From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeff Kirsher Subject: [NET-NEXT PATCH 02/14] e1000e: commit speed/duplex changes for m88 PHY Date: Fri, 21 Nov 2008 10:59:22 -0800 Message-ID: <20081121185922.32313.24916.stgit@gitlost.lost> References: <20081121185859.32313.42332.stgit@gitlost.lost> Mime-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org, jeff@garzik.org, Bruce Allan , Jeff Kirsher To: davem@davemloft.net Return-path: Received: from qmta03.emeryville.ca.mail.comcast.net ([76.96.30.32]:34726 "EHLO QMTA03.emeryville.ca.mail.comcast.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752115AbYKUS7q (ORCPT ); Fri, 21 Nov 2008 13:59:46 -0500 In-Reply-To: <20081121185859.32313.42332.stgit@gitlost.lost> Sender: netdev-owner@vger.kernel.org List-ID: From: Bruce Allan Follow the convention used elsewhere in e1000e to 'commit' PHY changes instead of directly writing to the PHY CTRL register to reset it. Signed-off-by: Bruce Allan Signed-off-by: Jeff Kirsher --- drivers/net/e1000e/phy.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index 6cd333a..cb7d71e 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -1030,14 +1030,14 @@ s32 e1000e_phy_force_speed_duplex_m88(struct e1000_hw *hw) e1000e_phy_force_speed_duplex_setup(hw, &phy_data); - /* Reset the phy to commit changes. */ - phy_data |= MII_CR_RESET; - ret_val = e1e_wphy(hw, PHY_CONTROL, phy_data); if (ret_val) return ret_val; - udelay(1); + /* Reset the phy to commit changes. */ + ret_val = e1000e_commit_phy(hw); + if (ret_val) + return ret_val; if (phy->autoneg_wait_to_complete) { hw_dbg(hw, "Waiting for forced speed/duplex link on M88 phy.\n");