netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Christian <cjs@dhp.com>
To: netdev@vger.kernel.org
Subject: skb_over_panic kernel panic
Date: Tue, 10 Mar 2009 21:10:13 -0400	[thread overview]
Message-ID: <20090311011013.GC7022@dhp.com> (raw)

Hello,

I keep getting kernel panics on my system with output similar to this:

skb_over_panic: text:fffffffff80456cc4 len:2580 put:2580
head:ffff9900bf18a000 data:ffff8800bf18a010 tail:0xa end:0x640 dev:eth0
--------[ cut here ] ----------
kernel BUG at net/core/skbuff.c:124!xt:ffffffff80456cc4 len:2580
put:2580 head:ffff8800bf18a000 data:ffff8800bf18a010 tail:0xa 
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/devices/pci0000:00/0000:00:1f.0/resource
CPU 5
Modules linked in nvidia(P)
Pid: 0, comm: swapper Tainted: P        2.6.28.7 #3
RIP: 0010:[<ffffffff80531630>] [<ffffffff80531630>] skb_put+0x7a/0x89
RSP: 0018:ffff8801bf9b3dd0 EFLAGS: 00010282

(I copied this output by hand so there may be a typo or two) 

Linux server1 2.6.28.7 #3 SMP Mon Mar 9 20:04:12 EDT 2009 x86_64
Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz GenuineIntel GNU/Linux

Before this my kernel was 2.6.27.5 and I was still getting the same
panics.

eth0: RTL8168c/8111c at 0xffffc20000042000, 00:23:54:ed:7f:a6, XID
3c4000c0 IRQ 18
r8169: eth0: link up

00:00.0 Host bridge: Intel Corporation QuickPath Architecture I/O Hub to
ESI Port (rev 12)
00:01.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 1 (rev 12)
00:03.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 3 (rev 12)
00:07.0 PCI bridge: Intel Corporation QuickPath Architecture I/O Hub PCI
Express Root Port 7 (rev 12)
00:10.0 PIC: Intel Corporation QuickPath Interconnect Physical and Link
Layer Registers Port 0 (rev 12)
00:10.1 PIC: Intel Corporation QuickPath Interconnect Routing and
Protocol Layer Registers Port 0 (rev 12)
00:13.0 PIC: Intel Corporation QuickPath Architecture I/O Hub I/OxAPIC
Interrupt Controller (rev 12)
00:14.0 PIC: Intel Corporation QuickPath Architecture I/O Hub System
Management Registers (rev 12)
00:14.1 PIC: Intel Corporation QuickPath Architecture I/O Hub GPIO and
Scratch Pad Registers (rev 12)
00:14.2 PIC: Intel Corporation QuickPath Architecture I/O Hub Control
Status and RAS Registers (rev 12)
00:14.3 PIC: Intel Corporation QuickPath Architecture I/O Hub Throttle
Registers (rev 12)
00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #4
00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #5
00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #6
00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #2
00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio
Controller
00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 1
00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 3
00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 4
00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express
Port 5
00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #1
00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #2
00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB
UHCI Controller #3
00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2
EHCI Controller #1
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90)
00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface
Controller
00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port
SATA IDE Controller
00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port
SATA IDE Controller
02:00.0 VGA compatible controller: nVidia Corporation G72 [GeForce 7300
LE] (rev a1)
04:00.0 SATA controller: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 03)
04:00.1 IDE interface: JMicron Technologies, Inc. JMicron 20360/20363
AHCI Controller (rev 03)
05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. Device 3403
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
08:00.0 SCSI storage controller: Marvell Technology Group Ltd.
MV88SX6081 8-port SATA II PCI-X Controller (rev 09)
08:01.0 Mass storage controller: Promise Technology, Inc. PDC40718 (SATA
300 TX4) (rev 02)

# lsmod
Module                  Size  Used by
nvidia               7797560  0 



             reply	other threads:[~2009-03-11  2:46 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-03-11  1:10 Christian [this message]
2009-03-11  3:07 ` skb_over_panic kernel panic Christian
2009-03-13 21:22 ` Francois Romieu
2009-03-13 21:36   ` Christian

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090311011013.GC7022@dhp.com \
    --to=cjs@dhp.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).