netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Dave Jones <davej@redhat.com>
To: netdev@vger.kernel.org
Subject: [1/4 v2] Remove unused zero-copy code from velocity NIC driver.
Date: Tue, 21 Jul 2009 19:28:37 +0000 (UTC)
Date: Tue Jul 21 15:15:49 2009 -0400	[thread overview]
Message-ID: <200907211928.n6LJSLbe004367@gelk.kernelslacker.org> (raw)

This code hasn't been enabled in forever.

Signed-off-by: Dave Jones <davej@redhat.com>
---
 drivers/net/via-velocity.c |   77 ++++++-------------------------------------
 1 files changed, 11 insertions(+), 66 deletions(-)

diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c
index 42365e5..4ebe2ca 100644
--- a/drivers/net/via-velocity.c
+++ b/drivers/net/via-velocity.c
@@ -976,9 +976,6 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
 	dev->netdev_ops = &velocity_netdev_ops;
 	dev->ethtool_ops = &velocity_ethtool_ops;
 
-#ifdef  VELOCITY_ZERO_COPY_SUPPORT
-	dev->features |= NETIF_F_SG;
-#endif
 	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
 		NETIF_F_HW_VLAN_RX;
 
@@ -1849,11 +1846,7 @@ static void velocity_free_tx_buf(struct velocity_info *vptr, struct velocity_td_
 
 		pktlen = max_t(unsigned int, skb->len, ETH_ZLEN);
 		for (i = 0; i < tdinfo->nskb_dma; i++) {
-#ifdef VELOCITY_ZERO_COPY_SUPPORT
-			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], le16_to_cpu(td->tdesc1.len), PCI_DMA_TODEVICE);
-#else
 			pci_unmap_single(vptr->pdev, tdinfo->skb_dma[i], pktlen, PCI_DMA_TODEVICE);
-#endif
 			tdinfo->skb_dma[i] = 0;
 		}
 	}
@@ -2095,13 +2088,6 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	len = cpu_to_le16(pktlen);
 
-#ifdef VELOCITY_ZERO_COPY_SUPPORT
-	if (skb_shinfo(skb)->nr_frags > 6 && __skb_linearize(skb)) {
-		kfree_skb(skb);
-		return NETDEV_TX_OK;
-	}
-#endif
-
 	spin_lock_irqsave(&vptr->lock, flags);
 
 	index = vptr->tx.curr[qnum];
@@ -2111,59 +2097,18 @@ static int velocity_xmit(struct sk_buff *skb, struct net_device *dev)
 	td_ptr->tdesc1.TCR = TCR0_TIC;
 	td_ptr->td_buf[0].size &= ~TD_QUEUE;
 
-#ifdef VELOCITY_ZERO_COPY_SUPPORT
-	if (skb_shinfo(skb)->nr_frags > 0) {
-		int nfrags = skb_shinfo(skb)->nr_frags;
-		tdinfo->skb = skb;
-		if (nfrags > 6) {
-			skb_copy_from_linear_data(skb, tdinfo->buf, skb->len);
-			tdinfo->skb_dma[0] = tdinfo->buf_dma;
-			td_ptr->tdesc0.len = len;
-			td_ptr->tx.buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-			td_ptr->tx.buf[0].pa_high = 0;
-			td_ptr->tx.buf[0].size = len;	/* queue is 0 anyway */
-			tdinfo->nskb_dma = 1;
-		} else {
-			int i = 0;
-			tdinfo->nskb_dma = 0;
-			tdinfo->skb_dma[i] = pci_map_single(vptr->pdev, skb->data,
-						skb_headlen(skb), PCI_DMA_TODEVICE);
-
-			td_ptr->tdesc0.len = len;
-
-			/* FIXME: support 48bit DMA later */
-			td_ptr->tx.buf[i].pa_low = cpu_to_le32(tdinfo->skb_dma);
-			td_ptr->tx.buf[i].pa_high = 0;
-			td_ptr->tx.buf[i].size = cpu_to_le16(skb_headlen(skb));
-
-			for (i = 0; i < nfrags; i++) {
-				skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
-				void *addr = (void *)page_address(frag->page) + frag->page_offset;
-
-				tdinfo->skb_dma[i + 1] = pci_map_single(vptr->pdev, addr, frag->size, PCI_DMA_TODEVICE);
-
-				td_ptr->tx.buf[i + 1].pa_low = cpu_to_le32(tdinfo->skb_dma[i + 1]);
-				td_ptr->tx.buf[i + 1].pa_high = 0;
-				td_ptr->tx.buf[i + 1].size = cpu_to_le16(frag->size);
-			}
-			tdinfo->nskb_dma = i - 1;
-		}
+	/*
+	 *	Map the linear network buffer into PCI space and
+	 *	add it to the transmit ring.
+	 */
+	tdinfo->skb = skb;
+	tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
+	td_ptr->tdesc0.len = len;
+	td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
+	td_ptr->td_buf[0].pa_high = 0;
+	td_ptr->td_buf[0].size = len;
+	tdinfo->nskb_dma = 1;
 
-	} else
-#endif
-	{
-		/*
-		 *	Map the linear network buffer into PCI space and
-		 *	add it to the transmit ring.
-		 */
-		tdinfo->skb = skb;
-		tdinfo->skb_dma[0] = pci_map_single(vptr->pdev, skb->data, pktlen, PCI_DMA_TODEVICE);
-		td_ptr->tdesc0.len = len;
-		td_ptr->td_buf[0].pa_low = cpu_to_le32(tdinfo->skb_dma[0]);
-		td_ptr->td_buf[0].pa_high = 0;
-		td_ptr->td_buf[0].size = len;
-		tdinfo->nskb_dma = 1;
-	}
 	td_ptr->tdesc1.cmd = TCPLS_NORMAL + (tdinfo->nskb_dma + 1) * 16;
 
 	if (vptr->vlgrp && vlan_tx_tag_present(skb)) {

             reply	other threads:[~2009-07-21 19:28 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-07-21 19:28 Dave Jones [this message]
2009-07-21 19:32 ` [1/4 v2] Remove unused zero-copy code from velocity NIC driver David Miller
2009-07-21 19:32   ` David Miller
2009-07-21 19:33     ` David Miller
2009-07-21 19:44       ` Dave Jones
2009-07-23 22:58       ` David Miller
2009-07-24  0:44         ` Dave Jones
2009-07-24  2:02           ` David Miller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200907211928.n6LJSLbe004367@gelk.kernelslacker.org \
    --to=davej@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).