From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
Yi Zou <yi.zou@intel.com>,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next PATCH 4/8] dcbnl: Add support for setapp/getapp commands to dcbnl
Date: Mon, 31 Aug 2009 15:32:34 -0700 [thread overview]
Message-ID: <20090831223234.30995.75956.stgit@localhost.localdomain> (raw)
In-Reply-To: <20090831223110.30995.61162.stgit@localhost.localdomain>
From: Yi Zou <yi.zou@intel.com>
This patch adds dcbnl command definitions to support setapp/getapp
functionality from the IEEE 802.1Qaz Data Center Bridging Capability
Exchange protocol (DCBX) specification. Section 3.3 defines the
application protocol and its 802.1p user priority in DCBX, which is
implemented here as a pair of setapp/getapp commands in the kernel
dcbnl for setting and retrieving the user priority for an given
application protocol. The protocol is identified by the combination of
an id and an idtype. Currently, when idtype is 0, the corresponding
id gives the ether type of this protocol, e.g., for FCoE, it will be
0x8906; when idtype is 1, then the corresponding id gives the TCP or
UDP port number.
For more information regarding DCBX spec., please refer to the following:
http://www.ieee802.org/1/files/public/docs2008/
az-wadekar-dcbx-capability-exchange-discovery-protocol-1108-v1.01.pdf
Signed-off-by: Yi Zou <yi.zou@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
include/linux/dcbnl.h | 18 ++++++++++++++++++
1 files changed, 18 insertions(+), 0 deletions(-)
diff --git a/include/linux/dcbnl.h b/include/linux/dcbnl.h
index 7d2e100..b7cdbb4 100644
--- a/include/linux/dcbnl.h
+++ b/include/linux/dcbnl.h
@@ -50,6 +50,8 @@ struct dcbmsg {
* @DCB_CMD_SNUMTCS: set the number of traffic classes
* @DCB_CMD_GBCN: set backward congestion notification configuration
* @DCB_CMD_SBCN: get backward congestion notification configration.
+ * @DCB_CMD_GAPP: get application protocol configuration
+ * @DCB_CMD_SAPP: set application protocol configuration
*/
enum dcbnl_commands {
DCB_CMD_UNDEFINED,
@@ -80,6 +82,9 @@ enum dcbnl_commands {
DCB_CMD_BCN_GCFG,
DCB_CMD_BCN_SCFG,
+ DCB_CMD_GAPP,
+ DCB_CMD_SAPP,
+
__DCB_CMD_ENUM_MAX,
DCB_CMD_MAX = __DCB_CMD_ENUM_MAX - 1,
};
@@ -114,6 +119,7 @@ enum dcbnl_attrs {
DCB_ATTR_CAP,
DCB_ATTR_NUMTCS,
DCB_ATTR_BCN,
+ DCB_ATTR_APP,
__DCB_ATTR_ENUM_MAX,
DCB_ATTR_MAX = __DCB_ATTR_ENUM_MAX - 1,
@@ -338,5 +344,17 @@ enum dcb_general_attr_values {
DCB_ATTR_VALUE_UNDEFINED = 0xff
};
+#define DCB_APP_IDTYPE_ETHTYPE 0x00
+#define DCB_APP_IDTYPE_PORTNUM 0x01
+enum dcbnl_app_attrs {
+ DCB_APP_ATTR_UNDEFINED,
+
+ DCB_APP_ATTR_IDTYPE,
+ DCB_APP_ATTR_ID,
+ DCB_APP_ATTR_PRIORITY,
+
+ __DCB_APP_ATTR_ENUM_MAX,
+ DCB_APP_ATTR_MAX = __DCB_APP_ATTR_ENUM_MAX - 1,
+};
#endif /* __LINUX_DCBNL_H__ */
next prev parent reply other threads:[~2009-08-31 22:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-08-31 22:31 [net-next PATCH 1/8] net: Add ndo_fcoe_enable/ndo_fcoe_disable to net_device_ops Jeff Kirsher
2009-08-31 22:31 ` [net-next PATCH 2/8] vlan: Add support for net_devices_ops.ndo_fcoe_enable/_disable to VLAN Jeff Kirsher
2009-08-31 22:32 ` [net-next PATCH 3/8] ixgbe: Add support for the net_device_ops.ndo_fcoe_enable/disable to 82599 Jeff Kirsher
2009-08-31 22:32 ` Jeff Kirsher [this message]
2009-08-31 22:32 ` [net-next PATCH 5/8] dcbnl: Add support for setapp/getapp to netdev dcbnl_rtnl_ops Jeff Kirsher
2009-08-31 22:33 ` [net-next PATCH 6/8] dcbnl: Add netlink attributes for setapp/getapp to dcbnl Jeff Kirsher
2009-08-31 22:33 ` [net-next PATCH 7/8] dcbnl: Add implementations of dcbnl setapp/getapp commands Jeff Kirsher
2009-08-31 22:34 ` [net-next PATCH 8/8] ixgbe: Add support for dcbnl_rtnl_ops.setapp/getapp Jeff Kirsher
2009-09-01 8:28 ` [net-next PATCH 1/8] net: Add ndo_fcoe_enable/ndo_fcoe_disable to net_device_ops David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090831223234.30995.75956.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=peter.p.waskiewicz.jr@intel.com \
--cc=yi.zou@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox