On Thursday 22 January 2009 09:25:41 Jarek Poplawski wrote: > On 21-01-2009 15:33, Denys Fedoryschenko wrote: > ... > > > It is some "tokens" that used to refill bucket each piece of time > > (related with get_hz and rate?) > > Is there any place i can read about this? > > http://en.wikipedia.org/wiki/Token_bucket > > Jarek P. > -- > To unsubscribe from this list: send the line "unsubscribe netdev" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html Thanks a lot. Seems also Martin Devera pointed me, what can be issue. HZ=1000000000 is way too high. Real tests shows, that HZ=1000 more than enough with hrtimers on. By the way possible it is triggered deadlock bug in htb, it is not a fix of this bug, but a fix of very wrong behaviour, because of this bug HTB will use very extensively resources. If it's required, i can give more detailed explanation -------------> iproute2 : invalid burst/cburst calculation with hrtimers If hrtimers on, /proc/net/psched shows 4th variable as 1000000000 Because burst calculated by division rate to this variable, it will be almost always zero. As result, we will get higher system load on low rates, and on high rates shaper will not able to process data. It is checked and proved. Core 2 Quad was not able to shape 200Mbps, and gave only 180-190. It is more safe to set it to 1000HZ. If user wants, he can set custom "env" HZ variable. Signed-off-by: Denys Fedoryschenko ---