From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next PATCH 6/6] ixgbe: enable hardware offload for sctp
Date: Tue, 28 Apr 2009 01:36:35 -0700 [thread overview]
Message-ID: <20090428083634.32417.6021.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090428083445.32417.77682.stgit@localhost.localdomain>
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
Inspired by: Vlad Yasevich <vladislav.yasevich@hp.com>
This is the code to enable ixgbe for hardware offload support
of CRC32c on both transmit and receive of SCTP traffic.
only 82599 supports this offload, not 82598.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_ethtool.c | 11 +++++++++--
drivers/net/ixgbe/ixgbe_main.c | 9 +++++++++
2 files changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_ethtool.c b/drivers/net/ixgbe/ixgbe_ethtool.c
index f0a20fa..a499b6b 100644
--- a/drivers/net/ixgbe/ixgbe_ethtool.c
+++ b/drivers/net/ixgbe/ixgbe_ethtool.c
@@ -311,10 +311,17 @@ static u32 ixgbe_get_tx_csum(struct net_device *netdev)
static int ixgbe_set_tx_csum(struct net_device *netdev, u32 data)
{
- if (data)
+ struct ixgbe_adapter *adapter = netdev_priv(netdev);
+
+ if (data) {
netdev->features |= (NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
- else
+ if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+ netdev->features |= NETIF_F_SCTP_CSUM;
+ } else {
netdev->features &= ~(NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM);
+ if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+ netdev->features &= ~NETIF_F_SCTP_CSUM;
+ }
return 0;
}
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 42b803d..c3dff8f 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -4189,12 +4189,18 @@ static bool ixgbe_tx_csum(struct ixgbe_adapter *adapter,
if (ip_hdr(skb)->protocol == IPPROTO_TCP)
type_tucmd_mlhl |=
IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ else if (ip_hdr(skb)->protocol == IPPROTO_SCTP)
+ type_tucmd_mlhl |=
+ IXGBE_ADVTXD_TUCMD_L4T_SCTP;
break;
case cpu_to_be16(ETH_P_IPV6):
/* XXX what about other V6 headers?? */
if (ipv6_hdr(skb)->nexthdr == IPPROTO_TCP)
type_tucmd_mlhl |=
IXGBE_ADVTXD_TUCMD_L4T_TCP;
+ else if (ipv6_hdr(skb)->nexthdr == IPPROTO_SCTP)
+ type_tucmd_mlhl |=
+ IXGBE_ADVTXD_TUCMD_L4T_SCTP;
break;
default:
if (unlikely(net_ratelimit())) {
@@ -4718,6 +4724,9 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
netdev->features |= NETIF_F_TSO6;
netdev->features |= NETIF_F_GRO;
+ if (adapter->hw.mac.type == ixgbe_mac_82599EB)
+ netdev->features |= NETIF_F_SCTP_CSUM;
+
netdev->vlan_features |= NETIF_F_TSO;
netdev->vlan_features |= NETIF_F_TSO6;
netdev->vlan_features |= NETIF_F_IP_CSUM;
next prev parent reply other threads:[~2009-04-28 8:36 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-28 8:34 [net-next PATCH 1/6] igb: reconfigure mailbox timeout logic Jeff Kirsher
2009-04-28 8:35 ` [net-next PATCH 2/6] igb: make rxcsum configuration seperate from multiqueue Jeff Kirsher
2009-04-28 8:54 ` David Miller
2009-04-28 8:35 ` [net-next PATCH 3/6] igb/ixgbe: remove unecessary checks for CHECKSUM_UNNECESSARY Jeff Kirsher
2009-04-28 8:54 ` David Miller
2009-04-28 8:35 ` [net-next PATCH 4/6] sctp: add feature bit for SCTP offload in hardware Jeff Kirsher
2009-04-28 8:54 ` David Miller
2009-04-28 8:36 ` [net-next PATCH 5/6] igb: Enable SCTP checksum offloading Jeff Kirsher
2009-04-28 8:54 ` David Miller
2009-04-28 8:36 ` Jeff Kirsher [this message]
2009-04-28 8:55 ` [net-next PATCH 6/6] ixgbe: enable hardware offload for sctp David Miller
2009-04-28 8:54 ` [net-next PATCH 1/6] igb: reconfigure mailbox timeout logic David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090428083634.32417.6021.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=jesse.brandeburg@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox