From: Andrew Morton <akpm@linux-foundation.org>
To: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: bugme-daemon@bugzilla.kernel.org, netdev@vger.kernel.org,
tomimo@ncircle.nullnet.fi,
Stephen Hemminger <shemminger@linux-foundation.org>
Subject: Re: [Bugme-new] [Bug 12886] New: skge wake on lan
Date: Mon, 16 Mar 2009 20:04:28 -0700 [thread overview]
Message-ID: <20090316200428.908245dc.akpm@linux-foundation.org> (raw)
In-Reply-To: <bug-12886-10286@http.bugzilla.kernel.org/>
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Mon, 16 Mar 2009 14:49:44 -0700 (PDT) bugme-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=12886
>
> Summary: skge wake on lan
> Product: Drivers
> Version: 2.5
> KernelVersion: 2.6.28.7
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Network
> AssignedTo: drivers_network@kernel-bugs.osdl.org
> ReportedBy: tomimo@ncircle.nullnet.fi
>
>
> Latest working kernel version: -
> Earliest failing kernel version: commit
> 5177b3240a6608fc0c9c05cc32f4855c6540f8d5
That's
commit 5177b3240a6608fc0c9c05cc32f4855c6540f8d5
Author: Rafael J. Wysocki <rjw@sisk.pl>
AuthorDate: Wed Oct 29 14:22:14 2008 -0700
Commit: Jeff Garzik <jgarzik@redhat.com>
CommitDate: Fri Oct 31 00:52:17 2008 -0400
skge: adapt skge to use reworked PCI PM
Adapt the skge driver to the reworked PCI PM
* Use device_set_wakeup_enable() and friends as needed
* Remove an open-coded reference to the standard PCI PM registers
* Use pci_prepare_to_sleep() and pci_back_from_sleep() in the
->suspend() and ->resume() callbacks
* Use the observation that it is sufficient to call pci_enable_wake()
once, unless it fails
Tested on Asus L5D (Yukon-Lite rev 7).
> Distribution: Fedora (with standard mainline kernel)
> Hardware Environment: Asus A7V880-motherboard
> Software Environment: Fedora 9
> Problem Description: The skge-drivers commit from last october seems to have
> broken the wake-on-lan feature from my machine. Reverting the above mentioned
> commit fixes the problem again ie. WOL is working again without problems.
> The broken patch did not produce any errors or such, only symptom was that WOL
> did not work anymore. The loading of the nvidia module did not change the
> situation at all (for the record).
>
> valen#root>lspci -vv
> 00:00.0 Host bridge: VIA Technologies, Inc. KT880 Host Bridge (rev 80)
> Subsystem: ASUSTeK Computer Inc. Unknown device 8122
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ >SERR- <PERR- INTx-
> Latency: 96
> Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
> Capabilities: [80] AGP version 3.5
> Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans-
> 64bit- FW+ AGP3+ Rate=x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
> Rate=<none>
> Capabilities: [50] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:00.1 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
> Subsystem: ASUSTeK Computer Inc. Unknown device 8122
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.2 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
> Subsystem: ASUSTeK Computer Inc. Unknown device 8122
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.3 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
> Subsystem: ASUSTeK Computer Inc. Unknown device 8122
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.4 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
> Subsystem: ASUSTeK Computer Inc. Unknown device 8122
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:00.7 Host bridge: VIA Technologies, Inc. KT880 Host Bridge
> Subsystem: ASUSTeK Computer Inc. Unknown device 8122
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge (prog-if 00
> [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> Memory behind bridge: fc100000-fe2fffff
> Prefetchable memory behind bridge: 9ff00000-afefffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort+ <SERR- <PERR+
> BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [70] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 00:09.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit
> Ethernet Controller (rev 13)
> Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet
> Controller (Asus)
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR+ FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 96 (5750ns min, 7750ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 18
> Region 0: Memory at fe400000 (32-bit, non-prefetchable) [size=16K]
> Region 1: I/O ports at e000 [size=256]
> Expansion ROM at fe300000 [disabled] [size=128K]
> Capabilities: [48] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=1 PME-
> Capabilities: [50] Vital Product Data <?>
> Kernel driver in use: skge
>
> 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID
> Controller (rev 80)
> Subsystem: ASUSTeK Computer Inc. A7V600/K8V Deluxe/K8V-X/A8V Deluxe
> motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 96
> Interrupt: pin B routed to IRQ 20
> Region 0: I/O ports at eff0 [size=8]
> Region 1: I/O ports at efe4 [size=4]
> Region 2: I/O ports at efa8 [size=8]
> Region 3: I/O ports at efe0 [size=4]
> Region 4: I/O ports at ef90 [size=16]
> Region 5: I/O ports at e800 [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: sata_via
>
> 00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a
> [Master SecP PriP])
> Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32
> Interrupt: pin A routed to IRQ 20
> Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
> [size=8]
> Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
> [size=1]
> Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
> [size=8]
> Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
> [size=1]
> Region 4: I/O ports at fc00 [size=16]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: pata_via
>
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 96, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 21
> Region 4: I/O ports at eec0 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 96, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 21
> Region 4: I/O ports at ef00 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 96, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 21
> Region 4: I/O ports at ef20 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81) (prog-if 00 [UHCI])
> Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 96, Cache Line Size: 32 bytes
> Interrupt: pin B routed to IRQ 21
> Region 4: I/O ports at ef40 [size=32]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: uhci_hcd
> Kernel modules: uhci-hcd
>
> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20
> [EHCI])
> Subsystem: VIA Technologies, Inc. USB 2.0
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 96, Cache Line Size: 64 bytes
> Interrupt: pin C routed to IRQ 21
> Region 0: Memory at fe900000 (32-bit, non-prefetchable) [size=256]
> Capabilities: [80] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
> PME(D0+,D1+,D2+,D3hot+,D3cold+)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: ehci_hcd
> Kernel modules: ehci-hcd
>
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
> [KT600/K8T800/K8T890 South]
> Subsystem: ASUSTeK Computer Inc. A7V600/K8V-X/A8V Deluxe motherboard
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel modules: i2c-viapro
>
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237
> AC97 Audio Controller (rev 60)
> Subsystem: ASUSTeK Computer Inc. Asus P5VD1-X (AD1888 codec [SoundMax])
> Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 22
> Region 0: I/O ports at e400 [size=256]
> Capabilities: [c0] Power Management version 2
> Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Kernel driver in use: VIA 82xx Audio
> Kernel modules: snd-via82xx
>
> 00:11.6 Communication controller: VIA Technologies, Inc. AC'97 Modem Controller
> (rev 80)
> Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Interrupt: pin C routed to IRQ 0
> Region 0: I/O ports at 1000 [disabled] [size=256]
> Capabilities: [d0] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
> 01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200]
> (rev a1) (prog-if 00 [VGA controller])
> Subsystem: XFX Pine Group Inc. Unknown device 1280
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 248 (1250ns min, 250ns max)
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> Region 1: Memory at a0000000 (32-bit, prefetchable) [size=128M]
> [virtual] Expansion ROM at fe200000 [disabled] [size=128K]
> Capabilities: [60] Power Management version 2
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
> PME(D0-,D1-,D2-,D3hot-,D3cold-)
> Status: D0 PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [44] AGP version 3.0
> Status: RQ=32 Iso- ArqSz=0 Cal=3 SBA+ ITACoh- GART64- HTrans-
> 64bit- FW+ AGP3+ Rate=x4,x8
> Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW-
> Rate=<none>
> Kernel driver in use: nvidia
> Kernel modules: nvidia
>
>
next parent reply other threads:[~2009-03-17 3:10 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <bug-12886-10286@http.bugzilla.kernel.org/>
2009-03-17 3:04 ` Andrew Morton [this message]
2009-03-17 10:01 ` [Bugme-new] [Bug 12886] New: skge wake on lan Rafael J. Wysocki
2009-03-17 10:15 ` Tomi Orava
2009-03-17 21:23 ` Rafael J. Wysocki
2009-03-18 7:32 ` Tomi Orava
2009-03-18 15:14 ` Rafael J. Wysocki
2009-03-19 13:03 ` Tomi Orava
2009-03-19 16:23 ` Tomi Orava
2009-03-19 20:59 ` Rafael J. Wysocki
2009-03-20 3:59 ` Tomi Orava
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090316200428.908245dc.akpm@linux-foundation.org \
--to=akpm@linux-foundation.org \
--cc=bugme-daemon@bugzilla.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=rjw@sisk.pl \
--cc=shemminger@linux-foundation.org \
--cc=tomimo@ncircle.nullnet.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).