman [this message]
2008-09-05 11:05 ` Julius Volz
-- strict thread matches above, loose matches on Subject: below --
2008-09-02 13:50 Julius Volz
2008-09-02 13:50 ` Julius Volz
2008-09-02 13:50 ` Julius Volz
2008-09-02 13:50 ` Julius Volz
2008-09-02 13:54 ` Julius Volz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080905012554.GC14128@verge.net.au \
--to=horms@verge.net.au \
--cc=juliusv@google.com \
--cc=kaber@trash.net \
--cc=lvs-devel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=vbusam@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).