From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, jeff@garzik.org, gospo@redhat.com,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next PATCH 2/3] ixgbe: Refactor MSI-X allocation mechanism
Date: Fri, 30 Jan 2009 17:05:56 -0800 [thread overview]
Message-ID: <20090131010556.1820.28773.stgit@lost.foo-projects.org> (raw)
In-Reply-To: <20090131010530.1820.5846.stgit@lost.foo-projects.org>
From: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Our current MSI-X allocation mechanism does not support new hardware
at all. It also isn't getting the actual number of supported MSI-X vectors
from the device.
This patch allows the number of MSI-X vectors to be specific to a device,
plus it gets the number of MSI-X vectors available from PCIe configuration
space.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe.h | 9 +++++++--
drivers/net/ixgbe/ixgbe_82598.c | 22 ++++++++++++++++++++++
drivers/net/ixgbe/ixgbe_main.c | 9 ++++++++-
drivers/net/ixgbe/ixgbe_type.h | 5 +++++
4 files changed, 42 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index 6ac361a..341d8b5 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -204,9 +204,13 @@ struct ixgbe_q_vector {
#define OTHER_VECTOR 1
#define NON_Q_VECTORS (OTHER_VECTOR)
-#define MAX_MSIX_Q_VECTORS 16
+#define MAX_MSIX_VECTORS_82598 18
+#define MAX_MSIX_Q_VECTORS_82598 16
+
+#define MAX_MSIX_Q_VECTORS MAX_MSIX_Q_VECTORS_82598
+#define MAX_MSIX_COUNT MAX_MSIX_VECTORS_82598
+
#define MIN_MSIX_Q_VECTORS 2
-#define MAX_MSIX_COUNT (MAX_MSIX_Q_VECTORS + NON_Q_VECTORS)
#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS)
/* board specific private data structure */
@@ -244,6 +248,7 @@ struct ixgbe_adapter {
u64 hw_csum_rx_good;
u64 non_eop_descs;
int num_msix_vectors;
+ int max_msix_q_vectors; /* true count of q_vectors for device */
struct ixgbe_ring_feature ring_feature[3];
struct msix_entry *msix_entries;
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index dffe7f0..7fb4b86 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -50,6 +50,27 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset,
u8 *eeprom_data);
/**
+ * ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count
+ * @hw: pointer to hardware structure
+ *
+ * Read PCIe configuration space, and get the MSI-X vector count from
+ * the capabilities table.
+ **/
+u16 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw)
+{
+ struct ixgbe_adapter *adapter = hw->back;
+ u16 msix_count;
+ pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82598_CAPS,
+ &msix_count);
+ msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK;
+
+ /* MSI-X count is zero-based in HW, so increment to give proper value */
+ msix_count++;
+
+ return msix_count;
+}
+
+/**
*/
static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
{
@@ -106,6 +127,7 @@ static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw)
mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES;
mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES;
mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES;
+ mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw);
out:
return ret_val;
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index f348176..7171399 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -2421,7 +2421,13 @@ static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter,
ixgbe_set_num_queues(adapter);
} else {
adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */
- adapter->num_msix_vectors = vectors;
+ /*
+ * Adjust for only the vectors we'll use, which is minimum
+ * of max_msix_q_vectors + NON_Q_VECTORS, or the number of
+ * vectors we were allocated.
+ */
+ adapter->num_msix_vectors = min(vectors,
+ adapter->max_msix_q_vectors + NON_Q_VECTORS);
}
}
@@ -2746,6 +2752,7 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
adapter->ring_feature[RING_F_RSS].indices = rss;
adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
adapter->ring_feature[RING_F_DCB].indices = IXGBE_MAX_DCB_INDICES;
+ adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598;
#ifdef CONFIG_IXGBE_DCB
/* Configure DCB traffic classes */
diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h
index 883ff82..0d1d1d2 100644
--- a/drivers/net/ixgbe/ixgbe_type.h
+++ b/drivers/net/ixgbe/ixgbe_type.h
@@ -821,6 +821,10 @@
#define IXGBE_FW_PTR 0x0F
#define IXGBE_PBANUM0_PTR 0x15
#define IXGBE_PBANUM1_PTR 0x16
+#define IXGBE_PCIE_MSIX_82598_CAPS 0x62
+
+/* MSI-X capability fields masks */
+#define IXGBE_PCIE_MSIX_TBL_SZ_MASK 0x7FF
/* Legacy EEPROM word offsets */
#define IXGBE_ISCSI_BOOT_CAPS 0x0033
@@ -1451,6 +1455,7 @@ struct ixgbe_mac_info {
u32 num_rar_entries;
u32 max_tx_queues;
u32 max_rx_queues;
+ u32 max_msix_vectors;
u32 link_attach_type;
u32 link_mode_select;
bool link_settings_loaded;
next prev parent reply other threads:[~2009-01-31 1:06 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-01-31 1:05 [net-next PATCH 1/3] ixgbe: Add 82598 support for BX mezzanine devices Jeff Kirsher
2009-01-31 1:05 ` Jeff Kirsher [this message]
2009-02-01 9:19 ` [net-next PATCH 2/3] ixgbe: Refactor MSI-X allocation mechanism David Miller
2009-01-31 1:06 ` [net-next PATCH 3/3] ixgbe: Update copyright dates, bump the driver version number Jeff Kirsher
2009-02-01 9:19 ` David Miller
2009-02-01 9:19 ` [net-next PATCH 1/3] ixgbe: Add 82598 support for BX mezzanine devices David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090131010556.1820.28773.stgit@lost.foo-projects.org \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=jeff@garzik.org \
--cc=netdev@vger.kernel.org \
--cc=peter.p.waskiewicz.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).