From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Francois Romieu <romieu@fr.zoreil.com>
Cc: John Gumb <john.gumb@tandberg.com>,
linux-kernel@vger.kernel.org, netdev@vger.kernel.org, "Kok,
Auke" <auke-jan.h.kok@intel.com>
Subject: Re: D945GCLF intel atom board & r8169 ethernet broken in linux-2.6.27-rc5??
Date: Fri, 26 Sep 2008 23:45:46 +0200 [thread overview]
Message-ID: <200809262345.47373.rjw@sisk.pl> (raw)
In-Reply-To: <20080924201903.GA10546@electric-eye.fr.zoreil.com>
On Wednesday, 24 of September 2008, Francois Romieu wrote:
> John Gumb <john.gumb@tandberg.com> :
> [...]
> > With linux-2.6.27-rc5, "ifconfig eth0" just hangs. lspci -vvx reports,
> > after loading the driver,
> >
> > > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E
> > PCI Express Fast Ethernet controller (rev ff) (prog-if ff)
> > > !!! Unknown header type 7f
> > 00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> > 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
> >
> > Before I load the driver lspci -vvx looks OK.
>
> It is probably the driver's responsibility then.
>
> > I do not have (much) time to look into this any further but hopefully
> > this might help someone.
>
> Can you try patches #0001 .. #0008 at
> http://userweb.kernel.org/~romieu/r8169/2.6.27-rc6/20080913/ ?
FWIW, these patches make the Ethernet card in the MSI Wind I've been recently
testing work much much more reliably. :-)
Thanks,
Rafael
next prev parent reply other threads:[~2008-09-26 21:40 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-24 11:26 D945GCLF intel atom board & r8169 ethernet broken in linux-2.6.27-rc5?? John Gumb
2008-09-24 18:37 ` Kok, Auke
2008-09-24 20:19 ` Francois Romieu
2008-09-26 21:45 ` Rafael J. Wysocki [this message]
2008-09-26 21:52 ` Francois Romieu
2008-09-26 22:27 ` Rafael J. Wysocki
2008-09-24 22:26 ` Jiri Kosina
2008-09-24 22:27 ` Jiri Kosina
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200809262345.47373.rjw@sisk.pl \
--to=rjw@sisk.pl \
--cc=auke-jan.h.kok@intel.com \
--cc=john.gumb@tandberg.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=romieu@fr.zoreil.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).