From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Miller Subject: Re: [PATCH] smsc911x: add fifo byteswap support V2 Date: Tue, 28 Apr 2009 01:53:57 -0700 (PDT) Message-ID: <20090428.015357.206101535.davem@davemloft.net> References: <20090428073216.16015.15940.sendpatchset@rx1.opensource.se> Mime-Version: 1.0 Content-Type: Text/Plain; charset=us-ascii Content-Transfer-Encoding: 7bit Cc: magnus.damm@gmail.com, Ian.Saturley@smsc.com, iwamatsu@nigauri.org, lethal@linux-sh.org, netdev@vger.kernel.org To: Steve.Glendinning@smsc.com Return-path: Received: from 74-93-104-97-Washington.hfc.comcastbusiness.net ([74.93.104.97]:37594 "EHLO sunset.davemloft.net" rhost-flags-OK-FAIL-OK-OK) by vger.kernel.org with ESMTP id S1752922AbZD1IyE (ORCPT ); Tue, 28 Apr 2009 04:54:04 -0400 In-Reply-To: Sender: netdev-owner@vger.kernel.org List-ID: From: Steve.Glendinning@smsc.com Date: Tue, 28 Apr 2009 09:21:42 +0100 > Magnus Damm wrote on 28/04/2009 08:32:16: > >> From: Magnus Damm >> >> This is V2 of the smsc911x fifo byteswap patch. >> >> The smsc911x hardware supports both big and little and endian >> hardware configurations, and the linux smsc911x driver currently >> detects word order. >> >> For correct operation on big endian platforms lacking swapped >> byte lanes the following patch is needed. Only fifo data is >> swapped, register data does not require any swapping. >> >> Signed-off-by: Magnus Damm >> --- > > Acked-by: Steve Glendinning Applied.