From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, linux-scsi@vger.kernel.org,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next-2.6 PATCH 08/11] ixgbe: Set Priority Flow Control low water threshhold for DCB
Date: Sun, 17 May 2009 15:34:55 -0700 [thread overview]
Message-ID: <20090517223455.14124.12286.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090517223213.14124.61405.stgit@localhost.localdomain>
From: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
This sets the low water threshhold for priority flow control for 82598
and 82599 controllers in DCB mode.
Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_common.c | 48 +++++++++++++++++++++++++++++---------
1 files changed, 37 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_common.c b/drivers/net/ixgbe/ixgbe_common.c
index af39275..530da90 100644
--- a/drivers/net/ixgbe/ixgbe_common.c
+++ b/drivers/net/ixgbe/ixgbe_common.c
@@ -1589,6 +1589,13 @@ s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
u32 mflcn_reg;
u32 fccfg_reg;
u32 reg;
+ u32 rx_pba_size;
+
+#ifdef CONFIG_DCB
+ if (hw->fc.requested_mode == ixgbe_fc_pfc)
+ goto out;
+
+#endif /* CONFIG_DCB */
mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN);
mflcn_reg &= ~(IXGBE_MFLCN_RFCE | IXGBE_MFLCN_RPFCE);
@@ -1651,21 +1658,40 @@ s32 ixgbe_fc_enable(struct ixgbe_hw *hw, s32 packetbuf_num)
IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg);
IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg);
- /* Set up and enable Rx high/low water mark thresholds, enable XON. */
- if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
- if (hw->fc.send_xon)
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num),
- (hw->fc.low_water | IXGBE_FCRTL_XONE));
- else
- IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num),
- hw->fc.low_water);
+ reg = IXGBE_READ_REG(hw, IXGBE_MTQC);
+ /* Thresholds are different for link flow control when in DCB mode */
+ if (reg & IXGBE_MTQC_RT_ENA) {
+ rx_pba_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(packetbuf_num));
- IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num),
- (hw->fc.high_water | IXGBE_FCRTH_FCEN));
+ /* Always disable XON for LFC when in DCB mode */
+ reg = (rx_pba_size >> 2) & 0xFFE0;
+ if (hw->fc.current_mode & ixgbe_fc_tx_pause)
+ reg |= IXGBE_FCRTH_FCEN;
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), reg);
+ } else {
+ /*
+ * Set up and enable Rx high/low water mark thresholds,
+ * enable XON.
+ */
+ if (hw->fc.current_mode & ixgbe_fc_tx_pause) {
+ if (hw->fc.send_xon) {
+ IXGBE_WRITE_REG(hw,
+ IXGBE_FCRTL_82599(packetbuf_num),
+ (hw->fc.low_water |
+ IXGBE_FCRTL_XONE));
+ } else {
+ IXGBE_WRITE_REG(hw,
+ IXGBE_FCRTL_82599(packetbuf_num),
+ hw->fc.low_water);
+ }
+
+ IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num),
+ (hw->fc.high_water | IXGBE_FCRTH_FCEN));
+ }
}
/* Configure pause time (2 TCs per register) */
- reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num));
+ reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2));
if ((packetbuf_num & 1) == 0)
reg = (reg & 0xFFFF0000) | hw->fc.pause_time;
else
next prev parent reply other threads:[~2009-05-17 22:34 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-05-17 22:32 [net-next-2.6 PATCH 01/11] ixgbe: Add FCoE Storage MAC Address support Jeff Kirsher
2009-05-17 22:32 ` [net-next-2.6 PATCH 02/11] ixgbe: Add SAN MAC address to the RAR, return the address to DCB Jeff Kirsher
2009-05-17 22:33 ` [net-next-2.6 PATCH 03/11] fcoe: consolidates netdev related config and cleanup for spma mode Jeff Kirsher
2009-05-17 22:33 ` [net-next-2.6 PATCH 04/11] fcoe: adds spma mode support Jeff Kirsher
2009-05-17 22:33 ` [net-next-2.6 PATCH 05/11] ixgbe: Add RING_F_FCOE for FCoE feature in 82599 Jeff Kirsher
2009-05-17 22:34 ` [net-next-2.6 PATCH 06/11] ixgbe: Enable FCoE redirection table " Jeff Kirsher
2009-05-17 22:34 ` [net-next-2.6 PATCH 07/11] ixgbe: Enable jumbo frame for FCoE " Jeff Kirsher
2009-05-17 22:34 ` Jeff Kirsher [this message]
2009-05-17 22:35 ` [net-next-2.6 PATCH 09/11] ixgbe: Allow link flow control in DCB mode for 82599 adapters Jeff Kirsher
2009-05-17 22:35 ` [net-next-2.6 PATCH 10/11] ixgbe: When in DCB mode with PFC enabled, show LFC is disabled Jeff Kirsher
2009-05-17 22:35 ` [net-next-2.6 PATCH 11/11] ixgbe: Don't reset the hardware when switching between LFC and PFC Jeff Kirsher
2009-05-18 4:08 ` [net-next-2.6 PATCH 01/11] ixgbe: Add FCoE Storage MAC Address support David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090517223455.14124.12286.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=linux-scsi@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=peter.p.waskiewicz.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).