From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [PATCH 08/10] ixgbe: Update the usage of orig_autoc to be more consistent
Date: Fri, 10 Apr 2009 01:28:33 -0700 [thread overview]
Message-ID: <20090410082832.14372.72843.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090410082618.14372.86091.stgit@localhost.localdomain>
From: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
The orig_autoc variable tracks the original setting of the autonegotiate
state prior to trying a new speed. The usage is inconsistent and not very
maintainable. This patch updates the usage to make it more consistent.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_82598.c | 15 +++++++++++----
drivers/net/ixgbe/ixgbe_82599.c | 37 ++++++++++++++++++++++++++++---------
2 files changed, 39 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c
index 2400fcf..89bc87a 100644
--- a/drivers/net/ixgbe/ixgbe_82598.c
+++ b/drivers/net/ixgbe/ixgbe_82598.c
@@ -165,12 +165,19 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
bool *autoneg)
{
s32 status = 0;
+ u32 autoc = 0;
/*
* Determine link capabilities based on the stored value of AUTOC,
- * which represents EEPROM defaults.
+ * which represents EEPROM defaults. If AUTOC value has not been
+ * stored, use the current register value.
*/
- switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) {
+ if (hw->mac.orig_link_settings_stored)
+ autoc = hw->mac.orig_autoc;
+ else
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
*speed = IXGBE_LINK_SPEED_1GB_FULL;
*autoneg = false;
@@ -189,9 +196,9 @@ static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw,
case IXGBE_AUTOC_LMS_KX4_AN:
case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
*speed = IXGBE_LINK_SPEED_UNKNOWN;
- if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
*autoneg = true;
break;
diff --git a/drivers/net/ixgbe/ixgbe_82599.c b/drivers/net/ixgbe/ixgbe_82599.c
index 9528d8b..2faf190 100644
--- a/drivers/net/ixgbe/ixgbe_82599.c
+++ b/drivers/net/ixgbe/ixgbe_82599.c
@@ -219,8 +219,19 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
bool *negotiation)
{
s32 status = 0;
+ u32 autoc = 0;
- switch (hw->mac.orig_autoc & IXGBE_AUTOC_LMS_MASK) {
+ /*
+ * Determine link capabilities based on the stored value of AUTOC,
+ * which represents EEPROM defaults. If AUTOC value has not been
+ * stored, use the current register value.
+ */
+ if (hw->mac.orig_link_settings_stored)
+ autoc = hw->mac.orig_autoc;
+ else
+ autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+ switch (autoc & IXGBE_AUTOC_LMS_MASK) {
case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
*speed = IXGBE_LINK_SPEED_1GB_FULL;
*negotiation = false;
@@ -244,22 +255,22 @@ s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
case IXGBE_AUTOC_LMS_KX4_KX_KR:
case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
*speed = IXGBE_LINK_SPEED_UNKNOWN;
- if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+ if (autoc & IXGBE_AUTOC_KR_SUPP)
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
*negotiation = true;
break;
case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
*speed = IXGBE_LINK_SPEED_100_FULL;
- if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+ if (autoc & IXGBE_AUTOC_KR_SUPP)
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+ if (autoc & IXGBE_AUTOC_KX4_SUPP)
*speed |= IXGBE_LINK_SPEED_10GB_FULL;
- if (hw->mac.orig_autoc & IXGBE_AUTOC_KX_SUPP)
+ if (autoc & IXGBE_AUTOC_KX_SUPP)
*speed |= IXGBE_LINK_SPEED_1GB_FULL;
*negotiation = true;
break;
@@ -570,6 +581,7 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
s32 status = 0;
u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
+ u32 orig_autoc = 0;
u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
@@ -581,6 +593,13 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg);
speed &= link_capabilities;
+ /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
+ if (hw->mac.orig_link_settings_stored)
+ orig_autoc = hw->mac.orig_autoc;
+ else
+ orig_autoc = autoc;
+
+
if (speed == IXGBE_LINK_SPEED_UNKNOWN) {
status = IXGBE_ERR_LINK_SETUP;
} else if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
@@ -589,9 +608,9 @@ s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw,
/* Set KX4/KX/KR support according to speed requested */
autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
if (speed & IXGBE_LINK_SPEED_10GB_FULL)
- if (hw->mac.orig_autoc & IXGBE_AUTOC_KX4_SUPP)
+ if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
autoc |= IXGBE_AUTOC_KX4_SUPP;
- if (hw->mac.orig_autoc & IXGBE_AUTOC_KR_SUPP)
+ if (orig_autoc & IXGBE_AUTOC_KR_SUPP)
autoc |= IXGBE_AUTOC_KR_SUPP;
if (speed & IXGBE_LINK_SPEED_1GB_FULL)
autoc |= IXGBE_AUTOC_KX_SUPP;
next prev parent reply other threads:[~2009-04-10 16:57 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-10 8:26 [PATCH 01/10] ixgbe: Enable another bit for flow control operation Jeff Kirsher
2009-04-10 8:26 ` [PATCH 02/10] ixgbe: fix IXGBE_MTQC values Jeff Kirsher
2009-04-11 9:50 ` David Miller
2009-04-10 8:27 ` [PATCH 03/10] ixgbe: add support for addition VT_CTL defines Jeff Kirsher
2009-04-11 9:50 ` David Miller
2009-04-10 8:27 ` [PATCH 04/10] ixgbe: add define to support 82599 64 IVAR registers Jeff Kirsher
2009-04-11 9:50 ` David Miller
2009-04-10 8:27 ` [PATCH 05/10] ixgbe: Don't return error in flow control configuration if FC is off Jeff Kirsher
2009-04-11 9:50 ` David Miller
2009-04-10 8:27 ` [PATCH 06/10] ixgbe: Move PHY ops initialization to centralize bus accesses Jeff Kirsher
2009-04-11 9:50 ` David Miller
2009-04-10 8:28 ` [PATCH 07/10] ixgbe: Remove unnecessary PHY reset, properly identify multispeed fiber modules Jeff Kirsher
2009-04-11 9:51 ` David Miller
2009-04-10 8:28 ` Jeff Kirsher [this message]
2009-04-11 9:51 ` [PATCH 08/10] ixgbe: Update the usage of orig_autoc to be more consistent David Miller
2009-04-10 8:28 ` [PATCH 09/10] ixgbe: Update get_physical_layer() calls, plus a version bump Jeff Kirsher
2009-04-11 9:51 ` David Miller
2009-04-10 8:29 ` [PATCH 10/10] Be explict with what we are !'ing in ixgbe_sfp_config_module_task() Jeff Kirsher
2009-04-11 9:51 ` David Miller
2009-04-11 9:49 ` [PATCH 01/10] ixgbe: Enable another bit for flow control operation David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090410082832.14372.72843.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=peter.p.waskiewicz.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).