public inbox for netdev@vger.kernel.org
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
	Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-2.6 PATCH] ixgbe: Fix WoL functionality for 82599 KX4 devices
Date: Thu, 23 Apr 2009 14:15:18 -0700	[thread overview]
Message-ID: <20090423211514.29345.14658.stgit@localhost.localdomain> (raw)

From: Waskiewicz Jr, Peter P <peter.p.waskiewicz.jr@intel.com>

The current code writes the PME enabled bit in PCI config space which is
wrong.  This was needed for pre-release hardware, and was not removed from
the driver.  Also, we need to clear the WUS (wake up status) after we
resume.  Otherwise we can't wake for the same event again since it's still
asserted in the hardware.  Plus, the multicast lists were being written
improperly, causing multicast WoL to fail.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

 drivers/net/ixgbe/ixgbe_common.c |   51 +-------------------------------------
 drivers/net/ixgbe/ixgbe_main.c   |   10 +++----
 2 files changed, 6 insertions(+), 55 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index 5567519..186a650 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -50,7 +50,6 @@ static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw);
 static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index);
 static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
 static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
-static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
 static void ixgbe_add_uc_addr(struct ixgbe_hw *hw, u8 *addr, u32 vmdq);
 
 /**
@@ -1377,8 +1376,7 @@ s32 ixgbe_update_uc_addr_list_generic(struct ixgbe_hw *hw, u8 *addr_list,
 	 * Clear accounting of old secondary address list,
 	 * don't count RAR[0]
 	 */
-	uc_addr_in_use = hw->addr_ctrl.rar_used_count -
-	                 hw->addr_ctrl.mc_addr_in_rar_count - 1;
+	uc_addr_in_use = hw->addr_ctrl.rar_used_count - 1;
 	hw->addr_ctrl.rar_used_count -= uc_addr_in_use;
 	hw->addr_ctrl.overflow_promisc = 0;
 
@@ -1493,40 +1491,6 @@ static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
 }
 
 /**
- *  ixgbe_add_mc_addr - Adds a multicast address.
- *  @hw: pointer to hardware structure
- *  @mc_addr: new multicast address
- *
- *  Adds it to unused receive address register or to the multicast table.
- **/
-static void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
-{
-	u32 rar_entries = hw->mac.num_rar_entries;
-	u32 rar;
-
-	hw_dbg(hw, " MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n",
-	       mc_addr[0], mc_addr[1], mc_addr[2],
-	       mc_addr[3], mc_addr[4], mc_addr[5]);
-
-	/*
-	 * Place this multicast address in the RAR if there is room,
-	 * else put it in the MTA
-	 */
-	if (hw->addr_ctrl.rar_used_count < rar_entries) {
-		/* use RAR from the end up for multicast */
-		rar = rar_entries - hw->addr_ctrl.mc_addr_in_rar_count - 1;
-		hw->mac.ops.set_rar(hw, rar, mc_addr, 0, IXGBE_RAH_AV);
-		hw_dbg(hw, "Added a multicast address to RAR[%d]\n", rar);
-		hw->addr_ctrl.rar_used_count++;
-		hw->addr_ctrl.mc_addr_in_rar_count++;
-	} else {
-		ixgbe_set_mta(hw, mc_addr);
-	}
-
-	hw_dbg(hw, "ixgbe_add_mc_addr Complete\n");
-}
-
-/**
  *  ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
  *  @hw: pointer to hardware structure
  *  @mc_addr_list: the list of new multicast addresses
@@ -1542,7 +1506,6 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
                                       u32 mc_addr_count, ixgbe_mc_addr_itr next)
 {
 	u32 i;
-	u32 rar_entries = hw->mac.num_rar_entries;
 	u32 vmdq;
 
 	/*
@@ -1550,18 +1513,8 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
 	 * use.
 	 */
 	hw->addr_ctrl.num_mc_addrs = mc_addr_count;
-	hw->addr_ctrl.rar_used_count -= hw->addr_ctrl.mc_addr_in_rar_count;
-	hw->addr_ctrl.mc_addr_in_rar_count = 0;
 	hw->addr_ctrl.mta_in_use = 0;
 
-	/* Zero out the other receive addresses. */
-	hw_dbg(hw, "Clearing RAR[%d-%d]\n", hw->addr_ctrl.rar_used_count,
-	          rar_entries - 1);
-	for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) {
-		IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
-		IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
-	}
-
 	/* Clear the MTA */
 	hw_dbg(hw, " Clearing MTA\n");
 	for (i = 0; i < hw->mac.mcft_size; i++)
@@ -1570,7 +1523,7 @@ s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
 	/* Add the new addresses */
 	for (i = 0; i < mc_addr_count; i++) {
 		hw_dbg(hw, " Adding the multicast addresses:\n");
-		ixgbe_add_mc_addr(hw, next(hw, &mc_addr_list, &vmdq));
+		ixgbe_set_mta(hw, next(hw, &mc_addr_list, &vmdq));
 	}
 
 	/* Enable mta */
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 0188425..07e778d 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3646,6 +3646,8 @@ static int ixgbe_resume(struct pci_dev *pdev)
 
 	ixgbe_reset(adapter);
 
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0);
+
 	if (netif_running(netdev)) {
 		err = ixgbe_open(adapter->netdev);
 		if (err)
@@ -4575,7 +4577,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 	const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data];
 	static int cards_found;
 	int i, err, pci_using_dac;
-	u16 pm_value = 0;
 	u32 part_num, eec;
 
 	err = pci_enable_device(pdev);
@@ -4763,11 +4764,8 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 
 	switch (pdev->device) {
 	case IXGBE_DEV_ID_82599_KX4:
-#define IXGBE_PCIE_PMCSR 0x44
-		adapter->wol = IXGBE_WUFC_MAG;
-		pci_read_config_word(pdev, IXGBE_PCIE_PMCSR, &pm_value);
-		pci_write_config_word(pdev, IXGBE_PCIE_PMCSR,
-		                      (pm_value | (1 << 8)));
+		adapter->wol = (IXGBE_WUFC_MAG | IXGBE_WUFC_EX |
+		                IXGBE_WUFC_MC | IXGBE_WUFC_BC);
 		break;
 	default:
 		adapter->wol = 0;


             reply	other threads:[~2009-04-23 21:15 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-04-23 21:15 Jeff Kirsher [this message]
2009-04-27 10:14 ` [net-2.6 PATCH] ixgbe: Fix WoL functionality for 82599 KX4 devices David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090423211514.29345.14658.stgit@localhost.localdomain \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=davem@davemloft.net \
    --cc=gospo@redhat.com \
    --cc=netdev@vger.kernel.org \
    --cc=peter.p.waskiewicz.jr@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox