From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
Alexander Duyck <alexander.h.duyck@intel.com>,
Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [PATCH 6/9] ixgbe: refactor tx buffer processing to use skb_dma_map/unmap
Date: Wed, 01 Apr 2009 00:34:23 -0700 [thread overview]
Message-ID: <20090401073423.3749.21206.stgit@lost.foo-projects.org> (raw)
In-Reply-To: <20090401073241.3749.36391.stgit@lost.foo-projects.org>
From: Alexander Duyck <alexander.h.duyck@intel.com>
This patch resolves an issue with map single being used to map a buffer and
then unmap page being used to unmap it. In addition it handles any error
conditions that may be detected using skb_dma_map.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Acked-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_main.c | 79 +++++++++++++++++++++-------------------
1 files changed, 41 insertions(+), 38 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 63c0f19..f36cff5 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -187,15 +187,14 @@ static void ixgbe_unmap_and_free_tx_resource(struct ixgbe_adapter *adapter,
struct ixgbe_tx_buffer
*tx_buffer_info)
{
- if (tx_buffer_info->dma) {
- pci_unmap_page(adapter->pdev, tx_buffer_info->dma,
- tx_buffer_info->length, PCI_DMA_TODEVICE);
- tx_buffer_info->dma = 0;
- }
+ tx_buffer_info->dma = 0;
if (tx_buffer_info->skb) {
+ skb_dma_unmap(&adapter->pdev->dev, tx_buffer_info->skb,
+ DMA_TO_DEVICE);
dev_kfree_skb_any(tx_buffer_info->skb);
tx_buffer_info->skb = NULL;
}
+ tx_buffer_info->time_stamp = 0;
/* tx_buffer_info must be completely set up in the transmit path */
}
@@ -204,15 +203,11 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
unsigned int eop)
{
struct ixgbe_hw *hw = &adapter->hw;
- u32 head, tail;
/* Detect a transmit hang in hardware, this serializes the
* check with the clearing of time_stamp and movement of eop */
- head = IXGBE_READ_REG(hw, tx_ring->head);
- tail = IXGBE_READ_REG(hw, tx_ring->tail);
adapter->detect_tx_hung = false;
- if ((head != tail) &&
- tx_ring->tx_buffer_info[eop].time_stamp &&
+ if (tx_ring->tx_buffer_info[eop].time_stamp &&
time_after(jiffies, tx_ring->tx_buffer_info[eop].time_stamp + HZ) &&
!(IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF)) {
/* detected Tx unit hang */
@@ -227,7 +222,8 @@ static inline bool ixgbe_check_tx_hang(struct ixgbe_adapter *adapter,
" time_stamp <%lx>\n"
" jiffies <%lx>\n",
tx_ring->queue_index,
- head, tail,
+ IXGBE_READ_REG(hw, tx_ring->head),
+ IXGBE_READ_REG(hw, tx_ring->tail),
tx_ring->next_to_use, eop,
tx_ring->tx_buffer_info[eop].time_stamp, jiffies);
return true;
@@ -4164,32 +4160,39 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
struct sk_buff *skb, unsigned int first)
{
struct ixgbe_tx_buffer *tx_buffer_info;
- unsigned int len = skb->len;
+ unsigned int len = skb_headlen(skb);
unsigned int offset = 0, size, count = 0, i;
unsigned int nr_frags = skb_shinfo(skb)->nr_frags;
unsigned int f;
-
- len -= skb->data_len;
+ dma_addr_t *map;
i = tx_ring->next_to_use;
+ if (skb_dma_map(&adapter->pdev->dev, skb, DMA_TO_DEVICE)) {
+ dev_err(&adapter->pdev->dev, "TX DMA map failed\n");
+ return 0;
+ }
+
+ map = skb_shinfo(skb)->dma_maps;
+
while (len) {
tx_buffer_info = &tx_ring->tx_buffer_info[i];
size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
tx_buffer_info->length = size;
- tx_buffer_info->dma = pci_map_single(adapter->pdev,
- skb->data + offset,
- size, PCI_DMA_TODEVICE);
+ tx_buffer_info->dma = map[0] + offset;
tx_buffer_info->time_stamp = jiffies;
tx_buffer_info->next_to_watch = i;
len -= size;
offset += size;
count++;
- i++;
- if (i == tx_ring->count)
- i = 0;
+
+ if (len) {
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+ }
}
for (f = 0; f < nr_frags; f++) {
@@ -4197,33 +4200,27 @@ static int ixgbe_tx_map(struct ixgbe_adapter *adapter,
frag = &skb_shinfo(skb)->frags[f];
len = frag->size;
- offset = frag->page_offset;
+ offset = 0;
while (len) {
+ i++;
+ if (i == tx_ring->count)
+ i = 0;
+
tx_buffer_info = &tx_ring->tx_buffer_info[i];
size = min(len, (uint)IXGBE_MAX_DATA_PER_TXD);
tx_buffer_info->length = size;
- tx_buffer_info->dma = pci_map_page(adapter->pdev,
- frag->page,
- offset,
- size,
- PCI_DMA_TODEVICE);
+ tx_buffer_info->dma = map[f + 1] + offset;
tx_buffer_info->time_stamp = jiffies;
tx_buffer_info->next_to_watch = i;
len -= size;
offset += size;
count++;
- i++;
- if (i == tx_ring->count)
- i = 0;
}
}
- if (i == 0)
- i = tx_ring->count - 1;
- else
- i = i - 1;
+
tx_ring->tx_buffer_info[i].skb = skb;
tx_ring->tx_buffer_info[first].next_to_watch = i;
@@ -4389,13 +4386,19 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
(skb->ip_summed == CHECKSUM_PARTIAL))
tx_flags |= IXGBE_TX_FLAGS_CSUM;
- ixgbe_tx_queue(adapter, tx_ring, tx_flags,
- ixgbe_tx_map(adapter, tx_ring, skb, first),
- skb->len, hdr_len);
+ count = ixgbe_tx_map(adapter, tx_ring, skb, first);
- netdev->trans_start = jiffies;
+ if (count) {
+ ixgbe_tx_queue(adapter, tx_ring, tx_flags, count, skb->len,
+ hdr_len);
+ netdev->trans_start = jiffies;
+ ixgbe_maybe_stop_tx(netdev, tx_ring, DESC_NEEDED);
- ixgbe_maybe_stop_tx(netdev, tx_ring, DESC_NEEDED);
+ } else {
+ dev_kfree_skb_any(skb);
+ tx_ring->tx_buffer_info[first].time_stamp = 0;
+ tx_ring->next_to_use = first;
+ }
return NETDEV_TX_OK;
}
next prev parent reply other threads:[~2009-04-01 7:34 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-01 7:32 [PATCH 1/9] ixgbe: fix build when DEBUG is defined Jeff Kirsher
2009-04-01 7:33 ` [PATCH 2/9] ixgbe: Fix ethtool output with advertised mode Jeff Kirsher
2009-04-02 8:15 ` David Miller
2009-04-01 7:33 ` [PATCH 3/9] ixgbe: Fix DCB netlink layer for 82599 to enable Priority Flow Control Jeff Kirsher
2009-04-02 8:15 ` David Miller
2009-04-01 7:33 ` [PATCH 4/9] ixgbe: feature - driver to default with FC on Jeff Kirsher
2009-04-02 8:15 ` David Miller
2009-04-01 7:34 ` [PATCH 5/9] ixgbe: Fix 82598 MSI-X allocation on systems with more than 8 CPU cores Jeff Kirsher
2009-04-02 8:15 ` David Miller
2009-04-01 7:34 ` Jeff Kirsher [this message]
2009-04-02 8:15 ` [PATCH 6/9] ixgbe: refactor tx buffer processing to use skb_dma_map/unmap David Miller
2009-04-01 7:34 ` [PATCH 7/9] ixgbe: Patch to fix driver panic while freeing up tx & rx resources Jeff Kirsher
2009-04-02 8:15 ` David Miller
2009-04-01 7:35 ` [PATCH 8/9] ixgbe: fix ethtool -A|a behavior Jeff Kirsher
2009-04-02 8:16 ` David Miller
2009-04-01 7:35 ` [PATCH 9/9] ixgbe: Fix potential memory leak/driver panic issue while setting up Tx & Rx ring parameters Jeff Kirsher
2009-04-02 8:16 ` David Miller
2009-04-02 8:15 ` [PATCH 1/9] ixgbe: fix build when DEBUG is defined David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090401073423.3749.21206.stgit@lost.foo-projects.org \
--to=jeffrey.t.kirsher@intel.com \
--cc=alexander.h.duyck@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=mallikarjuna.chilakala@intel.com \
--cc=netdev@vger.kernel.org \
--cc=peter.p.waskiewicz.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).