Re: atl1: WARNING at net/sched/sch_generic.c:221

[Jay Cliburn <jacliburn@bellsouth.net>]

On Tue, 16 Sep 2008 02:45:22 +0400
Alexey Dobriyan <adobriyan@gmail.com> wrote:

> On Sun, Sep 14, 2008 at 06:17:14PM -0500, Jay Cliburn wrote:
> > On Thu, 21 Aug 2008 15:58:49 +0400
> > adobriyan@gmail.com wrote:
> > 
> > > This message happens more or less every reboot, sometimes cable
> > > unplug/plug is needed to restore connectivity, otherwise card is
> > > working fine.
> > > 
> > > 
> > > [   22.570010] eth1: link up, 100Mbps, full-duplex, lpa 0x45E1
> > > [   26.570011] NET: Registered protocol family 10
> > > [   37.551934] eth0: no IPv6 routers present
> > > 
> > > 	[rebooted box which is directly connected to a box with
> > > atl1]
> > > 
> > > [ 2078.740004] atl1 0000:03:00.0: eth0 link is down
> > > [ 2080.790004] atl1 0000:03:00.0: eth0 link is up 1000 Mbps full
> > > duplex [ 2086.049998] NETDEV WATCHDOG: eth0 (atl1): transmit
> > > timed out [ 2086.050004] ------------[ cut here ]------------
> > > [ 2086.050004] WARNING: at net/sched/sch_generic.c:221
> > [...]
> > 
> > Alexey,
> > 
> > Can you please try this patch?
> 
> Seems to help (no more messages), still sometimes no networking until
> after cable replug. Stay tuned.

Does this stay tuned mean, "Jay, hold off while I (Alexey) troubleshoot
this further."  Or does it mean, "Jay, you've not completely solved the
problem yet and you need to continue working on it."  If it's the
latter, can you please describe your setup and how you reproduce the
problem?  Is the box you have connected directly to the atl1 box used
as a netconsole?

Thanks for your help.

Jay