From: Phil Sutter <n0-1@freewrt.org>
To: netdev@vger.kernel.org
Cc: Andrew Morton <akpm@linux-foundation.org>,
"David S. Miller" <davem@davemloft.net>,
florian@openwrt.org, Roel Kluin <roel.kluin@gmail.com>
Subject: [PATCH 1/3] korina: fix printk formatting, add final info line
Date: Sun, 9 Aug 2009 02:06:26 +0200 [thread overview]
Message-ID: <20090809000635.636254CEAA@orbit.nwl.cc> (raw)
In-Reply-To: <1249776388-4626-1-git-send-email-n0-1@freewrt.org>
The macro DRV_NAME contains "korina", the field dev->name points to the
actual interface name. So messages were formerly prefixed with
'korinaeth2:' (on my system).
Signed-off-by: Phil Sutter <n0-1@freewrt.org>
---
drivers/net/korina.c | 31 ++++++++++++++++---------------
1 files changed, 16 insertions(+), 15 deletions(-)
diff --git a/drivers/net/korina.c b/drivers/net/korina.c
index a2701f5..c09e2ce 100644
--- a/drivers/net/korina.c
+++ b/drivers/net/korina.c
@@ -337,7 +337,7 @@ static irqreturn_t korina_rx_dma_interrupt(int irq, void *dev_id)
napi_schedule(&lp->napi);
if (dmas & DMA_STAT_ERR)
- printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
+ printk(KERN_ERR "%s: DMA error\n", dev->name);
retval = IRQ_HANDLED;
} else
@@ -555,7 +555,7 @@ static void korina_tx(struct net_device *dev)
dev->stats.tx_dropped++;
/* Should never happen */
- printk(KERN_ERR DRV_NAME "%s: split tx ignored\n",
+ printk(KERN_ERR "%s: split tx ignored\n",
dev->name);
} else if (devcs & ETH_TX_TOK) {
dev->stats.tx_packets++;
@@ -641,7 +641,7 @@ korina_tx_dma_interrupt(int irq, void *dev_id)
dev->trans_start = jiffies;
}
if (dmas & DMA_STAT_ERR)
- printk(KERN_ERR DRV_NAME "%s: DMA error\n", dev->name);
+ printk(KERN_ERR "%s: DMA error\n", dev->name);
retval = IRQ_HANDLED;
} else
@@ -909,8 +909,7 @@ static int korina_restart(struct net_device *dev)
ret = korina_init(dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME "%s: cannot restart device\n",
- dev->name);
+ printk(KERN_ERR "%s: cannot restart device\n", dev->name);
return ret;
}
korina_multicast_list(dev);
@@ -997,7 +996,7 @@ static int korina_open(struct net_device *dev)
/* Initialize */
ret = korina_init(dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME "%s: cannot open device\n", dev->name);
+ printk(KERN_ERR "%s: cannot open device\n", dev->name);
goto out;
}
@@ -1007,14 +1006,14 @@ static int korina_open(struct net_device *dev)
ret = request_irq(lp->rx_irq, &korina_rx_dma_interrupt,
IRQF_DISABLED, "Korina ethernet Rx", dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME "%s: unable to get Rx DMA IRQ %d\n",
+ printk(KERN_ERR "%s: unable to get Rx DMA IRQ %d\n",
dev->name, lp->rx_irq);
goto err_release;
}
ret = request_irq(lp->tx_irq, &korina_tx_dma_interrupt,
IRQF_DISABLED, "Korina ethernet Tx", dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME "%s: unable to get Tx DMA IRQ %d\n",
+ printk(KERN_ERR "%s: unable to get Tx DMA IRQ %d\n",
dev->name, lp->tx_irq);
goto err_free_rx_irq;
}
@@ -1023,7 +1022,7 @@ static int korina_open(struct net_device *dev)
ret = request_irq(lp->ovr_irq, &korina_ovr_interrupt,
IRQF_DISABLED, "Ethernet Overflow", dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME"%s: unable to get OVR IRQ %d\n",
+ printk(KERN_ERR "%s: unable to get OVR IRQ %d\n",
dev->name, lp->ovr_irq);
goto err_free_tx_irq;
}
@@ -1032,7 +1031,7 @@ static int korina_open(struct net_device *dev)
ret = request_irq(lp->und_irq, &korina_und_interrupt,
IRQF_DISABLED, "Ethernet Underflow", dev);
if (ret < 0) {
- printk(KERN_ERR DRV_NAME "%s: unable to get UND IRQ %d\n",
+ printk(KERN_ERR "%s: unable to get UND IRQ %d\n",
dev->name, lp->und_irq);
goto err_free_ovr_irq;
}
@@ -1111,7 +1110,7 @@ static int korina_probe(struct platform_device *pdev)
dev->base_addr = r->start;
lp->eth_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->eth_regs) {
- printk(KERN_ERR DRV_NAME "cannot remap registers\n");
+ printk(KERN_ERR DRV_NAME ": cannot remap registers\n");
rc = -ENXIO;
goto probe_err_out;
}
@@ -1119,7 +1118,7 @@ static int korina_probe(struct platform_device *pdev)
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_rx");
lp->rx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->rx_dma_regs) {
- printk(KERN_ERR DRV_NAME "cannot remap Rx DMA registers\n");
+ printk(KERN_ERR DRV_NAME ": cannot remap Rx DMA registers\n");
rc = -ENXIO;
goto probe_err_dma_rx;
}
@@ -1127,14 +1126,14 @@ static int korina_probe(struct platform_device *pdev)
r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_tx");
lp->tx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->tx_dma_regs) {
- printk(KERN_ERR DRV_NAME "cannot remap Tx DMA registers\n");
+ printk(KERN_ERR DRV_NAME ": cannot remap Tx DMA registers\n");
rc = -ENXIO;
goto probe_err_dma_tx;
}
lp->td_ring = kmalloc(TD_RING_SIZE + RD_RING_SIZE, GFP_KERNEL);
if (!lp->td_ring) {
- printk(KERN_ERR DRV_NAME "cannot allocate descriptors\n");
+ printk(KERN_ERR DRV_NAME ": cannot allocate descriptors\n");
rc = -ENXIO;
goto probe_err_td_ring;
}
@@ -1175,9 +1174,11 @@ static int korina_probe(struct platform_device *pdev)
rc = register_netdev(dev);
if (rc < 0) {
printk(KERN_ERR DRV_NAME
- ": cannot register net device %d\n", rc);
+ ": cannot register net device: %d\n", rc);
goto probe_err_register;
}
+ printk(KERN_INFO "%s: " DRV_NAME "-" DRV_VERSION " " DRV_RELDATE "\n",
+ dev->name);
out:
return rc;
--
1.6.0.6
next prev parent reply other threads:[~2009-08-09 0:06 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-07 15:33 [PATCH] korina: Read buffer overflow Roel Kluin
2009-08-08 0:48 ` Phil Sutter
2009-08-08 13:14 ` roel kluin
2009-08-08 16:45 ` Phil Sutter
2009-08-09 0:06 ` Phil Sutter
2009-08-12 22:15 ` Phil Sutter
2009-08-12 22:22 ` [PATCH 1/2] korina: fix printk formatting, add final info line Phil Sutter
2009-08-12 22:52 ` [PATCH 2/2] korina: add error-handling to korina_alloc_ring Phil Sutter
2009-08-13 23:27 ` David Miller
2009-08-13 23:27 ` [PATCH 1/2] korina: fix printk formatting, add final info line David Miller
[not found] ` <1249776388-4626-1-git-send-email-n0-1@freewrt.org>
2009-08-09 0:06 ` Phil Sutter [this message]
[not found] ` <1249776388-4626-2-git-send-email-n0-1@freewrt.org>
2009-08-09 0:06 ` [PATCH 2/3] korina: add error-handling to korina_alloc_ring Phil Sutter
[not found] ` <1249776388-4626-3-git-send-email-n0-1@freewrt.org>
2009-08-09 0:06 ` [PATCH 3/3] korina: convert to net_device_ops Phil Sutter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090809000635.636254CEAA@orbit.nwl.cc \
--to=n0-1@freewrt.org \
--cc=akpm@linux-foundation.org \
--cc=davem@davemloft.net \
--cc=florian@openwrt.org \
--cc=netdev@vger.kernel.org \
--cc=roel.kluin@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).