* Re: [Bugme-new] [Bug 12971] New: "tg3 transmit timed out" when transmitting at high bitrate
[not found] <bug-12971-10286@http.bugzilla.kernel.org/>
@ 2009-04-01 23:43 ` Andrew Morton
[not found] ` <8627835b0904020136p32b80c31i718ce7b8fc988600@mail.gmail.com>
0 siblings, 1 reply; 2+ messages in thread
From: Andrew Morton @ 2009-04-01 23:43 UTC (permalink / raw)
To: netdev; +Cc: bugme-daemon, dobrev666, mcarlson, mchan
(switched to email. Please respond via emailed reply-to-all, not via the
bugzilla web interface).
On Sun, 29 Mar 2009 18:02:04 GMT
bugzilla-daemon@bugzilla.kernel.org wrote:
> http://bugzilla.kernel.org/show_bug.cgi?id=12971
>
> Summary: "tg3 transmit timed out" when transmitting at high
> bitrate
> Product: Drivers
> Version: 2.5
> Kernel Version: 2.6.29
> Platform: All
> OS/Version: Linux
> Tree: Mainline
> Status: NEW
> Severity: normal
> Priority: P1
> Component: Network
> AssignedTo: drivers_network@kernel-bugs.osdl.org
> ReportedBy: dobrev666@gmail.com
> Regression: No
>
>
> I have laptop - HP compaq 6715s with broadcom lan card (from lspci):
> 10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast
> Ethernet PCI Express (rev 02). I am using slackware 12.2. I compiled kernel
> 2.6.29 from kernel.org.
>
> When I try to copy a file trough the LAN from this laptop with a command like
> this:
> scp test.bin 192.168.0.1:/tmp
>
> Some MBytes are copied and the transmit stops and there is some messages in
> dmesg:
>
> WARNING: at net/sched/sch_generic.c:226 dev_watchdog+0x1c2/0x1d0()
> Hardware name: HP Compaq 6715s (GR897ES#ABB)
> NETDEV WATCHDOG: eth0 (tg3): transmit timed out
> Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq
> snd_seq_devic
> e snd_pcm_oss snd_mixer_oss ipv6 cpufreq_stats powernow_k8 freq_table ppdev lp
> parpor
> t_pc parport fuse snd_hda_codec_analog pcmcia snd_hda_intel snd_hda_codec tg3
> fan yen
> ta_socket snd_hwdep video rsrc_nonstatic rtc_cmos snd_pcm thermal output
> rtc_core pcm
> cia_core ati_agp processor libphy rtc_lib psmouse i2c_piix4 agpgart container
> snd_tim
> er snd thermal_sys sg serio_raw evdev button battery ac wmi shpchp soundcore
> k8temp s
> nd_page_alloc hwmon
> Pid: 0, comm: swapper Not tainted 2.6.29-smp #1
> Call Trace:
> [<c01294b6>] warn_slowpath+0x86/0xa0
> [<c0120030>] ? sd_init_MC+0xa0/0xd0
> [<c0120fce>] ? __enqueue_entity+0x8e/0xb0
> [<c03a483f>] ? cpumask_next_and+0x1f/0x40
> [<c012260a>] ? find_busiest_group+0x18a/0x710
> [<c011f8e5>] ? enqueue_task+0x15/0x30
> [<c03a94ed>] ? strlcpy+0x1d/0x60
> [<c06bfc02>] dev_watchdog+0x1c2/0x1d0
> [<c014320b>] ? getnstimeofday+0x4b/0x120
> [<c01320f4>] run_timer_softirq+0x124/0x190
> [<c06bfa40>] ? dev_watchdog+0x0/0x1d0
> [<c012e03a>] __do_softirq+0x8a/0x150
> [<c0132614>] ? update_process_times+0x54/0x70
> [<c012e13b>] do_softirq+0x3b/0x50
> [<c012e47b>] irq_exit+0x3b/0x50
> [<c011467e>] smp_apic_timer_interrupt+0x5e/0x90
> [<c0103940>] apic_timer_interrupt+0x28/0x30
> [<c0109978>] ? default_idle+0x38/0x50
> [<c0109b80>] c1e_idle+0x90/0xf0
> [<c0109b91>] ? c1e_idle+0xa1/0xf0
> [<c0101bea>] cpu_idle+0x4a/0x70
> [<c072f705>] rest_init+0x55/0x60
> ---[ end trace 0c67ed7bcfb14db6 ]---
> tg3: eth0: transmit timed out, resetting
> tg3: DEBUG: MAC_TX_STATUS[00000008] MAC_RX_STATUS[00000000]
> tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
> tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
> tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
> tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
> tg3: eth0: Link is down.
> tg3: eth0: Link is up at 100 Mbps, full duplex.
> tg3: eth0: Flow control is on for TX and on for RX.
>
> After that I cannot send or receive any data through the LAN. There is no ping
> to anywhere.
> These commands fix the problem:
>
> ip l set dev eth0 down
> ip l set dev eth0 up
>
> And when I execute `scp test.bin 192.168.0.1:/tmp` there is no network again.
>
> But this laptop has no problems when receiving data. I can copy with scp from
> other PC connected to the same lan with 11Mbytes/s.
>
> I have search the web to find a solution with no success.
> I have tried some kernel options like "irqpoll" and "acpi=off" with no success.
I assume that 2.6.28 was OK, and that this is a regression?
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Bugme-new] [Bug 12971] New: "tg3 transmit timed out" when transmitting at high bitrate
[not found] ` <8627835b0904020136p32b80c31i718ce7b8fc988600@mail.gmail.com>
@ 2009-04-15 23:05 ` Matt Carlson
0 siblings, 0 replies; 2+ messages in thread
From: Matt Carlson @ 2009-04-15 23:05 UTC (permalink / raw)
To: Nikolay Dobrev
Cc: Andrew Morton, netdev@vger.kernel.org,
bugme-daemon@bugzilla.kernel.org, Matthew Carlson, Michael Chan
On Thu, Apr 02, 2009 at 01:36:23AM -0700, Nikolay Dobrev wrote:
> Hi,
>
> On Thu, Apr 2, 2009 at 2:43 AM, Andrew Morton <akpm@linux-foundation.org<mailto:akpm@linux-foundation.org>> wrote:
>
> (switched to email. Please respond via emailed reply-to-all, not via the
> bugzilla web interface).
>
> On Sun, 29 Mar 2009 18:02:04 GMT
> bugzilla-daemon@bugzilla.kernel.org<mailto:bugzilla-daemon@bugzilla.kernel.org> wrote:
>
> > http://bugzilla.kernel.org/show_bug.cgi?id=12971
> >
> > Summary: "tg3 transmit timed out" when transmitting at high
> > bitrate
> > Product: Drivers
> > Version: 2.5
> > Kernel Version: 2.6.29
> > Platform: All
> > OS/Version: Linux
> > Tree: Mainline
> > Status: NEW
> > Severity: normal
> > Priority: P1
> > Component: Network
> > AssignedTo: drivers_network@kernel-bugs.osdl.org<mailto:drivers_network@kernel-bugs.osdl.org>
> > ReportedBy: dobrev666@gmail.com<mailto:dobrev666@gmail.com>
> > Regression: No
> >
> >
> > I have laptop - HP compaq 6715s with broadcom lan card (from lspci):
> > 10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5906M Fast
> > Ethernet PCI Express (rev 02). I am using slackware 12.2. I compiled kernel
> > 2.6.29 from kernel.org<http://kernel.org>.
> >
> > When I try to copy a file trough the LAN from this laptop with a command like
> > this:
> > scp test.bin 192.168.0.1:/tmp
> >
> > Some MBytes are copied and the transmit stops and there is some messages in
> > dmesg:
> >
> > WARNING: at net/sched/sch_generic.c:226 dev_watchdog+0x1c2/0x1d0()
> > Hardware name: HP Compaq 6715s (GR897ES#ABB)
> > NETDEV WATCHDOG: eth0 (tg3): transmit timed out
> > Modules linked in: snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq
> > snd_seq_devic
> > e snd_pcm_oss snd_mixer_oss ipv6 cpufreq_stats powernow_k8 freq_table ppdev lp
> > parpor
> > t_pc parport fuse snd_hda_codec_analog pcmcia snd_hda_intel snd_hda_codec tg3
> > fan yen
> > ta_socket snd_hwdep video rsrc_nonstatic rtc_cmos snd_pcm thermal output
> > rtc_core pcm
> > cia_core ati_agp processor libphy rtc_lib psmouse i2c_piix4 agpgart container
> > snd_tim
> > er snd thermal_sys sg serio_raw evdev button battery ac wmi shpchp soundcore
> > k8temp s
> > nd_page_alloc hwmon
> > Pid: 0, comm: swapper Not tainted 2.6.29-smp #1
> > Call Trace:
> > [<c01294b6>] warn_slowpath+0x86/0xa0
> > [<c0120030>] ? sd_init_MC+0xa0/0xd0
> > [<c0120fce>] ? __enqueue_entity+0x8e/0xb0
> > [<c03a483f>] ? cpumask_next_and+0x1f/0x40
> > [<c012260a>] ? find_busiest_group+0x18a/0x710
> > [<c011f8e5>] ? enqueue_task+0x15/0x30
> > [<c03a94ed>] ? strlcpy+0x1d/0x60
> > [<c06bfc02>] dev_watchdog+0x1c2/0x1d0
> > [<c014320b>] ? getnstimeofday+0x4b/0x120
> > [<c01320f4>] run_timer_softirq+0x124/0x190
> > [<c06bfa40>] ? dev_watchdog+0x0/0x1d0
> > [<c012e03a>] __do_softirq+0x8a/0x150
> > [<c0132614>] ? update_process_times+0x54/0x70
> > [<c012e13b>] do_softirq+0x3b/0x50
> > [<c012e47b>] irq_exit+0x3b/0x50
> > [<c011467e>] smp_apic_timer_interrupt+0x5e/0x90
> > [<c0103940>] apic_timer_interrupt+0x28/0x30
> > [<c0109978>] ? default_idle+0x38/0x50
> > [<c0109b80>] c1e_idle+0x90/0xf0
> > [<c0109b91>] ? c1e_idle+0xa1/0xf0
> > [<c0101bea>] cpu_idle+0x4a/0x70
> > [<c072f705>] rest_init+0x55/0x60
> > ---[ end trace 0c67ed7bcfb14db6 ]---
> > tg3: eth0: transmit timed out, resetting
> > tg3: DEBUG: MAC_TX_STATUS[00000008] MAC_RX_STATUS[00000000]
> > tg3: DEBUG: RDMAC_STATUS[00000000] WDMAC_STATUS[00000000]
> > tg3: tg3_stop_block timed out, ofs=1400 enable_bit=2
> > tg3: tg3_stop_block timed out, ofs=c00 enable_bit=2
> > tg3: tg3_stop_block timed out, ofs=4800 enable_bit=2
> > tg3: eth0: Link is down.
> > tg3: eth0: Link is up at 100 Mbps, full duplex.
> > tg3: eth0: Flow control is on for TX and on for RX.
> >
> > After that I cannot send or receive any data through the LAN. There is no ping
> > to anywhere.
> > These commands fix the problem:
> >
> > ip l set dev eth0 down
> > ip l set dev eth0 up
> >
> > And when I execute `scp test.bin 192.168.0.1:/tmp` there is no network again.
> >
> > But this laptop has no problems when receiving data. I can copy with scp from
> > other PC connected to the same lan with 11Mbytes/s.
> >
> > I have search the web to find a solution with no success.
> > I have tried some kernel options like "irqpoll" and "acpi=off" with no success.
>
> I assume that 2.6.28 was OK, and that this is a regression?
>
> I have not tried 2.6.28, but 2.6.27.9 and there is no difference. If you wish I can try 2.6.28. If you need additional information I will try to send it.
Does the problem go away if you try "pcie_aspm=off"?
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2009-04-15 23:05 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <bug-12971-10286@http.bugzilla.kernel.org/>
2009-04-01 23:43 ` [Bugme-new] [Bug 12971] New: "tg3 transmit timed out" when transmitting at high bitrate Andrew Morton
[not found] ` <8627835b0904020136p32b80c31i718ce7b8fc988600@mail.gmail.com>
2009-04-15 23:05 ` Matt Carlson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).