From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Rafael J. Wysocki" Subject: [PATCH] NET / skge: Enable WoL by default if supported Date: Wed, 22 Jul 2009 14:58:55 +0200 Message-ID: <200907221458.55616.rjw@sisk.pl> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Cc: netdev@vger.kernel.org, pm list , Michael Guntsche , LKML To: Stephen Hemminger Return-path: Content-Disposition: inline List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-pm-bounces@lists.linux-foundation.org Errors-To: linux-pm-bounces@lists.linux-foundation.org List-Id: netdev.vger.kernel.org From: Rafael J. Wysocki If skge hardware is capable of waking up the system from sleep, enable magic packet WoL during driver initialisation. This makes WoL work without calling 'ethtool -s ethX wol g' for each adapter. Signed-off-by: Rafael J. Wysocki Tested-by: Michael Guntsche --- drivers/net/skge.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) Index: linux-2.6/drivers/net/skge.c =================================================================== --- linux-2.6.orig/drivers/net/skge.c +++ linux-2.6/drivers/net/skge.c @@ -3856,8 +3856,10 @@ static struct net_device *skge_devinit(s skge->speed = -1; skge->advertising = skge_supported_modes(hw); - if (device_may_wakeup(&hw->pdev->dev)) + if (device_can_wakeup(&hw->pdev->dev)) { skge->wol = wol_supported(hw) & WAKE_MAGIC; + device_set_wakeup_enable(&hw->pdev->dev, skge->wol); + } hw->dev[port] = dev;