Re: two other cases Re: [Bug 11721] after upgrade to 2.6.27 i cannot navigate

[Jarek Poplawski <jarkao2@gmail.com>]

On Tue, Oct 21, 2008 at 01:51:10PM +0300, Ilpo Järvinen wrote:
> On Tue, 21 Oct 2008, Jarek Poplawski wrote:
> 
> > On Tue, Oct 21, 2008 at 12:36:33PM +0300, Ilpo Järvinen wrote:
> > ...
> > > Can you try this another debug patch below (on 2.6.27.2 is fine). It moves 
> > > the mss to the last position but should keep timestamps in place by making 
> > > wscale as first option. It is well possible that you won't get it working 
> > > at all except with all ts,sack and wscale set to 0 (the most likely 
> > > result). Please try with all wscale,sack,ts combinations (no need to 
> > > provide dumps, just working/not working per case)... This should 
> > > tell us for quite high certaintity what is the actual option which is 
> > > causing this (would it not be the mss-at-beginning which is the most 
> > > likely cause), [...]
> > 
> > I'd like to remind it seems to work with only sack off, so mss after
> > ts. If so, my suspicion would be around rfc's/options' dating?
> 
> Thanks, I missed that case... there are so many cases already... :-)
> ...I'm not sure we'll find some very obvious reason for this, rfc dating 
> probably has very little to do here.
> 
> I still think that putting an alternative option in front is useful test 
> (though my initial mss-at-beginning thought wasn't bullet-proof) but 
> maybe we could skip all those alternative settings of wscale,sack,ts and 
> have them just all enabled.

I agree with you, but when this test with all options enabled fails
(?!), IMHO disabling sack only could be enough to get it working
again.

Jarek P.