netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
	Don Skidmore <donald.c.skidmore@intel.com>,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-2.6 PATCH 1/4] ixgbe: fix issues with failing to detect insert of unsupported module
Date: Thu, 02 Jul 2009 15:50:12 -0700	[thread overview]
Message-ID: <20090702225012.22746.57218.stgit@localhost.localdomain> (raw)

From: Don Skidmore <donald.c.skidmore@intel.com>

Several small fixes around negative test case of the insertion of a
IXGBE_ERR_NOT_SUPPORTED module.

- mdio45_probe call was always failing due to mdio.prtad not being
set.  The function set to mdio.mdio_read was still working as we just
happen to always be at prtad == 0.  This will allow us to set the phy_id
and phy.type correctly now.

- There was timing issue with i2c calls when initiated from a tasklet.
A small delay was added to allow the electrical oscillation to calm down.

- Logic change in ixgbe_sfp_task that allows NOT_SUPPORTED condition
to be recognized.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

 drivers/net/ixgbe/ixgbe_main.c |    8 ++++++--
 drivers/net/ixgbe/ixgbe_phy.c  |    3 +++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 5588ef4..aaf482c 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -3724,7 +3724,7 @@ static void ixgbe_sfp_task(struct work_struct *work)
 	if ((hw->phy.type == ixgbe_phy_nl) &&
 	    (hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
 		s32 ret = hw->phy.ops.identify_sfp(hw);
-		if (ret)
+		if (ret == IXGBE_ERR_SFP_NOT_PRESENT)
 			goto reschedule;
 		ret = hw->phy.ops.reset(hw);
 		if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
@@ -4534,13 +4534,17 @@ static void ixgbe_sfp_config_module_task(struct work_struct *work)
 	u32 err;
 
 	adapter->flags |= IXGBE_FLAG_IN_SFP_MOD_TASK;
+
+	/* Time for electrical oscillations to settle down */
+	msleep(100);
 	err = hw->phy.ops.identify_sfp(hw);
+
 	if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
 		dev_err(&adapter->pdev->dev, "failed to initialize because "
 			"an unsupported SFP+ module type was detected.\n"
 			"Reload the driver after installing a supported "
 			"module.\n");
-		ixgbe_down(adapter);
+		unregister_netdev(adapter->netdev);
 		return;
 	}
 	hw->mac.ops.setup_sfp(hw);
diff --git a/drivers/net/ixgbe/ixgbe_phy.c b/drivers/net/ixgbe/ixgbe_phy.c
index 453e966..9ecad17 100644
--- a/drivers/net/ixgbe/ixgbe_phy.c
+++ b/drivers/net/ixgbe/ixgbe_phy.c
@@ -60,6 +60,7 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 
 	if (hw->phy.type == ixgbe_phy_unknown) {
 		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+			hw->phy.mdio.prtad = phy_addr;
 			if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) {
 				ixgbe_get_phy_id(hw);
 				hw->phy.type =
@@ -68,6 +69,8 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 				break;
 			}
 		}
+		/* clear value if nothing found */
+		hw->phy.mdio.prtad = 0;
 	} else {
 		status = 0;
 	}


             reply	other threads:[~2009-07-02 22:50 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-02 22:50 Jeff Kirsher [this message]
2009-07-02 22:50 ` [net-2.6 PATCH 2/4] ixgbe: fix regression on some 82598 adapters Jeff Kirsher
2009-07-04  2:12   ` David Miller
2009-07-02 22:50 ` [net-2.6 PATCH 3/4] ixgbe: fix inconsistent SFP/SFP+ failure results Jeff Kirsher
2009-07-04  2:12   ` David Miller
2009-07-02 22:51 ` [net-2.6 PATCH 4/4] ixgbe: Not allow 8259x unsupported wol options change from ethtool Jeff Kirsher
2009-07-04  2:12   ` David Miller
2009-07-04  2:12 ` [net-2.6 PATCH 1/4] ixgbe: fix issues with failing to detect insert of unsupported module David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090702225012.22746.57218.stgit@localhost.localdomain \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=davem@davemloft.net \
    --cc=donald.c.skidmore@intel.com \
    --cc=gospo@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).