netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jay Cliburn <jacliburn@bellsouth.net>
To: adobriyan@gmail.com
Cc: csnook@redhat.com, netdev@vger.kernel.org
Subject: Re: atl1: WARNING at net/sched/sch_generic.c:221
Date: Sun, 14 Sep 2008 18:17:14 -0500	[thread overview]
Message-ID: <20080914181714.34935d9c@osprey.hogchain.net> (raw)
In-Reply-To: <20080821115849.GA2126@x200.localdomain>

On Thu, 21 Aug 2008 15:58:49 +0400
adobriyan@gmail.com wrote:

> This message happens more or less every reboot, sometimes cable
> unplug/plug is needed to restore connectivity, otherwise card is
> working fine.
> 
> 
> [   22.570010] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
> [   26.570011] NET: Registered protocol family 10
> [   37.551934] eth0: no IPv6 routers present
> 
> 	[rebooted box which is directly connected to a box with atl1]
> 
> [ 2078.740004] atl1 0000:03:00.0: eth0 link is down
> [ 2080.790004] atl1 0000:03:00.0: eth0 link is up 1000 Mbps full
> duplex [ 2086.049998] NETDEV WATCHDOG: eth0 (atl1): transmit timed out
> [ 2086.050004] ------------[ cut here ]------------
> [ 2086.050004] WARNING: at net/sched/sch_generic.c:221
[...]

Alexey,

Can you please try this patch?

diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index e23ce77..e00a986 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -2642,6 +2642,7 @@ static void atl1_down(struct atl1_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 
+	netif_stop_queue(netdev);
 	del_timer_sync(&adapter->watchdog_timer);
 	del_timer_sync(&adapter->phy_config_timer);
 	adapter->phy_timer_pending = false;
@@ -2655,7 +2656,6 @@ static void atl1_down(struct atl1_adapter *adapter)
 	adapter->link_speed = SPEED_0;
 	adapter->link_duplex = -1;
 	netif_carrier_off(netdev);
-	netif_stop_queue(netdev);
 
 	atl1_clean_tx_ring(adapter);
 	atl1_clean_rx_ring(adapter);
@@ -2724,6 +2724,8 @@ static int atl1_open(struct net_device *netdev)
 	struct atl1_adapter *adapter = netdev_priv(netdev);
 	int err;
 
+	netif_carrier_off(netdev);
+
 	/* allocate transmit descriptors */
 	err = atl1_setup_ring_resources(adapter);
 	if (err)
diff --git a/drivers/net/atlx/atlx.c b/drivers/net/atlx/atlx.c
index b3e7fcf..3cc9d10 100644
--- a/drivers/net/atlx/atlx.c
+++ b/drivers/net/atlx/atlx.c
@@ -105,7 +105,6 @@ static void atlx_check_for_link(struct atlx_adapter *adapter)
 				netdev->name);
 			adapter->link_speed = SPEED_0;
 			netif_carrier_off(netdev);
-			netif_stop_queue(netdev);
 		}
 	}
 	schedule_work(&adapter->link_chg_task);
-- 
1.5.5.1

  parent reply	other threads:[~2008-09-14 23:17 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-21 11:58 atl1: WARNING at net/sched/sch_generic.c:221 adobriyan
2008-08-21 11:59 ` David Miller
2008-08-21 12:04   ` adobriyan
2008-08-21 12:08     ` David Miller
2008-09-14 19:26       ` Jay Cliburn
2008-09-14 19:58         ` Stephen Hemminger
2008-09-14 23:56         ` David Miller
2008-09-15  0:11           ` Jay Cliburn
2008-09-15  3:14           ` Jeff Garzik
2008-08-22  2:00 ` Jay Cliburn
2008-08-22 21:50   ` Jay Cliburn
2008-09-14 23:17 ` Jay Cliburn [this message]
2008-09-15 22:45   ` Alexey Dobriyan
2008-09-16  1:44     ` Jay Cliburn
2008-09-17  7:44       ` Alexey Dobriyan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080914181714.34935d9c@osprey.hogchain.net \
    --to=jacliburn@bellsouth.net \
    --cc=adobriyan@gmail.com \
    --cc=csnook@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).