From: Stephen Hemminger <shemminger@vyatta.com>
To: Stephen Hemminger <shemminger@vyatta.com>
Cc: Patrick McHardy <kaber@trash.net>,
David Miller <davem@davemloft.net>,
netdev@vger.kernel.org
Subject: Re: [PATCH] netdev: handle setting transmit queue length on active device.
Date: Wed, 18 Mar 2009 11:20:38 -0700 [thread overview]
Message-ID: <20090318112038.59b689f8@nehalam> (raw)
In-Reply-To: <20090318110236.7fd09d09@nehalam>
Some virtual devices like VLAN's or bridges by default have not transmit queue.
In order to do queuing disciplines on these devices a queue must be added
by setting transmit queue length. The kernel allows doing this at any time, but
setting the queue length value is not enough. Setting the queue length does
not create the transmit queue (going from 0 to non-zero) or destroy it
(setting to zero); the queue is only created (or destroyed) when device
comes up (or goes down).
This patch handles this be doing the necessary activations.
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
---
include/linux/netdevice.h | 2 ++
net/core/dev.c | 19 +++++++++++++++++--
net/core/net-sysfs.c | 5 ++---
net/core/rtnetlink.c | 2 +-
4 files changed, 22 insertions(+), 6 deletions(-)
--- a/include/linux/netdevice.h 2009-03-17 11:06:40.358479573 -0700
+++ b/include/linux/netdevice.h 2009-03-17 11:13:55.243604979 -0700
@@ -1436,6 +1436,8 @@ extern int dev_change_net_namespace(str
extern int dev_set_mtu(struct net_device *, int);
extern int dev_set_mac_address(struct net_device *,
struct sockaddr *);
+extern int dev_set_tx_queue_len(struct net_device *dev,
+ unsigned long len);
extern int dev_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev,
struct netdev_queue *txq);
--- a/net/core/dev.c 2009-03-17 11:05:54.919541341 -0700
+++ b/net/core/dev.c 2009-03-18 11:11:12.678298789 -0700
@@ -983,6 +983,30 @@ int dev_set_alias(struct net_device *dev
return len;
}
+/**
+ *
+ * @dev: device
+ * @len: limit of frames in transmit queue
+ *
+ * Set transmit queue length for device.
+ * If queue length is set to 0, then queueing is disabled.
+ */
+int dev_set_tx_queue_len(struct net_device *dev, unsigned long len)
+{
+ if (len == dev->tx_queue_len)
+ return 0;
+
+ if ((dev->tx_queue_len != 0) && (len != 0))
+ dev->tx_queue_len = len;
+ else {
+ if (dev->flags & IFF_UP)
+ dev_deactivate(dev);
+ dev->tx_queue_len = len;
+ if (dev->flags & IFF_UP)
+ dev_activate(dev);
+ }
+ return 0;
+}
/**
* netdev_features_change - device changes features
@@ -3975,8 +3999,7 @@ static int dev_ifsioc(struct net *net, s
case SIOCSIFTXQLEN:
if (ifr->ifr_qlen < 0)
return -EINVAL;
- dev->tx_queue_len = ifr->ifr_qlen;
- return 0;
+ return dev_set_tx_queue_len(dev, ifr->ifr_qlen);
case SIOCSIFNAME:
ifr->ifr_newname[IFNAMSIZ-1] = '\0';
--- a/net/core/net-sysfs.c 2009-03-17 11:05:54.896453584 -0700
+++ b/net/core/net-sysfs.c 2009-03-17 11:10:10.877230558 -0700
@@ -198,10 +198,9 @@ static ssize_t store_flags(struct device
NETDEVICE_SHOW(tx_queue_len, fmt_ulong);
-static int change_tx_queue_len(struct net_device *net, unsigned long new_len)
+static int change_tx_queue_len(struct net_device *netdev, unsigned long new_len)
{
- net->tx_queue_len = new_len;
- return 0;
+ return dev_set_tx_queue_len(netdev, new_len);
}
static ssize_t store_tx_queue_len(struct device *dev,
--- a/net/core/rtnetlink.c 2009-03-17 11:10:47.540541648 -0700
+++ b/net/core/rtnetlink.c 2009-03-17 11:11:28.722542409 -0700
@@ -885,7 +885,7 @@ static int do_setlink(struct net_device
}
if (tb[IFLA_TXQLEN])
- dev->tx_queue_len = nla_get_u32(tb[IFLA_TXQLEN]);
+ dev_set_tx_queue_len(dev, nla_get_u32(tb[IFLA_TXQLEN]));
if (tb[IFLA_OPERSTATE])
set_operstate(dev, nla_get_u8(tb[IFLA_OPERSTATE]));
next prev parent reply other threads:[~2009-03-18 18:20 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-03-18 17:02 [PATCH] netdev: handle setting transmit queue length on active device Stephen Hemminger
2009-03-18 17:15 ` Patrick McHardy
2009-03-18 18:02 ` Stephen Hemminger
2009-03-18 18:08 ` Patrick McHardy
2009-03-18 18:16 ` Stephen Hemminger
2009-03-18 18:31 ` Patrick McHardy
2009-03-18 18:20 ` Stephen Hemminger [this message]
2009-03-18 17:18 ` Eric Dumazet
2009-03-18 18:00 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090318112038.59b689f8@nehalam \
--to=shemminger@vyatta.com \
--cc=davem@davemloft.net \
--cc=kaber@trash.net \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).