From: Andrew Morton <akpm@linux-foundation.org>
To: netdev@vger.kernel.org
Cc: bugme-daemon@bugzilla.kernel.org, domen@coderock.org,
Roger Luethi <rl@hellgate.ch>
Subject: Re: [Bugme-new] [Bug 11663] New: via-rhine warn_on_slowpath (eth0: Transmit timed out, status 0000, PHY status 786d, resetting...)
Date: Sat, 27 Sep 2008 15:35:41 -0700 [thread overview]
Message-ID: <20080927153541.58290a83.akpm@linux-foundation.org> (raw)
In-Reply-To: <bug-11663-10286@http.bugzilla.kernel.org/>
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
> On Sat, 27 Sep 2008 13:49:23 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=11663
>
> Summary: via-rhine warn_on_slowpath (eth0: Transmit timed out,
> status 0000, PHY status 786d, resetting...)
> Product: Drivers
> Version: 2.5
> KernelVersion: 2.6.26
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: low
> Priority: P1
> Component: Network
> AssignedTo: jgarzik@pobox.com
> ReportedBy: domen@coderock.org
>
>
> Latest working kernel version: /
> Earliest failing kernel version: /
> Distribution: Slackware
> Hardware Environment:
> 00:0a.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 8b)
> 00:0b.0 Ethernet controller: VIA Technologies, Inc. VT6105 [Rhine-III] (rev 8b)
> 00:0a.0 0200: 1106:3106 (rev 8b)
> Subsystem: 1106:0105
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 5
> Region 0: I/O ports at a000 [size=256]
> Region 1: Memory at e2000000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: via-rhine
> Kernel modules: via-rhine
>
> 00:0b.0 0200: 1106:3106 (rev 8b)
> Subsystem: 1106:0105
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 12
> Region 0: I/O ports at a400 [size=256]
> Region 1: Memory at e2001000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [44] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: via-rhine
> Kernel modules: via-rhine
>
> Software Environment: /
> Problem Description:
> Warning in kernel log:
> [163481.000027] NETDEV WATCHDOG: eth0: transmit timed out
> [163481.000187] eth0: Transmit timed out, status 0000, PHY status 786d,
> resetting...
> [163481.000887] eth0: link up, 100Mbps, full-duplex, lpa 0x43E1
> [163481.000912] ------------[ cut here ]------------
> [163481.000916] WARNING: at
> /home/domen/kernel/linux-2.6.26/net/sched/sch_generic.c:222
> dev_watchdog+0xba/0xd0()
> [163481.000920] Modules linked in: tcp_diag inet_diag snd_seq_dummy snd_seq_oss
> snd_seq_midi_event snd_seq snd_pcm_oss snd_mixer_oss l2cap ipv6 binfmt_misc
> it87 hwmon_vid hwmon psmouse fuse ati_remote2 hci_usb bluetooth usbhid hid
> snd_mpu401 snd_cs4232 snd_opl3_lib snd_hwdep ns558 snd_cs4231_lib fan rtc_cmos
> rtc_core rtc_lib parport_pc parport thermal snd_via82xx gameport snd_ac97_codec
> ac97_bus button processor snd_pcm snd_timer snd_page_alloc snd_mpu401_uart
> snd_rawmidi snd_seq_device i2c_viapro i2c_core snd soundcore ehci_hcd via_agp
> via_rhine uhci_hcd mii agpgart shpchp evdev
> [163481.000975] Pid: 0, comm: swapper Not tainted 2.6.26 #2
> [163481.000982] [<c011a60f>] warn_on_slowpath+0x5f/0x90
> [163481.001001] [<f0838115>] rhine_enable_linkmon+0x45/0xa0 [via_rhine]
> [163481.001022] [<f0839aa3>] mdio_read+0xb3/0xc0 [via_rhine]
> [163481.001032] [<c011b50b>] printk+0x1b/0x20
> [163481.001039] [<f081352d>] mii_check_media+0x13d/0x1e0 [mii]
> [163481.001051] [<c0141130>] default_enable+0x10/0x20
> [163481.001063] [<c01410cd>] check_irq_resend+0x1d/0x70
> [163481.001069] [<c0140965>] __enable_irq+0x55/0x60
> [163481.001074] [<f0838abd>] init_registers+0xad/0xd0 [via_rhine]
> [163481.001083] [<f083a359>] rhine_tx_timeout+0xc9/0x100 [via_rhine]
> [163481.001094] [<c0352dfa>] dev_watchdog+0xba/0xd0
> [163481.001099] [<c0122570>] run_timer_softirq+0x110/0x160
> [163481.001113] [<c011ee52>] __do_softirq+0x42/0x90
> [163481.001118] [<c011eec7>] do_softirq+0x27/0x30
> [163481.001123] [<c011f1c5>] irq_exit+0x45/0x60
> [163481.001126] [<c0104cc9>] do_IRQ+0x39/0x70
> [163481.001134] [<c012e102>] enqueue_hrtimer+0x72/0xf0
> [163481.001140] [<f0a027d5>] acpi_processor_idle+0x0/0x3e3 [processor]
> [163481.001158] [<c0103113>] common_interrupt+0x23/0x28
> [163481.001167] [<f0a02a3f>] acpi_processor_idle+0x26a/0x3e3 [processor]
> [163481.001177] [<f0a027d5>] acpi_processor_idle+0x0/0x3e3 [processor]
> [163481.001187] [<c0101aa7>] cpu_idle+0x37/0x80
> [163481.001194] =======================
> [163481.001197] ---[ end trace b2677aed7c2c6876 ]---
>
>
> Steps to reproduce: dunno
>
parent reply other threads:[~2008-09-27 22:35 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <bug-11663-10286@http.bugzilla.kernel.org/>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080927153541.58290a83.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=bugme-daemon@bugzilla.kernel.org \
--cc=domen@coderock.org \
--cc=netdev@vger.kernel.org \
--cc=rl@hellgate.ch \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).