From: Jeff Garzik <jeff@garzik.org>
To: David Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org, LKML <linux-kernel@vger.kernel.org>
Subject: [git patches] net driver fixes for 2.6.28-rc
Date: Mon, 3 Nov 2008 15:51:22 -0500 [thread overview]
Message-ID: <20081103205121.GA6005@havoc.gtf.org> (raw)
Please pull from 'davem-fixes' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git davem-fixes
to receive the following updates:
drivers/net/Kconfig | 18 +++++++++++++++---
drivers/net/fs_enet/fs_enet-main.c | 6 ++++--
drivers/net/mv643xx_eth.c | 9 ++++++---
3 files changed, 25 insertions(+), 8 deletions(-)
Alexey Dobriyan (1):
fs_enet: fix polling
Jeff Kirsher (1):
net: kconfig cleanup
Lennert Buytenhek (1):
mv643xx_eth: fix SMI bus access timeouts
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index f749b40..11f143f 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2010,9 +2010,13 @@ config IGB_LRO
If in doubt, say N.
config IGB_DCA
- bool "Enable DCA"
+ bool "Direct Cache Access (DCA) Support"
default y
depends on IGB && DCA && !(IGB=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
source "drivers/net/ixp2000/Kconfig"
@@ -2437,9 +2441,13 @@ config IXGBE
will be called ixgbe.
config IXGBE_DCA
- bool
+ bool "Direct Cache Access (DCA) Support"
default y
depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
config IXGB
tristate "Intel(R) PRO/10GbE support"
@@ -2489,9 +2497,13 @@ config MYRI10GE
will be called myri10ge.
config MYRI10GE_DCA
- bool
+ bool "Direct Cache Access (DCA) Support"
default y
depends on MYRI10GE && DCA && !(MYRI10GE=y && DCA=m)
+ ---help---
+ Say Y here if you want to use Direct Cache Access (DCA) in the
+ driver. DCA is a method for warming the CPU cache before data
+ is used, with the intent of lessening the impact of cache misses.
config NETXEN_NIC
tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index cb51c1f..a6f49d0 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -1099,7 +1099,9 @@ static int __devinit fs_enet_probe(struct of_device *ofdev,
ndev->stop = fs_enet_close;
ndev->get_stats = fs_enet_get_stats;
ndev->set_multicast_list = fs_set_multicast_list;
-
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ ndev->poll_controller = fs_enet_netpoll;
+#endif
if (fpi->use_napi)
netif_napi_add(ndev, &fep->napi, fs_enet_rx_napi,
fpi->napi_weight);
@@ -1209,7 +1211,7 @@ static void __exit fs_cleanup(void)
static void fs_enet_netpoll(struct net_device *dev)
{
disable_irq(dev->irq);
- fs_enet_interrupt(dev->irq, dev, NULL);
+ fs_enet_interrupt(dev->irq, dev);
enable_irq(dev->irq);
}
#endif
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index a9c8c08..b9dcdbd 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1066,9 +1066,12 @@ static int smi_wait_ready(struct mv643xx_eth_shared_private *msp)
return 0;
}
- if (!wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp),
- msecs_to_jiffies(100)))
- return -ETIMEDOUT;
+ if (!smi_is_done(msp)) {
+ wait_event_timeout(msp->smi_busy_wait, smi_is_done(msp),
+ msecs_to_jiffies(100));
+ if (!smi_is_done(msp))
+ return -ETIMEDOUT;
+ }
return 0;
}
next reply other threads:[~2008-11-03 20:51 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-11-03 20:51 Jeff Garzik [this message]
2008-11-03 21:28 ` [git patches] net driver fixes for 2.6.28-rc David Miller
2008-11-03 22:07 ` Marcel Holtmann
2008-11-03 22:54 ` David Miller
2008-11-03 22:59 ` Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2008-11-14 23:25 Jeff Garzik
2008-11-14 23:48 ` David Miller
2008-11-11 8:58 Jeff Garzik
2008-11-12 0:42 ` David Miller
2008-11-06 6:50 Jeff Garzik
2008-11-06 23:50 ` David Miller
2008-11-04 7:51 Jonathan McDowell
2008-11-04 8:27 ` Marcel Holtmann
2008-11-06 5:42 ` Jeff Garzik
2008-10-31 5:09 Jeff Garzik
2008-10-31 6:52 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20081103205121.GA6005@havoc.gtf.org \
--to=jeff@garzik.org \
--cc=davem@davemloft.net \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).