netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org,
	Alexander Duyck <alexander.h.duyck@intel.com>,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [NET-NEXT PATCH] igb: Add support for pci-e Advanced Error Reporting
Date: Wed, 26 Nov 2008 16:04:41 -0800	[thread overview]
Message-ID: <20081127000441.22613.99805.stgit@gitlost.lost> (raw)

From: Alexander Duyck <alexander.h.duyck@intel.com>

Add the calls necessary to enable advanced error reporting for igb on
systems with AER enabled.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

 drivers/net/igb/igb_main.c |   30 ++++++++++++++++++++----------
 1 files changed, 20 insertions(+), 10 deletions(-)

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 0919a2f..ea4ef18 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -42,6 +42,7 @@
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/if_ether.h>
+#include <linux/aer.h>
 #ifdef CONFIG_IGB_DCA
 #include <linux/dca.h>
 #endif
@@ -1049,6 +1050,8 @@ static int __devinit igb_probe(struct pci_dev *pdev,
 	if (err)
 		goto err_pci_reg;
 
+	pci_enable_pcie_error_reporting(pdev);
+
 	pci_set_master(pdev);
 	pci_save_state(pdev);
 
@@ -1379,6 +1382,8 @@ static void __devexit igb_remove(struct pci_dev *pdev)
 
 	free_netdev(netdev);
 
+	pci_disable_pcie_error_reporting(pdev);
+
 	pci_disable_device(pdev);
 }
 
@@ -4474,27 +4479,33 @@ static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
 	struct net_device *netdev = pci_get_drvdata(pdev);
 	struct igb_adapter *adapter = netdev_priv(netdev);
 	struct e1000_hw *hw = &adapter->hw;
+	pci_ers_result_t result;
 	int err;
 
 	if (adapter->need_ioport)
 		err = pci_enable_device(pdev);
 	else
 		err = pci_enable_device_mem(pdev);
+
 	if (err) {
 		dev_err(&pdev->dev,
 			"Cannot re-enable PCI device after reset.\n");
-		return PCI_ERS_RESULT_DISCONNECT;
-	}
-	pci_set_master(pdev);
-	pci_restore_state(pdev);
+		result = PCI_ERS_RESULT_DISCONNECT;
+	} else {
+		pci_set_master(pdev);
+		pci_restore_state(pdev);
 
-	pci_enable_wake(pdev, PCI_D3hot, 0);
-	pci_enable_wake(pdev, PCI_D3cold, 0);
+		pci_enable_wake(pdev, PCI_D3hot, 0);
+		pci_enable_wake(pdev, PCI_D3cold, 0);
 
-	igb_reset(adapter);
-	wr32(E1000_WUS, ~0);
+		igb_reset(adapter);
+		wr32(E1000_WUS, ~0);
+		result = PCI_ERS_RESULT_RECOVERED;
+	}
 
-	return PCI_ERS_RESULT_RECOVERED;
+	pci_cleanup_aer_uncorrect_error_status(pdev);
+
+	return result;
 }
 
 /**
@@ -4522,7 +4533,6 @@ static void igb_io_resume(struct pci_dev *pdev)
 	/* let the f/w know that the h/w is now under the control of the
 	 * driver. */
 	igb_get_hw_control(adapter);
-
 }
 
 /* igb_main.c */


             reply	other threads:[~2008-11-27  0:04 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-27  0:04 Jeff Kirsher [this message]
2008-11-27  0:54 ` [NET-NEXT PATCH] igb: Add support for pci-e Advanced Error Reporting Stephen Hemminger
2008-11-27  8:24 ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081127000441.22613.99805.stgit@gitlost.lost \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=alexander.h.duyck@intel.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).