netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@vyatta.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org
Subject: [PATCH 5/9] sky2: receive counter update
Date: Wed, 17 Jun 2009 10:30:36 -0700	[thread overview]
Message-ID: <20090617173139.956656294@vyatta.com> (raw)
In-Reply-To: 20090617173031.703636683@vyatta.com

[-- Attachment #1: sky2-rxupdate.patch --]
[-- Type: text/plain, Size: 1987 bytes --]

Since it is likely that there are multiple packets received per
interrupt, only update the receive counters once after all
packets are processed.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>


--- a/drivers/net/sky2.c	2009-06-17 10:29:55.361810536 -0700
+++ b/drivers/net/sky2.c	2009-06-17 10:29:56.510685400 -0700
@@ -2357,11 +2357,25 @@ static inline void sky2_tx_done(struct n
 	}
 }
 
+static inline void sky2_rx_done(struct sky2_hw *hw, unsigned port,
+				unsigned packets, unsigned bytes)
+{
+	if (packets) {
+		struct net_device *dev = hw->dev[port];
+
+		dev->stats.rx_packets += packets;
+		dev->stats.rx_bytes += bytes;
+		dev->last_rx = jiffies;
+		sky2_rx_update(netdev_priv(dev), rxqaddr[port]);
+	}
+}
+
 /* Process status response ring */
 static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)
 {
 	int work_done = 0;
-	unsigned rx[2] = { 0, 0 };
+	unsigned int total_bytes[2] = { 0 };
+	unsigned int total_packets[2] = { 0 };
 
 	rmb();
 	do {
@@ -2388,7 +2402,8 @@ static int sky2_status_intr(struct sky2_
 		le->opcode = 0;
 		switch (opcode & ~HW_OWNER) {
 		case OP_RXSTAT:
-			++rx[port];
+			total_packets[port]++;
+			total_bytes[port] += length;
 			skb = sky2_receive(dev, length, status);
 			if (unlikely(!skb)) {
 				dev->stats.rx_dropped++;
@@ -2406,9 +2421,6 @@ static int sky2_status_intr(struct sky2_
 			}
 
 			skb->protocol = eth_type_trans(skb, dev);
-			dev->stats.rx_packets++;
-			dev->stats.rx_bytes += skb->len;
-			dev->last_rx = jiffies;
 
 #ifdef SKY2_VLAN_TAG_USED
 			if (sky2->vlgrp && (status & GMR_FS_VLAN)) {
@@ -2487,11 +2499,8 @@ static int sky2_status_intr(struct sky2_
 	sky2_write32(hw, STAT_CTRL, SC_STAT_CLR_IRQ);
 
 exit_loop:
-	if (rx[0])
-		sky2_rx_update(netdev_priv(hw->dev[0]), Q_R1);
-
-	if (rx[1])
-		sky2_rx_update(netdev_priv(hw->dev[1]), Q_R2);
+	sky2_rx_done(hw, 0, total_packets[0], total_bytes[0]);
+	sky2_rx_done(hw, 1, total_packets[1], total_bytes[1]);
 
 	return work_done;
 }

-- 


  parent reply	other threads:[~2009-06-17 17:34 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-06-17 17:30 [PATCH 0/9] sky2 driver patches Stephen Hemminger
2009-06-17 17:30 ` [PATCH 1/9] sky2: turn off pause during shutdown Stephen Hemminger
2009-06-18  1:50   ` David Miller
2009-06-17 17:30 ` [PATCH 2/9] sky2: more receive shutdown Stephen Hemminger
2009-06-18  1:50   ` David Miller
2009-06-20  7:14   ` Graham Murray
2009-06-22  5:13     ` Graham Murray
2009-06-17 17:30 ` [PATCH 3/9] sky2: PCI irq issues Stephen Hemminger
2009-06-18  1:50   ` David Miller
2009-06-17 17:30 ` [PATCH 4/9] sky2: fix shutdown synchronization Stephen Hemminger
2009-06-18  1:50   ` David Miller
2009-06-18 23:25   ` Mike McCormack
2009-06-18 23:41     ` Stephen Hemminger
2009-06-18 23:53       ` Mike McCormack
2009-06-17 17:30 ` Stephen Hemminger [this message]
2009-06-18  1:51   ` [PATCH 5/9] sky2: receive counter update David Miller
2009-06-17 17:30 ` [PATCH 6/9] sky2: reduce default transmit ring Stephen Hemminger
2009-06-18  1:51   ` David Miller
2009-06-17 17:30 ` [PATCH 7/9] sky2: skb recycling Stephen Hemminger
2009-06-18  1:51   ` David Miller
2009-06-18 21:13   ` Brandeburg, Jesse
2009-06-18 21:22     ` Stephen Hemminger
2009-06-17 17:30 ` [PATCH 8/9] sky2: add GRO support Stephen Hemminger
2009-06-18  1:52   ` David Miller
2009-06-17 17:30 ` [PATCH 9/9] sky2: version 1.23 Stephen Hemminger
2009-06-18  1:52   ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090617173139.956656294@vyatta.com \
    --to=shemminger@vyatta.com \
    --cc=davem@davemloft.net \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).