From: "John W. Linville" <linville@tuxdriver.com>
To: davem@davemloft.net
Cc: linux-wireless@vger.kernel.org, netdev@vger.kernel.org
Subject: pull request: wireless-next-2.6 2009-02-23
Date: Mon, 23 Feb 2009 14:26:59 -0500 [thread overview]
Message-ID: <20090223192659.GB3553@tuxdriver.com> (raw)
Dave,
Here is a big batch of changes intended for 2.6.30. They run the usual
gamut of wireless driver and mac80211 changes...
There is an ugly one from me. It is a kluge but it prevents a crash on
my Lenovo T400. I bisected the crash down to "mac80211: use cfg80211s
BSS infrastructure", which is already in net-next-2.6. Still, if it is
too ugly then let me know and I'll reformulate without it.
Please let me know if there are problems!
Thanks,
John
---
Individual patches are available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6/
---
The following changes since commit ce16c5337ab0d165f95c88aa857207efd7c01139:
Eric W. Biederman (1):
netns: Remove net_alive
are available in the git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6.git master
Bing Zhao (1):
libertas: fix power save issue in libertas_sdio module
Bob Copeland (10):
ath9k: remove write-only current_rd_inuse
ath9k: save a few calls to ath9k_regd_get_eepromRD
ath9k: convert isWwrSKU macro into C code
ath9k: remove ath9k_regd_get_rd()
ath9k: remove prototype for ath9k_regd_get_current_country
ath9k: move common regulatory code out of if() branches
ath5k: don't mask off interrupt bits
ath5k: use spin_lock_irqsave for beacon lock
ath5k: move beacon processing to a tasklet
ath5k: compute rts/cts duration after computing full pktlen
Dan Williams (4):
hostap: convert usage of net/ieee80211.h to linux/ieee80211.h
make net/ieee80211.h private to ipw2x00
cfg80211: age scan results on resume
ipw2x00: age scan results on resume
Helmut Schaa (1):
iwlagn: clean up error path in iwl_pci_probe
Ivo van Doorn (4):
rt2x00: uncomment get_tsf
rt2x00: Remove check for rf word 0
rt2x00: Add various new USB IDs for rt73usb
rt2x00: Fix RF offset
Jiri Slaby (1):
ipw2200, fix ipw io functions
Johannes Berg (10):
mac80211: disallow moving netns
mac80211: fix aggregation for hardware with ampdu queues
mac80211: split IBSS/managed code
genetlink: introduce pre/post methods
nl80211: lock rtnl around all operations
cfg80211/mac80211: fill qual.qual value/adjust max_qual.qual
mac80211: add missing kernel-doc
nl80211: remove admin requirement from station get
cfg80211: clean up signal type
mac80211/cfg80211: move iwrange handler to cfg80211
John W. Linville (2):
airo: correct improper initialization of local variable
iwlagn: default to MAX_UCODE_BEACON_INTERVAL in iwl_adjust_beacon_interval
Jouni Malinen (2):
nl80211: Optional IEs into scan request
nl80211: Provide access to STA TX/RX packet counters
Randy Dunlap (1):
wireless: fix for CONFIG_NL80211=n
Reinette Chatre (2):
iwlwifi: use singlethread workqueue
iwlwifi: Fix and rework Kconfig file
Roel Kluin (3):
wavelan: Test arraysize before an element of the array.
p54: misplaced parentheses
b43: Fix LO calibration txctl reg value
Senthil Balasubramanian (1):
ath9k: Add open loop control support
Sujith (16):
ath9k: Store the correct max TX power level
ath9k: Fix rd_ext EEPROM capability for AR9285
ath9k: Enable Fractional N mode
ath9k: Enable TSF Out of Range Interrupt
ath9k: Initialize AGC calibration properly
ath9k: Fix bug in disabling MIB counters
ath9k: Fix incorrect noise floor reading for 4k EEPROM
ath9k: Decrease minimum NF threshold
mac80211: Extend the rate control API with an update callback
ath9k: Program the RTC registers correctly
ath9k: Fix HW wait timeout
ath9k: Fix antenna assignment bug in TX status processing
ath9k: Initialize channel change time
ath9k: Remove a few unused capability macros
ath9k: Remove ath_txq_depth and get the queue depth directly
ath9k: Use beacon interval directly
Vasanthakumar Thiagarajan (2):
mac80211: Make sure non-HT connection when IEEE80211_STA_TKIP_WEP_USED is set
ath9k: Fix PTK/GTK handshake timeout
Wu, Fengguang (1):
iwlwifi: report correct and detailed values about requested txpower
drivers/net/wireless/airo.c | 3 +-
drivers/net/wireless/ath5k/base.c | 84 +-
drivers/net/wireless/ath5k/base.h | 1 +
drivers/net/wireless/ath9k/ani.c | 7 +-
drivers/net/wireless/ath9k/beacon.c | 3 +
drivers/net/wireless/ath9k/calib.c | 66 +-
drivers/net/wireless/ath9k/calib.h | 2 +-
drivers/net/wireless/ath9k/eeprom.c | 234 +++-
drivers/net/wireless/ath9k/eeprom.h | 34 +-
drivers/net/wireless/ath9k/hw.c | 106 +-
drivers/net/wireless/ath9k/hw.h | 20 +-
drivers/net/wireless/ath9k/mac.c | 30 +-
drivers/net/wireless/ath9k/main.c | 36 +-
drivers/net/wireless/ath9k/pci.c | 3 +-
drivers/net/wireless/ath9k/phy.c | 19 +-
drivers/net/wireless/ath9k/phy.h | 29 +
drivers/net/wireless/ath9k/rc.c | 7 +-
drivers/net/wireless/ath9k/recv.c | 1 -
drivers/net/wireless/ath9k/reg.h | 12 +-
drivers/net/wireless/ath9k/regd.c | 28 +-
drivers/net/wireless/ath9k/regd.h | 9 -
drivers/net/wireless/ath9k/xmit.c | 28 +-
drivers/net/wireless/b43/lo.c | 2 +-
drivers/net/wireless/hostap/hostap.h | 2 +-
drivers/net/wireless/hostap/hostap_80211.h | 2 +-
drivers/net/wireless/hostap/hostap_80211_rx.c | 88 +-
drivers/net/wireless/hostap/hostap_80211_tx.c | 51 +-
drivers/net/wireless/hostap/hostap_ap.c | 138 +-
drivers/net/wireless/hostap/hostap_ap.h | 6 +-
drivers/net/wireless/hostap/hostap_hw.c | 24 +-
drivers/net/wireless/hostap/hostap_info.c | 1 +
drivers/net/wireless/hostap/hostap_ioctl.c | 1 +
drivers/net/wireless/hostap/hostap_main.c | 38 +-
drivers/net/wireless/ipw2x00/Kconfig | 2 +-
.../net/wireless/ipw2x00}/ieee80211.h | 3 +
drivers/net/wireless/ipw2x00/ipw2100.c | 12 +-
drivers/net/wireless/ipw2x00/ipw2100.h | 8 +-
drivers/net/wireless/ipw2x00/ipw2200.c | 116 +-
drivers/net/wireless/ipw2x00/ipw2200.h | 7 +-
drivers/net/wireless/ipw2x00/libipw_geo.c | 2 +-
drivers/net/wireless/ipw2x00/libipw_module.c | 17 +-
drivers/net/wireless/ipw2x00/libipw_rx.c | 5 +-
drivers/net/wireless/ipw2x00/libipw_tx.c | 2 +-
drivers/net/wireless/ipw2x00/libipw_wx.c | 27 +-
drivers/net/wireless/iwlwifi/Kconfig | 56 +-
drivers/net/wireless/iwlwifi/Makefile | 4 +-
drivers/net/wireless/iwlwifi/iwl-agn.c | 13 +-
drivers/net/wireless/iwlwifi/iwl-core.c | 10 +-
drivers/net/wireless/iwlwifi/iwl-core.h | 2 +-
drivers/net/wireless/iwlwifi/iwl-dev.h | 4 +-
drivers/net/wireless/iwlwifi/iwl3945-base.c | 2 +-
drivers/net/wireless/libertas/defs.h | 1 +
drivers/net/wireless/libertas/if_sdio.c | 6 +
drivers/net/wireless/p54/p54common.c | 4 +-
drivers/net/wireless/rt2x00/rt2400pci.c | 3 -
drivers/net/wireless/rt2x00/rt2400pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500pci.c | 3 -
drivers/net/wireless/rt2x00/rt2500pci.h | 4 +-
drivers/net/wireless/rt2x00/rt2500usb.c | 3 -
drivers/net/wireless/rt2x00/rt2500usb.h | 4 +-
drivers/net/wireless/rt2x00/rt2x00debug.c | 10 +-
drivers/net/wireless/rt2x00/rt61pci.c | 3 -
drivers/net/wireless/rt2x00/rt61pci.h | 4 +-
drivers/net/wireless/rt2x00/rt73usb.c | 19 +-
drivers/net/wireless/rt2x00/rt73usb.h | 4 +-
drivers/net/wireless/wavelan.c | 3 +-
include/linux/nl80211.h | 5 +
include/net/cfg80211.h | 23 +-
include/net/genetlink.h | 47 +-
include/net/mac80211.h | 18 +-
include/net/wireless.h | 3 +
net/mac80211/Makefile | 1 +
net/mac80211/agg-rx.c | 6 +-
net/mac80211/agg-tx.c | 191 ++-
net/mac80211/cfg.c | 49 +-
net/mac80211/debugfs_netdev.c | 48 +-
net/mac80211/ht.c | 19 +-
net/mac80211/ibss.c | 888 +++++++++++
net/mac80211/ieee80211_i.h | 138 ++-
net/mac80211/iface.c | 77 +-
net/mac80211/key.c | 2 +-
net/mac80211/main.c | 24 +-
net/mac80211/mlme.c | 1648 +++++---------------
net/mac80211/rate.h | 12 +
net/mac80211/rx.c | 37 +-
net/mac80211/scan.c | 57 +-
net/mac80211/spectmgmt.c | 26 +-
net/mac80211/sta_info.c | 15 +-
net/mac80211/sta_info.h | 5 +-
net/mac80211/tx.c | 29 +-
net/mac80211/util.c | 254 +++-
net/mac80211/wext.c | 262 ++--
net/mac80211/wme.c | 161 +--
net/mac80211/wme.h | 6 -
net/netlink/genetlink.c | 19 +-
net/wireless/core.h | 3 +
net/wireless/nl80211.c | 124 +-
net/wireless/nl80211.h | 4 +
net/wireless/scan.c | 61 +-
net/wireless/sysfs.c | 7 +
net/wireless/wext-compat.c | 97 ++
101 files changed, 3315 insertions(+), 2533 deletions(-)
rename {include/net => drivers/net/wireless/ipw2x00}/ieee80211.h (99%)
create mode 100644 net/mac80211/ibss.c
Omnibus patch is available here:
http://www.kernel.org/pub/linux/kernel/people/linville/wireless-next-2.6-2009-02-23.patch.bz2
--
John W. Linville Someday the world will need a hero, and you
linville@tuxdriver.com might be all we have. Be ready.
next reply other threads:[~2009-02-23 19:30 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-02-23 19:26 John W. Linville [this message]
[not found] ` <20090223192659.GB3553-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2009-02-24 6:31 ` pull request: wireless-next-2.6 2009-02-23 Johannes Berg
2009-02-25 7:55 ` David Miller
[not found] ` <20090224.235510.30497146.davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
2009-02-26 8:36 ` Johannes Berg
[not found] ` <1235637360.29050.16.camel-YfaajirXv2244ywRPIzf9A@public.gmane.org>
2009-02-26 16:13 ` John W. Linville
[not found] ` <20090226161340.GA4430-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org>
2009-02-26 16:47 ` Johannes Berg
2009-02-27 1:37 ` Johannes Berg
[not found] ` <1235698640.4936.6.camel-YfaajirXv2244ywRPIzf9A@public.gmane.org>
2009-02-27 3:18 ` Luis R. Rodriguez
2009-03-11 11:49 ` Johannes Berg
[not found] ` <1236772199.20266.3.camel-YfaajirXv2244ywRPIzf9A@public.gmane.org>
2009-03-11 16:27 ` Luis R. Rodriguez
2009-02-27 20:40 ` John W. Linville
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090223192659.GB3553@tuxdriver.com \
--to=linville@tuxdriver.com \
--cc=davem@davemloft.net \
--cc=linux-wireless@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).