netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yi Zou <yi.zou@intel.com>
To: netdev@vger.kernel.org, linux-scsi@vger.kernel.org
Cc: yi.zou@intel.com
Subject: [PATCH 06/11] fcoe, libfc: check offload features from LLD through netdev
Date: Fri, 27 Feb 2009 14:07:04 -0800	[thread overview]
Message-ID: <20090227220704.4987.98233.stgit.yi.zou@intel.com> (raw)
In-Reply-To: <20090227220034.4987.50755.stgit@localhost.localdomain>

This checks if net_devices supports FCoE offload ops in netdev_ops and it
if it does, then sets up the corresponding flags in the associated fc_lport.

For large send offload, the maximum length supported in one large send is now
described by the added lso_max in fc_lport, which is setup initially from
netdev->gso_max_size.

Signed-off-by: Yi Zou <yi.zou@intel.com>
---

 drivers/scsi/fcoe/fcoe_sw.c |   29 ++++++++++++++++++++++++++++-
 include/scsi/libfc.h        |    1 +
 2 files changed, 29 insertions(+), 1 deletions(-)

diff --git a/drivers/scsi/fcoe/fcoe_sw.c b/drivers/scsi/fcoe/fcoe_sw.c
index da210eb..d99217d 100644
--- a/drivers/scsi/fcoe/fcoe_sw.c
+++ b/drivers/scsi/fcoe/fcoe_sw.c
@@ -133,6 +133,13 @@ static int fcoe_sw_lport_config(struct fc_lport *lp)
 	/* lport fc_lport related configuration */
 	fc_lport_config(lp);
 
+	/* offload related configuration */
+	lp->crc_offload = 0;
+	lp->seq_offload = 0;
+	lp->lro_enabled = 0;
+	lp->lro_xid = 0;
+	lp->lso_max = 0;
+
 	return 0;
 }
 
@@ -186,7 +193,27 @@ static int fcoe_sw_netdev_config(struct fc_lport *lp, struct net_device *netdev)
 	if (fc->real_dev->features & NETIF_F_SG)
 		lp->sg_supp = 1;
 
-
+#ifdef NETIF_F_FCOE_CRC
+	if (netdev->features & NETIF_F_FCOE_CRC) {
+		lp->crc_offload = 1;
+		printk(KERN_DEBUG "fcoe:%s supports FCCRC offload\n",
+		       netdev->name);
+	}
+#endif
+#ifdef NETIF_F_FSO
+	if (netdev->features & NETIF_F_FSO) {
+		lp->seq_offload = 1;
+		lp->lso_max = netdev->gso_max_size;
+		printk(KERN_DEBUG "fcoe:%s supports LSO for max len 0x%x\n",
+		       netdev->name, lp->lso_max);
+	}
+#endif
+	if (netdev->fcoe_ddp_xid) {
+		lp->lro_enabled = 1;
+		lp->lro_xid = netdev->fcoe_ddp_xid;
+		printk(KERN_DEBUG "fcoe:%s supports LRO for max xid 0x%x\n",
+		       netdev->name, lp->lro_xid);
+	}
 	skb_queue_head_init(&fc->fcoe_pending_queue);
 	fc->fcoe_pending_queue_active = 0;
 
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index a2e126b..61c746c 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -654,6 +654,7 @@ struct fc_lport {
 	u16			link_speed;
 	u16			link_supported_speeds;
 	u16			lro_xid;	/* max xid for fcoe lro */
+	unsigned int		lso_max;	/* max large send size */
 	struct fc_ns_fts	fcts;	        /* FC-4 type masks */
 	struct fc_els_rnid_gen	rnid_gen;	/* RNID information */
 


  parent reply	other threads:[~2009-02-27 23:14 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20090227220034.4987.50755.stgit@localhost.localdomain>
2009-02-27 22:06 ` [PATCH 01/11] net, fcoe: add ETH_P_FCOE for Fibre Channel over Ethernet (FCoE) Yi Zou
2009-02-27 22:06 ` [PATCH 02/11] net: reclaim 8 upper bits of the netdev->features from GSO Yi Zou
2009-02-27 22:06 ` [PATCH 03/11] net: define feature flags for FCoE offloads Yi Zou
2009-02-27 22:06 ` [PATCH 04/11] net: add NETIF_F_FCOE_CRC to can_checksum_protocol Yi Zou
2009-02-27 22:06 ` [PATCH 05/11] net: add FCoE offload support through net_device Yi Zou
2009-02-27 22:07 ` Yi Zou [this message]
2009-02-27 22:07 ` [PATCH 07/11] libfc: use lso_max for sequence offload Yi Zou
2009-02-27 22:07 ` [PATCH 08/11] fcoe: add support to large send by gso through net_device for fcoe_sw Yi Zou
2009-02-27 22:07 ` [PATCH 09/11] libfc: add support of large receive offload by ddp in fc_fcp Yi Zou
2009-02-27 22:07 ` [PATCH 10/11] fcoe: add support to FCoE offload support in fcoe_sw through net_device Yi Zou
2009-02-27 22:07 ` [PATCH 11/11] fcoe: fcoe fc crc offload indication by skb->ip_summed Yi Zou

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090227220704.4987.98233.stgit.yi.zou@intel.com \
    --to=yi.zou@intel.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).