From: Lennert Buytenhek <buytenh@wantstofly.org>
To: netdev@vger.kernel.org
Cc: Byron Bradley <byron.bbradley@gmail.com>,
Jesper Dangaard Brouer <jdb@comx.dk>,
Tim Ellis <tim.ellis@mac.com>,
Andy Fleming <afleming@freescale.com>,
Imre Kaloz <kaloz@openwrt.org>, Nicolas Pitre <nico@cam.org>,
Dirk Teurlings <dirk@upexia.nl>,
Peter van Valderen <p.v.valderen@gmail.com>
Subject: [PATCH 1/6] phylib: add mdiobus_{read,write}
Date: Mon, 29 Sep 2008 04:37:48 +0200 [thread overview]
Message-ID: <20080929023748.GG21560@xi.wantstofly.org> (raw)
Add mdiobus_{read,write} routines to allow direct reading/writing
of registers on an mii bus without having to go through the PHY
abstraction, and make phy_{read,write} use these primitives.
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com>
---
drivers/net/phy/mdio_bus.c | 49 ++++++++++++++++++++++++++++++++++++++++++++
drivers/net/phy/phy.c | 22 +------------------
include/linux/phy.h | 2 +
3 files changed, 53 insertions(+), 20 deletions(-)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index f9c27ac..0db3605 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -210,6 +210,55 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr)
EXPORT_SYMBOL(mdiobus_scan);
/**
+ * mdiobus_read - Convenience function for reading a given MII mgmt register
+ * @bus: the mii_bus struct
+ * @addr: the phy address
+ * @regnum: register number to read
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int mdiobus_read(struct mii_bus *bus, int addr, u16 regnum)
+{
+ int retval;
+
+ BUG_ON(in_interrupt());
+
+ mutex_lock(&bus->mdio_lock);
+ retval = bus->read(bus, addr, regnum);
+ mutex_unlock(&bus->mdio_lock);
+
+ return retval;
+}
+EXPORT_SYMBOL(mdiobus_read);
+
+/**
+ * mdiobus_write - Convenience function for writing a given MII mgmt register
+ * @bus: the mii_bus struct
+ * @addr: the phy address
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ *
+ * NOTE: MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation.
+ */
+int mdiobus_write(struct mii_bus *bus, int addr, u16 regnum, u16 val)
+{
+ int err;
+
+ BUG_ON(in_interrupt());
+
+ mutex_lock(&bus->mdio_lock);
+ err = bus->write(bus, addr, regnum, val);
+ mutex_unlock(&bus->mdio_lock);
+
+ return err;
+}
+EXPORT_SYMBOL(mdiobus_write);
+
+/**
* mdio_bus_match - determine if given PHY driver supports the given PHY device
* @dev: target PHY device
* @drv: given PHY driver
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index 0433fcd..a58cbd6 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -68,16 +68,7 @@ EXPORT_SYMBOL(phy_print_status);
*/
int phy_read(struct phy_device *phydev, u16 regnum)
{
- int retval;
- struct mii_bus *bus = phydev->bus;
-
- BUG_ON(in_interrupt());
-
- mutex_lock(&bus->mdio_lock);
- retval = bus->read(bus, phydev->addr, regnum);
- mutex_unlock(&bus->mdio_lock);
-
- return retval;
+ return mdiobus_read(phydev->bus, phydev->addr, regnum);
}
EXPORT_SYMBOL(phy_read);
@@ -93,16 +84,7 @@ EXPORT_SYMBOL(phy_read);
*/
int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
{
- int err;
- struct mii_bus *bus = phydev->bus;
-
- BUG_ON(in_interrupt());
-
- mutex_lock(&bus->mdio_lock);
- err = bus->write(bus, phydev->addr, regnum, val);
- mutex_unlock(&bus->mdio_lock);
-
- return err;
+ return mdiobus_write(phydev->bus, phydev->addr, regnum, val);
}
EXPORT_SYMBOL(phy_write);
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 891f27f..ddfb7fd 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -421,6 +421,8 @@ int mdiobus_register(struct mii_bus *bus);
void mdiobus_unregister(struct mii_bus *bus);
void mdiobus_free(struct mii_bus *bus);
struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
+int mdiobus_read(struct mii_bus *bus, int addr, u16 regnum);
+int mdiobus_write(struct mii_bus *bus, int addr, u16 regnum, u16 val);
void phy_sanitize_settings(struct phy_device *phydev);
int phy_stop_interrupts(struct phy_device *phydev);
--
1.5.6.4
next reply other threads:[~2008-09-29 2:37 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-09-29 2:37 Lennert Buytenhek [this message]
2008-09-29 20:27 ` [PATCH 1/6] phylib: add mdiobus_{read,write} Trent Piepho
2008-09-29 21:10 ` Lennert Buytenhek
2008-09-29 23:30 ` Andy Fleming
2008-09-30 3:12 ` Lennert Buytenhek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20080929023748.GG21560@xi.wantstofly.org \
--to=buytenh@wantstofly.org \
--cc=afleming@freescale.com \
--cc=byron.bbradley@gmail.com \
--cc=dirk@upexia.nl \
--cc=jdb@comx.dk \
--cc=kaloz@openwrt.org \
--cc=netdev@vger.kernel.org \
--cc=nico@cam.org \
--cc=p.v.valderen@gmail.com \
--cc=tim.ellis@mac.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox