Re: [PATCH 2.6.30-rc4] r8169: avoid losing MSI interrupts

[Michael Buesch <mb@bu3sch.de>]

On Saturday 23 May 2009 17:01:36 Michael Riepe wrote:
> The client, since I wanted to measure write throughput. The server is a
> Lenovo Thinkpad T60 (e1000e driver).
> 
> > I'm running the iperf server on the r8169 and get the following results:
> > 
> > mb@homer:~$ iperf -c 192.168.2.50 -t120 -i10
> 
> In that case, the r8169 is receiving data (which never was a problem, at
> least for me - it only lost interrupts in TX mode).

Ok, I tested the other way around and it shows the problem:

mb@quimby:~/kernel$ iperf -c 192.168.2.205 -t120 -i10
------------------------------------------------------------
Client connecting to 192.168.2.205, TCP port 5001
TCP window size: 16.0 KByte (default)
------------------------------------------------------------
[  3] local 192.168.2.50 port 34788 connected with 192.168.2.205 port 5001
[ ID] Interval       Transfer     Bandwidth
[  3]  0.0-10.0 sec    501 MBytes    420 Mbits/sec
[  3] 10.0-20.0 sec    533 MBytes    447 Mbits/sec
[  3] 20.0-30.0 sec    699 MBytes    587 Mbits/sec
[  3] 30.0-40.0 sec    715 MBytes    600 Mbits/sec
[  3] 40.0-50.0 sec    469 MBytes    394 Mbits/sec
[  3] 50.0-60.0 sec    466 MBytes    391 Mbits/sec
[  3] 60.0-70.0 sec    464 MBytes    389 Mbits/sec
[  3] 70.0-80.0 sec    498 MBytes    418 Mbits/sec
[  3] 80.0-90.0 sec    477 MBytes    400 Mbits/sec
[  3] 90.0-100.0 sec    601 MBytes    504 Mbits/sec
[  3] 100.0-110.0 sec    696 MBytes    584 Mbits/sec
[  3] 110.0-120.0 sec    510 MBytes    428 Mbits/sec
[  3]  0.0-120.0 sec  6.47 GBytes    463 Mbits/sec


-- 
Greetings, Michael.