From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, jeff@garzik.org, gospo@redhat.com,
Don Skidmore <donald.c.skidmore@intel.com>,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next PATCH 1/3] ixgbe: Add 82598 support for BX mezzanine devices
Date: Fri, 30 Jan 2009 17:05:33 -0800 [thread overview]
Message-ID: <20090131010530.1820.5846.stgit@lost.foo-projects.org> (raw)
From: Don Skidmore <donald.c.skidmore@intel.com>
Add the device ID for BX devices using the 82598 MAC.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_82598.c | 4 +++-
drivers/net/ixgbe/ixgbe_ethtool.c | 8 ++++++++
drivers/net/ixgbe/ixgbe_main.c | 2 ++
drivers/net/ixgbe/ixgbe_type.h | 1 +
4 files changed, 14 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 6c7ddb9..dffe7f0 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -214,7 +214,7 @@ static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
/* Media type for I82598 is based on device ID */
switch (hw->device_id) {
case IXGBE_DEV_ID_82598:
- /* Default device ID is mezzanine card KX/KX4 */
+ case IXGBE_DEV_ID_82598_BX:
media_type = ixgbe_media_type_backplane;
break;
case IXGBE_DEV_ID_82598AF_DUAL_PORT:
@@ -1011,6 +1011,8 @@ static s32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw)
physical_layer = (IXGBE_PHYSICAL_LAYER_10GBASE_KX4 |
IXGBE_PHYSICAL_LAYER_1000BASE_KX);
break;
+ case IXGBE_DEV_ID_82598_BX:
+ physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX;
case IXGBE_DEV_ID_82598EB_CX4:
case IXGBE_DEV_ID_82598_CX4_DUAL_PORT:
physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4;
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index 444200f..69eda89 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -141,6 +141,14 @@ static int ixgbe_get_settings(struct net_device *netdev,
ADVERTISED_FIBRE);
ecmd->port = PORT_FIBRE;
break;
+ case IXGBE_DEV_ID_82598_BX:
+ ecmd->supported = (SUPPORTED_1000baseT_Full |
+ SUPPORTED_FIBRE);
+ ecmd->advertising = (ADVERTISED_1000baseT_Full |
+ ADVERTISED_FIBRE);
+ ecmd->port = PORT_FIBRE;
+ ecmd->autoneg = AUTONEG_DISABLE;
+ break;
}
} else {
ecmd->supported |= SUPPORTED_FIBRE;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index fe4a4d1..f348176 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -84,6 +84,8 @@ static struct pci_device_id ixgbe_pci_tbl[] = {
board_82598 },
{PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM),
board_82598 },
+ {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX),
+ board_82598 },
/* required last entry */
{0, }
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index e43f0c7..883ff82 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -35,6 +35,7 @@
/* Device IDs */
#define IXGBE_DEV_ID_82598 0x10B6
+#define IXGBE_DEV_ID_82598_BX 0x1508
#define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6
#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
#define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB
next reply other threads:[~2009-01-31 1:05 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-31 1:05 Jeff Kirsher [this message]
2009-01-31 1:05 ` [net-next PATCH 2/3] ixgbe: Refactor MSI-X allocation mechanism Jeff Kirsher
2009-02-01 9:19 ` David Miller
2009-01-31 1:06 ` [net-next PATCH 3/3] ixgbe: Update copyright dates, bump the driver version number Jeff Kirsher
2009-02-01 9:19 ` David Miller
2009-02-01 9:19 ` [net-next PATCH 1/3] ixgbe: Add 82598 support for BX mezzanine devices David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090131010530.1820.5846.stgit@lost.foo-projects.org \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=donald.c.skidmore@intel.com \
--cc=gospo@redhat.com \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
--cc=peter.p.waskiewicz.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).