[PATCH 3/9] sky2: Reset tx train after interrupts disabled.

[Stephen Hemminger <shemminger@vyatta.com>]

[-- Attachment #1: sky2-tx3.patch --]
[-- Type: text/plain, Size: 1532 bytes --]

From:	Mike McCormack <mikem@ring3k.org>

Reseting the tx chain too soon results in invalid tx queue positions
being delivered in the status queue.  This also makes sure there's no
overlap between the cleanup done by sky2_tx_clean() and
sky2_tx_done().

Signed-off-by: Mike McCormack <mikem@ring3k.org>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>

---
 drivers/net/sky2.c |    4 ++--
 1 files changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/sky2.c	2009-08-14 07:58:44.833439109 -0700
+++ b/drivers/net/sky2.c	2009-08-14 07:58:45.736296852 -0700
@@ -1804,11 +1804,8 @@ static void sky2_tx_clean(struct net_dev
 	netif_tx_unlock_bh(dev);
 }
 
-static void sky2_tx_reset(struct sky2_port* sky2)
+static void sky2_tx_reset(struct sky2_hw *hw, unsigned port)
 {
-	unsigned port = sky2->port;
-	struct sky2_hw *hw = sky2->hw;
-
 	/* Disable Force Sync bit and Enable Alloc bit */
 	sky2_write8(hw, SK_REG(port, TXA_CTRL),
 		    TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
@@ -1866,8 +1863,6 @@ static int sky2_down(struct net_device *
 	      && port == 0 && hw->dev[1] && netif_running(hw->dev[1])))
 		sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_SET);
 
-	sky2_tx_reset(sky2);
-
 	sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
 
 	/* Force any delayed status interrrupt and NAPI */
@@ -1892,6 +1887,8 @@ static int sky2_down(struct net_device *
 	/* turn off LED's */
 	sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
 
+	sky2_tx_reset(hw, port);
+
 	sky2_tx_clean(dev);
 	sky2_rx_clean(sky2);
 

--