netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, jeff@garzik.org, gospo@redhat.com,
	Alexander Duyck <alexander.h.duyck@intel.com>,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next PATCH 07/26] igb: read address from RAH/RAL instead of from EEPROM
Date: Sat, 07 Feb 2009 01:17:06 -0800	[thread overview]
Message-ID: <20090207091706.15697.11008.stgit@lost.foo-projects.org> (raw)
In-Reply-To: <20090207091504.15697.26667.stgit@lost.foo-projects.org>

From: Alexander Duyck <alexander.h.duyck@intel.com>

Instead of pulling the mac address from EEPROM it is easier to pull it from
the RAL/RAH registers and then just copy it into the address structures.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

 drivers/net/igb/e1000_defines.h |    2 ++
 drivers/net/igb/e1000_nvm.c     |   28 +++++++++++-----------------
 2 files changed, 13 insertions(+), 17 deletions(-)

diff --git a/drivers/net/igb/e1000_defines.h b/drivers/net/igb/e1000_defines.h
index 40d0342..54a1489 100644
--- a/drivers/net/igb/e1000_defines.h
+++ b/drivers/net/igb/e1000_defines.h
@@ -481,6 +481,8 @@
  * manageability enabled, allowing us room for 15 multicast addresses.
  */
 #define E1000_RAH_AV  0x80000000        /* Receive descriptor valid */
+#define E1000_RAL_MAC_ADDR_LEN 4
+#define E1000_RAH_MAC_ADDR_LEN 2
 
 /* Error Codes */
 #define E1000_ERR_NVM      1
diff --git a/drivers/net/igb/e1000_nvm.c b/drivers/net/igb/e1000_nvm.c
index a84e4e4..5942da1 100644
--- a/drivers/net/igb/e1000_nvm.c
+++ b/drivers/net/igb/e1000_nvm.c
@@ -515,29 +515,23 @@ out:
  **/
 s32 igb_read_mac_addr(struct e1000_hw *hw)
 {
-	s32  ret_val = 0;
-	u16 offset, nvm_data, i;
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
 
-	for (i = 0; i < ETH_ALEN; i += 2) {
-		offset = i >> 1;
-		ret_val = hw->nvm.ops.read_nvm(hw, offset, 1, &nvm_data);
-		if (ret_val) {
-			hw_dbg("NVM Read Error\n");
-			goto out;
-		}
-		hw->mac.perm_addr[i] = (u8)(nvm_data & 0xFF);
-		hw->mac.perm_addr[i+1] = (u8)(nvm_data >> 8);
-	}
+	rar_high = rd32(E1000_RAH(0));
+	rar_low = rd32(E1000_RAL(0));
+
+	for (i = 0; i < E1000_RAL_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i] = (u8)(rar_low >> (i*8));
 
-	/* Flip last bit of mac address if we're on second port */
-	if (hw->bus.func == E1000_FUNC_1)
-		hw->mac.perm_addr[5] ^= 1;
+	for (i = 0; i < E1000_RAH_MAC_ADDR_LEN; i++)
+		hw->mac.perm_addr[i+4] = (u8)(rar_high >> (i*8));
 
 	for (i = 0; i < ETH_ALEN; i++)
 		hw->mac.addr[i] = hw->mac.perm_addr[i];
 
-out:
-	return ret_val;
+	return 0;
 }
 
 /**


  parent reply	other threads:[~2009-02-07  9:17 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-02-07  9:15 [net-next PATCH 01/26] igb: optomize/refactor receive path Jeff Kirsher
2009-02-07  9:15 ` [net-next PATCH 02/26] igb: move setting of buffsz out of repeated path in alloc_rx_buffers Jeff Kirsher
2009-02-07  9:15 ` [net-next PATCH 03/26] igb: move initialization of number of queues into set_interrupt_capability Jeff Kirsher
2009-02-07  9:16 ` [net-next PATCH 04/26] igb: remove check for needing an io port Jeff Kirsher
2009-02-07  9:16 ` [net-next PATCH 05/26] igb: add link check function Jeff Kirsher
2009-02-07  9:16 ` [net-next PATCH 06/26] igb: make dev_spec a union and remove dynamic allocation Jeff Kirsher
2009-02-07  9:17 ` Jeff Kirsher [this message]
2009-02-07  9:17 ` [net-next PATCH 08/26] igb: rename phy ops Jeff Kirsher
2009-02-07  9:17 ` [net-next PATCH 09/26] igb: rename nvm ops Jeff Kirsher
2009-02-07  9:18 ` [net-next PATCH 10/26] igb: remove unused rx_hdr_split statistic Jeff Kirsher
2009-02-07  9:18 ` [net-next PATCH 11/26] igb: update feature flags supported in ethtool Jeff Kirsher
2009-02-07  9:18 ` [net-next PATCH 12/26] igb: update testing done by ethtool Jeff Kirsher
2009-02-07  9:19 ` [net-next PATCH 13/26] igb: add counter for dma out of sync errors Jeff Kirsher
2009-02-07  9:19 ` [net-next PATCH 14/26] igb: cleanup igb_netpoll to be more friendly with napi & GRO Jeff Kirsher
2009-02-07  9:19 ` [net-next PATCH 15/26] igb: remove redundant timer updates and cleanup watchdog_task Jeff Kirsher
2009-02-07  9:20 ` [net-next PATCH 16/26] igb: rename igb_update_mc_addr_list_82575 to not include the 82575 Jeff Kirsher
2009-02-07  9:20 ` [net-next PATCH 17/26] igb: remove unnecessary adapter->hw calls when just hw-> will do Jeff Kirsher
2009-02-07  9:20 ` [net-next PATCH 18/26] igb: don't read eicr when responding to legacy interrupts Jeff Kirsher
2009-02-07  9:21 ` [net-next PATCH 19/26] igb: move get_hw_control within igb_resume Jeff Kirsher
2009-02-07  9:21 ` [net-next PATCH 20/26] igb: change pba size determination from if to switch statement Jeff Kirsher
2009-02-07  9:21 ` [net-next PATCH 21/26] igb: remove disable_av variable from mac_info struct Jeff Kirsher
2009-02-07  9:22 ` [net-next PATCH 22/26] igb: remove redundant count set and err_hw_init Jeff Kirsher
2009-02-07  9:22 ` [net-next PATCH 23/26] igb: update stats before doing reset in igb_down Jeff Kirsher
2009-02-07  9:22 ` [net-next PATCH 24/26] igb: fix two minor items found during code review Jeff Kirsher
2009-02-07  9:23 ` [net-next PATCH 25/26] igb: update version number and copyright dates Jeff Kirsher
2009-02-07  9:23 ` [net-next PATCH 26/26] igb: remove dead code in transmit routine Jeff Kirsher
2009-02-07 10:46 ` [net-next PATCH 01/26] igb: optomize/refactor receive path David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090207091706.15697.11008.stgit@lost.foo-projects.org \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=alexander.h.duyck@intel.com \
    --cc=davem@davemloft.net \
    --cc=gospo@redhat.com \
    --cc=jeff@garzik.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).