* [PATCH 2/9] pcmcia: use pre-determined values [not found] <1255907255-28297-1-git-send-email-linux@dominikbrodowski.net> @ 2009-10-18 23:07 ` Dominik Brodowski 2009-10-18 23:07 ` [PATCH 3/9] pcmcia: use pcmcia_loop_config in misc pcmcia drivers Dominik Brodowski 2009-10-27 19:28 ` [PATCH 2/9] pcmcia: use pre-determined values John W. Linville 0 siblings, 2 replies; 6+ messages in thread From: Dominik Brodowski @ 2009-10-18 23:07 UTC (permalink / raw) To: linux-pcmcia Cc: Dominik Brodowski, David S. Miller, John W. Linville, netdev, linux-wireless A few PCMCIA network drivers can make use of values provided by the pcmcia core, instead of tedious, independent CIS parsing. xirc32ps_cs.c: manf_id hostap_cs.c: multifunction count b43/pcmcia.c: ConfigBase address and "Present" smc91c92_cs.c: By default, mhz_setup() can use VERS_1 as it is stored in struct pcmcia_device. Only some cards require workarounds, such as reading out VERS_1 twice. CC: David S. Miller <davem@davemloft.net> CC: John W. Linville <linville@tuxdriver.com> CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> --- drivers/net/pcmcia/smc91c92_cs.c | 11 +++++++++-- drivers/net/pcmcia/xirc2ps_cs.c | 5 ++--- drivers/net/wireless/b43/pcmcia.c | 20 -------------------- drivers/net/wireless/hostap/hostap_cs.c | 21 +-------------------- 4 files changed, 12 insertions(+), 45 deletions(-) diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index 7bde2cd..af03759 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -545,6 +545,14 @@ static int mhz_setup(struct pcmcia_device *link) u_char *buf, *station_addr; int rc; + /* Read the station address from the CIS. It is stored as the last + (fourth) string in the Version 1 Version/ID tuple. */ + if ((link->prod_id[3]) && + (cvt_ascii_address(dev, link->prod_id[3]) == 0)) + return 0; + + /* Workarounds for broken cards start here. */ + cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL); if (!cfg_mem) return -1; @@ -557,8 +565,7 @@ static int mhz_setup(struct pcmcia_device *link) tuple->TupleData = (cisdata_t *)buf; tuple->TupleDataMax = 255; - /* Read the station address from the CIS. It is stored as the last - (fourth) string in the Version 1 Version/ID tuple. */ + /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */ tuple->DesiredTuple = CISTPL_VERS_1; if (first_tuple(link, tuple, parse) != 0) { rc = -1; diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index cf84231..3dd6ba6 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -792,13 +792,12 @@ xirc2ps_config(struct pcmcia_device * link) tuple.TupleOffset = 0; /* Is this a valid card */ - tuple.DesiredTuple = CISTPL_MANFID; - if ((err=first_tuple(link, &tuple, &parse))) { + if (link->has_manf_id == 0) { printk(KNOT_XIRC "manfid not found in CIS\n"); goto failure; } - switch(parse.manfid.manf) { + switch (link->manf_id) { case MANFID_XIRCOM: local->manf_str = "Xircom"; break; diff --git a/drivers/net/wireless/b43/pcmcia.c b/drivers/net/wireless/b43/pcmcia.c index 6c3a749..cd14b7e 100644 --- a/drivers/net/wireless/b43/pcmcia.c +++ b/drivers/net/wireless/b43/pcmcia.c @@ -65,35 +65,15 @@ static int __devinit b43_pcmcia_probe(struct pcmcia_device *dev) struct ssb_bus *ssb; win_req_t win; memreq_t mem; - tuple_t tuple; - cisparse_t parse; int err = -ENOMEM; int res = 0; - unsigned char buf[64]; ssb = kzalloc(sizeof(*ssb), GFP_KERNEL); if (!ssb) goto out_error; err = -ENODEV; - tuple.DesiredTuple = CISTPL_CONFIG; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - res = pcmcia_get_first_tuple(dev, &tuple); - if (res != 0) - goto err_kfree_ssb; - res = pcmcia_get_tuple_data(dev, &tuple); - if (res != 0) - goto err_kfree_ssb; - res = pcmcia_parse_tuple(&tuple, &parse); - if (res != 0) - goto err_kfree_ssb; - - dev->conf.ConfigBase = parse.config.base; - dev->conf.Present = parse.config.rmask[0]; dev->conf.Attributes = CONF_ENABLE_IRQ; dev->conf.IntType = INT_MEMORY_AND_IO; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ad8eab4..31b60dd 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -274,9 +274,6 @@ static int sandisk_enable_wireless(struct net_device *dev) conf_reg_t reg; struct hostap_interface *iface = netdev_priv(dev); local_info_t *local = iface->local; - tuple_t tuple; - cisparse_t *parse = NULL; - u_char buf[64]; struct hostap_cs_priv *hw_priv = local->hw_priv; if (hw_priv->link->io.NumPorts1 < 0x42) { @@ -285,28 +282,13 @@ static int sandisk_enable_wireless(struct net_device *dev) goto done; } - parse = kmalloc(sizeof(cisparse_t), GFP_KERNEL); - if (parse == NULL) { - ret = -ENOMEM; - goto done; - } - - tuple.Attributes = TUPLE_RETURN_COMMON; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - if (hw_priv->link->manf_id != 0xd601 || hw_priv->link->card_id != 0x0101) { /* No SanDisk manfid found */ ret = -ENODEV; goto done; } - tuple.DesiredTuple = CISTPL_LONGLINK_MFC; - if (pcmcia_get_first_tuple(hw_priv->link, &tuple) || - pcmcia_get_tuple_data(hw_priv->link, &tuple) || - pcmcia_parse_tuple(&tuple, parse) || - parse->longlink_mfc.nfn < 2) { + if (hw_priv->link->socket->functions < 2) { /* No multi-function links found */ ret = -ENODEV; goto done; @@ -354,7 +336,6 @@ static int sandisk_enable_wireless(struct net_device *dev) udelay(10); done: - kfree(parse); return ret; } -- 1.6.0.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* [PATCH 3/9] pcmcia: use pcmcia_loop_config in misc pcmcia drivers 2009-10-18 23:07 ` [PATCH 2/9] pcmcia: use pre-determined values Dominik Brodowski @ 2009-10-18 23:07 ` Dominik Brodowski [not found] ` <1255907255-28297-4-git-send-email-linux@dominikbrodowski.net> ` (2 more replies) 2009-10-27 19:28 ` [PATCH 2/9] pcmcia: use pre-determined values John W. Linville 1 sibling, 3 replies; 6+ messages in thread From: Dominik Brodowski @ 2009-10-18 23:07 UTC (permalink / raw) To: linux-pcmcia Cc: Dominik Brodowski, David S. Miller, John W. Linville, Jiri Kosina, David Sterba, netdev, linux-wireless Use pcmcia_loop_config() in a few drivers missed during the first round. On fmvj18x_cs.c it -- strangely -- only requries us to set conf.ConfigIndex, which is done by the core, so include an empty loop function which returns 0 unconditionally. CC: David S. Miller <davem@davemloft.net> CC: John W. Linville <linville@tuxdriver.com> CC: Jiri Kosina <jkosina@suse.cz> CC: David Sterba <dsterba@suse.cz> CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> --- drivers/char/pcmcia/ipwireless/main.c | 103 +++++++-------------------------- drivers/char/pcmcia/synclink_cs.c | 64 ++++++++------------- drivers/net/pcmcia/fmvj18x_cs.c | 22 +++++-- drivers/net/wireless/libertas/if_cs.c | 67 +++++++++------------- 4 files changed, 88 insertions(+), 168 deletions(-) diff --git a/drivers/char/pcmcia/ipwireless/main.c b/drivers/char/pcmcia/ipwireless/main.c index 5216fce..263a18f 100644 --- a/drivers/char/pcmcia/ipwireless/main.c +++ b/drivers/char/pcmcia/ipwireless/main.c @@ -79,14 +79,32 @@ static void signalled_reboot_callback(void *callback_data) schedule_work(&ipw->work_reboot); } +static int ipwireless_ioprobe(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + p_dev->io.IOAddrLines = 16; + + p_dev->irq.IRQInfo1 = cfg->irq.IRQInfo1; + + /* 0x40 causes it to generate level mode interrupts. */ + /* 0x04 enables IREQ pin. */ + p_dev->conf.ConfigIndex = cfg->index | 0x44; + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int config_ipwireless(struct ipw_dev *ipw) { struct pcmcia_device *link = ipw->link; - int ret; + int ret = 0; tuple_t tuple; unsigned short buf[64]; cisparse_t parse; - unsigned short cor_value; memreq_t memreq_attr_memory; memreq_t memreq_common_memory; @@ -97,103 +115,26 @@ static int config_ipwireless(struct ipw_dev *ipw) tuple.TupleDataMax = sizeof(buf); tuple.TupleOffset = 0; - tuple.DesiredTuple = RETURN_FIRST_TUPLE; - - ret = pcmcia_get_first_tuple(link, &tuple); - - while (ret == 0) { - ret = pcmcia_get_tuple_data(link, &tuple); - - if (ret != 0) { - cs_error(link, GetTupleData, ret); - goto exit0; - } - ret = pcmcia_get_next_tuple(link, &tuple); - } - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - - ret = pcmcia_get_first_tuple(link, &tuple); - - if (ret != 0) { - cs_error(link, GetFirstTuple, ret); - goto exit0; - } - - ret = pcmcia_get_tuple_data(link, &tuple); - - if (ret != 0) { - cs_error(link, GetTupleData, ret); - goto exit0; - } - - ret = pcmcia_parse_tuple(&tuple, &parse); - - if (ret != 0) { - cs_error(link, ParseTuple, ret); - goto exit0; - } - - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - link->io.BasePort1 = parse.cftable_entry.io.win[0].base; - link->io.NumPorts1 = parse.cftable_entry.io.win[0].len; - link->io.IOAddrLines = 16; - - link->irq.IRQInfo1 = parse.cftable_entry.irq.IRQInfo1; - - /* 0x40 causes it to generate level mode interrupts. */ - /* 0x04 enables IREQ pin. */ - cor_value = parse.cftable_entry.index | 0x44; - link->conf.ConfigIndex = cor_value; - - /* IRQ and I/O settings */ - tuple.DesiredTuple = CISTPL_CONFIG; - - ret = pcmcia_get_first_tuple(link, &tuple); - + ret = pcmcia_loop_config(link, ipwireless_ioprobe, NULL); if (ret != 0) { - cs_error(link, GetFirstTuple, ret); - goto exit0; - } - - ret = pcmcia_get_tuple_data(link, &tuple); - - if (ret != 0) { - cs_error(link, GetTupleData, ret); + cs_error(link, RequestIO, ret); goto exit0; } - ret = pcmcia_parse_tuple(&tuple, &parse); - - if (ret != 0) { - cs_error(link, GetTupleData, ret); - goto exit0; - } link->conf.Attributes = CONF_ENABLE_IRQ; - link->conf.ConfigBase = parse.config.base; - link->conf.Present = parse.config.rmask[0]; link->conf.IntType = INT_MEMORY_AND_IO; link->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT; link->irq.Handler = ipwireless_interrupt; link->irq.Instance = ipw->hardware; - ret = pcmcia_request_io(link, &link->io); - - if (ret != 0) { - cs_error(link, RequestIO, ret); - goto exit0; - } - request_region(link->io.BasePort1, link->io.NumPorts1, IPWIRELESS_PCCARD_NAME); /* memory settings */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; ret = pcmcia_get_first_tuple(link, &tuple); - if (ret != 0) { cs_error(link, GetFirstTuple, ret); goto exit1; diff --git a/drivers/char/pcmcia/synclink_cs.c b/drivers/char/pcmcia/synclink_cs.c index caf6e4d..429b731 100644 --- a/drivers/char/pcmcia/synclink_cs.c +++ b/drivers/char/pcmcia/synclink_cs.c @@ -575,55 +575,39 @@ static int mgslpc_probe(struct pcmcia_device *link) #define CS_CHECK(fn, ret) \ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) +static int mgslpc_ioprobe(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + if (cfg->io.nwin > 0) { + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + if (!(cfg->io.flags & CISTPL_IO_8BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16; + if (!(cfg->io.flags & CISTPL_IO_16BIT)) + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + p_dev->io.IOAddrLines = cfg->io.flags & CISTPL_IO_LINES_MASK; + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + return pcmcia_request_io(p_dev, &p_dev->io); + } + return -ENODEV; +} + static int mgslpc_config(struct pcmcia_device *link) { MGSLPC_INFO *info = link->priv; - tuple_t tuple; - cisparse_t parse; - int last_fn, last_ret; - u_char buf[64]; - cistpl_cftable_entry_t dflt = { 0 }; - cistpl_cftable_entry_t *cfg; + int last_fn = RequestIO; + int last_ret; if (debug_level >= DEBUG_LEVEL_INFO) printk("mgslpc_config(0x%p)\n", link); - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - /* get CIS configuration entry */ - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - - cfg = &(parse.cftable_entry); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse)); - - if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg; - if (cfg->index == 0) + last_ret = pcmcia_loop_config(link, mgslpc_ioprobe, NULL); + if (last_ret != 0) goto cs_failed; - link->conf.ConfigIndex = cfg->index; - link->conf.Attributes |= CONF_ENABLE_IRQ; - - /* IO window settings */ - link->io.NumPorts1 = 0; - if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) { - cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io; - link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - if (!(io->flags & CISTPL_IO_8BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; - if (!(io->flags & CISTPL_IO_16BIT)) - link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; - link->io.IOAddrLines = io->flags & CISTPL_IO_LINES_MASK; - link->io.BasePort1 = io->win[0].base; - link->io.NumPorts1 = io->win[0].len; - CS_CHECK(RequestIO, pcmcia_request_io(link, &link->io)); - } - link->conf.Attributes = CONF_ENABLE_IRQ; link->conf.IntType = INT_MEMORY_AND_IO; link->conf.ConfigIndex = 8; diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 7e01fbd..c7a2bbf 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -341,14 +341,23 @@ static int ungermann_try_io_port(struct pcmcia_device *link) return ret; /* RequestIO failed */ } +static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + return 0; /* strange, but that's what the code did already before... */ +} + + static int fmvj18x_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; local_info_t *lp = netdev_priv(dev); tuple_t tuple; - cisparse_t parse; u_short buf[32]; - int i, last_fn = 0, last_ret = 0, ret; + int i, last_fn = RequestIO, last_ret = 0, ret; unsigned int ioaddr; cardtype_t cardtype; char *card_name = "unknown"; @@ -362,12 +371,11 @@ static int fmvj18x_config(struct pcmcia_device *link) tuple.DesiredTuple = CISTPL_FUNCE; tuple.TupleOffset = 0; if (pcmcia_get_first_tuple(link, &tuple) == 0) { + last_ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL); + if (last_ret != 0) + goto cs_failed; + /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */ - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - CS_CHECK(ParseTuple, pcmcia_parse_tuple(&tuple, &parse)); - link->conf.ConfigIndex = parse.cftable_entry.index; switch (link->manf_id) { case MANFID_TDK: cardtype = TDK; diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c index 6238176..cb40c38 100644 --- a/drivers/net/wireless/libertas/if_cs.c +++ b/drivers/net/wireless/libertas/if_cs.c @@ -793,18 +793,37 @@ static void if_cs_release(struct pcmcia_device *p_dev) * configure the card at this point -- we wait until we receive a card * insertion event. */ + +static int if_cs_ioprobe(struct pcmcia_device *p_dev, + cistpl_cftable_entry_t *cfg, + cistpl_cftable_entry_t *dflt, + unsigned int vcc, + void *priv_data) +{ + p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; + p_dev->io.BasePort1 = cfg->io.win[0].base; + p_dev->io.NumPorts1 = cfg->io.win[0].len; + + /* Do we need to allocate an interrupt? */ + if (cfg->irq.IRQInfo1) + p_dev->conf.Attributes |= CONF_ENABLE_IRQ; + + /* IO window settings */ + if (cfg->io.nwin != 1) { + lbs_pr_err("wrong CIS (check number of IO windows)\n"); + return -ENODEV; + } + + /* This reserves IO space but doesn't actually enable it */ + return pcmcia_request_io(p_dev, &p_dev->io); +} + static int if_cs_probe(struct pcmcia_device *p_dev) { int ret = -ENOMEM; unsigned int prod_id; struct lbs_private *priv; struct if_cs_card *card; - /* CIS parsing */ - tuple_t tuple; - cisparse_t parse; - cistpl_cftable_entry_t *cfg = &parse.cftable_entry; - cistpl_io_t *io = &cfg->io; - u_char buf[64]; lbs_deb_enter(LBS_DEB_CS); @@ -823,43 +842,11 @@ static int if_cs_probe(struct pcmcia_device *p_dev) p_dev->conf.Attributes = 0; p_dev->conf.IntType = INT_MEMORY_AND_IO; - tuple.Attributes = 0; - tuple.TupleData = buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - - tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; - if ((ret = pcmcia_get_first_tuple(p_dev, &tuple)) != 0 || - (ret = pcmcia_get_tuple_data(p_dev, &tuple)) != 0 || - (ret = pcmcia_parse_tuple(&tuple, &parse)) != 0) - { - lbs_pr_err("error in pcmcia_get_first_tuple etc\n"); - goto out1; - } - - p_dev->conf.ConfigIndex = cfg->index; - - /* Do we need to allocate an interrupt? */ - if (cfg->irq.IRQInfo1) { - p_dev->conf.Attributes |= CONF_ENABLE_IRQ; - } - - /* IO window settings */ - if (cfg->io.nwin != 1) { - lbs_pr_err("wrong CIS (check number of IO windows)\n"); - ret = -ENODEV; + if (pcmcia_loop_config(p_dev, if_cs_ioprobe, NULL)) { + lbs_pr_err("error in pcmcia_loop_config\n"); goto out1; } - p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO; - p_dev->io.BasePort1 = io->win[0].base; - p_dev->io.NumPorts1 = io->win[0].len; - /* This reserves IO space but doesn't actually enable it */ - ret = pcmcia_request_io(p_dev, &p_dev->io); - if (ret) { - lbs_pr_err("error in pcmcia_request_io\n"); - goto out1; - } /* * Allocate an interrupt line. Note that this does not assign -- 1.6.0.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
[parent not found: <1255907255-28297-4-git-send-email-linux@dominikbrodowski.net>]
[parent not found: <1255907255-28297-5-git-send-email-linux@dominikbrodowski.net>]
* [PATCH 6/9] pcmcia: convert net pcmcia drivers to use new CIS helpers [not found] ` <1255907255-28297-5-git-send-email-linux@dominikbrodowski.net> @ 2009-10-18 23:07 ` Dominik Brodowski 0 siblings, 0 replies; 6+ messages in thread From: Dominik Brodowski @ 2009-10-18 23:07 UTC (permalink / raw) To: linux-pcmcia; +Cc: Dominik Brodowski, David S. Miller, netdev Use the new CIS helpers in net pcmcia drivers, which allows for a few code cleanups. CC: David S. Miller <davem@davemloft.net> CC: netdev@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> --- drivers/net/pcmcia/3c574_cs.c | 18 ++-- drivers/net/pcmcia/3c589_cs.c | 24 ++--- drivers/net/pcmcia/fmvj18x_cs.c | 51 ++++----- drivers/net/pcmcia/nmclan_cs.c | 19 ++-- drivers/net/pcmcia/smc91c92_cs.c | 238 +++++++++++--------------------------- drivers/net/pcmcia/xirc2ps_cs.c | 101 ++++++---------- 6 files changed, 154 insertions(+), 297 deletions(-) diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index b58965a..6449290 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -344,13 +344,13 @@ static int tc574_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct el3_private *lp = netdev_priv(dev); - tuple_t tuple; - __le16 buf[32]; int last_fn, last_ret, i, j; unsigned int ioaddr; __be16 *phys_addr; char *cardname; __u32 config; + u8 *buf; + size_t len; phys_addr = (__be16 *)dev->dev_addr; @@ -378,16 +378,14 @@ static int tc574_config(struct pcmcia_device *link) /* The 3c574 normally uses an EEPROM for configuration info, including the hardware address. The future products may include a modem chip and put the address in the CIS. */ - tuple.Attributes = 0; - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - tuple.DesiredTuple = 0x88; - if (pcmcia_get_first_tuple(link, &tuple) == 0) { - pcmcia_get_tuple_data(link, &tuple); + + len = pcmcia_get_tuple(link, 0x88, &buf); + if (buf && len >= 6) { for (i = 0; i < 3; i++) - phys_addr[i] = htons(le16_to_cpu(buf[i])); + phys_addr[i] = htons(le16_to_cpu(buf[i * 2])); + kfree(buf); } else { + kfree(buf); /* 0 < len < 6 */ EL3WINDOW(0); for (i = 0; i < 3; i++) phys_addr[i] = htons(read_eeprom(ioaddr, i + 10)); diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c index 569fb06..ea04356 100644 --- a/drivers/net/pcmcia/3c589_cs.c +++ b/drivers/net/pcmcia/3c589_cs.c @@ -256,22 +256,15 @@ static int tc589_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct el3_private *lp = netdev_priv(dev); - tuple_t tuple; - __le16 buf[32]; - __be16 *phys_addr; + __be16 *phys_addr = NULL; int last_fn, last_ret, i, j, multi = 0, fifo; unsigned int ioaddr; char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"}; + u8 *buf; + size_t len; DEBUG(0, "3c589_config(0x%p)\n", link); - phys_addr = (__be16 *)dev->dev_addr; - tuple.Attributes = 0; - tuple.TupleData = (cisdata_t *)buf; - tuple.TupleDataMax = sizeof(buf); - tuple.TupleOffset = 0; - tuple.Attributes = TUPLE_RETURN_COMMON; - /* Is this a 3c562? */ if (link->manf_id != MANFID_3COM) printk(KERN_INFO "3c589_cs: hmmm, is this really a " @@ -301,12 +294,13 @@ static int tc589_config(struct pcmcia_device *link) /* The 3c589 has an extra EEPROM for configuration info, including the hardware address. The 3c562 puts the address in the CIS. */ - tuple.DesiredTuple = 0x88; - if (pcmcia_get_first_tuple(link, &tuple) == 0) { - pcmcia_get_tuple_data(link, &tuple); - for (i = 0; i < 3; i++) - phys_addr[i] = htons(le16_to_cpu(buf[i])); + len = pcmcia_get_tuple(link, 0x88, &buf); + if (buf && len >= 6) { + for (i = 0; i < 3; i++) + phys_addr[i] = htons(le16_to_cpu(buf[i*2])); + kfree(buf); } else { + kfree(buf); /* 0 < len < 6 */ for (i = 0; i < 3; i++) phys_addr[i] = htons(read_eeprom(ioaddr, i)); if (phys_addr[0] == htons(0x6060)) { diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index c7a2bbf..58954a6 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -350,32 +350,30 @@ static int fmvj18x_ioprobe(struct pcmcia_device *p_dev, return 0; /* strange, but that's what the code did already before... */ } - static int fmvj18x_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; local_info_t *lp = netdev_priv(dev); - tuple_t tuple; - u_short buf[32]; int i, last_fn = RequestIO, last_ret = 0, ret; unsigned int ioaddr; cardtype_t cardtype; char *card_name = "unknown"; - u_char *node_id; + u8 *buf; + size_t len; + u_char buggybuf[32]; DEBUG(0, "fmvj18x_config(0x%p)\n", link); - tuple.TupleData = (u_char *)buf; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - tuple.DesiredTuple = CISTPL_FUNCE; - tuple.TupleOffset = 0; - if (pcmcia_get_first_tuple(link, &tuple) == 0) { + len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); + if (buf) + kfree(buf); + + if (len) { + /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */ last_ret = pcmcia_loop_config(link, fmvj18x_ioprobe, NULL); if (last_ret != 0) goto cs_failed; - /* Yes, I have CISTPL_FUNCE. Let's check CISTPL_MANFID */ switch (link->manf_id) { case MANFID_TDK: cardtype = TDK; @@ -482,21 +480,21 @@ static int fmvj18x_config(struct pcmcia_device *link) case CONTEC: case NEC: case KME: - tuple.DesiredTuple = CISTPL_FUNCE; - tuple.TupleOffset = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - tuple.TupleOffset = 0; - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); if (cardtype == MBH10304) { - /* MBH10304's CIS_FUNCE is corrupted */ - node_id = &(tuple.TupleData[5]); card_name = "FMV-J182"; - } else { - while (tuple.TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID ) { - CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(link, &tuple)); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); + + len = pcmcia_get_tuple(link, CISTPL_FUNCE, &buf); + if (len < 11) { + kfree(buf); + goto failed; } - node_id = &(tuple.TupleData[2]); + /* Read MACID from CIS */ + for (i = 5; i < 11; i++) + dev->dev_addr[i] = buf[i]; + kfree(buf); + } else { + if (pcmcia_get_mac_from_cis(link, dev)) + goto failed; if( cardtype == TDK ) { card_name = "TDK LAK-CD021"; } else if( cardtype == LA501 ) { @@ -509,9 +507,6 @@ static int fmvj18x_config(struct pcmcia_device *link) card_name = "C-NET(PC)C"; } } - /* Read MACID from CIS */ - for (i = 0; i < 6; i++) - dev->dev_addr[i] = node_id[i]; break; case UNGERMANN: /* Read MACID from register */ @@ -521,12 +516,12 @@ static int fmvj18x_config(struct pcmcia_device *link) break; case XXX10304: /* Read MACID from Buggy CIS */ - if (fmvj18x_get_hwinfo(link, tuple.TupleData) == -1) { + if (fmvj18x_get_hwinfo(link, buggybuf) == -1) { printk(KERN_NOTICE "fmvj18x_cs: unable to read hardware net address.\n"); goto failed; } for (i = 0 ; i < 6; i++) { - dev->dev_addr[i] = tuple.TupleData[i]; + dev->dev_addr[i] = buggybuf[i]; } card_name = "FMV-J182"; break; diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c index 5ed6339..4b96b35 100644 --- a/drivers/net/pcmcia/nmclan_cs.c +++ b/drivers/net/pcmcia/nmclan_cs.c @@ -661,8 +661,8 @@ static int nmclan_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; mace_private *lp = netdev_priv(dev); - tuple_t tuple; - u_char buf[64]; + u8 *buf; + size_t len; int i, last_ret, last_fn; unsigned int ioaddr; @@ -677,14 +677,13 @@ static int nmclan_config(struct pcmcia_device *link) ioaddr = dev->base_addr; /* Read the ethernet address from the CIS. */ - tuple.DesiredTuple = 0x80 /* CISTPL_CFTABLE_ENTRY_MISC */; - tuple.TupleData = buf; - tuple.TupleDataMax = 64; - tuple.TupleOffset = 0; - tuple.Attributes = 0; - CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(link, &tuple)); - CS_CHECK(GetTupleData, pcmcia_get_tuple_data(link, &tuple)); - memcpy(dev->dev_addr, tuple.TupleData, ETHER_ADDR_LEN); + len = pcmcia_get_tuple(link, 0x80, &buf); + if (!buf || len < ETHER_ADDR_LEN) { + kfree(buf); + goto failed; + } + memcpy(dev->dev_addr, buf, ETHER_ADDR_LEN); + kfree(buf); /* Verify configuration by reading the MACE ID. */ { diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c index af03759..df92bcd 100644 --- a/drivers/net/pcmcia/smc91c92_cs.c +++ b/drivers/net/pcmcia/smc91c92_cs.c @@ -126,12 +126,6 @@ struct smc_private { int rx_ovrn; }; -struct smc_cfg_mem { - tuple_t tuple; - cisparse_t parse; - u_char buf[255]; -}; - /* Special definitions for Megahertz multifunction cards */ #define MEGAHERTZ_ISR 0x0380 @@ -408,34 +402,7 @@ static int cvt_ascii_address(struct net_device *dev, char *s) return 0; } -/*====================================================================*/ - -static int first_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) -{ - int i; - - i = pcmcia_get_first_tuple(handle, tuple); - if (i != 0) - return i; - i = pcmcia_get_tuple_data(handle, tuple); - if (i != 0) - return i; - return pcmcia_parse_tuple(tuple, parse); -} - -static int next_tuple(struct pcmcia_device *handle, tuple_t *tuple, - cisparse_t *parse) -{ - int i; - - if ((i = pcmcia_get_next_tuple(handle, tuple)) != 0 || - (i = pcmcia_get_tuple_data(handle, tuple)) != 0) - return i; - return pcmcia_parse_tuple(tuple, parse); -} - -/*====================================================================== +/*==================================================================== Configuration stuff for Megahertz cards @@ -490,15 +457,10 @@ static int mhz_mfc_config(struct pcmcia_device *link) { struct net_device *dev = link->priv; struct smc_private *smc = netdev_priv(dev); - struct smc_cfg_mem *cfg_mem; win_req_t req; memreq_t mem; int i; - cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -ENOMEM; - link->conf.Attributes |= CONF_ENABLE_SPKR; link->conf.Status = CCSR_AUDIO_ENA; link->irq.Attributes = @@ -510,7 +472,8 @@ static int mhz_mfc_config(struct pcmcia_device *link) /* The Megahertz combo cards have modem-like CIS entries, so we have to explicitly try a bunch of port combinations. */ if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL)) - goto free_cfg_mem; + return -ENODEV; + dev->base_addr = link->io.BasePort1; /* Allocate a memory window, for accessing the ISR */ @@ -519,7 +482,8 @@ static int mhz_mfc_config(struct pcmcia_device *link) req.AccessSpeed = 0; i = pcmcia_request_window(&link, &req, &link->win); if (i != 0) - goto free_cfg_mem; + return -ENODEV; + smc->base = ioremap(req.Base, req.Size); mem.CardOffset = mem.Page = 0; if (smc->manfid == MANFID_MOTOROLA) @@ -531,18 +495,32 @@ static int mhz_mfc_config(struct pcmcia_device *link) && (smc->cardid == PRODID_MEGAHERTZ_EM3288)) mhz_3288_power(link); -free_cfg_mem: - kfree(cfg_mem); - return -ENODEV; + return 0; } +static int pcmcia_get_versmac(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) +{ + struct net_device *dev = priv; + cisparse_t parse; + + if (pcmcia_parse_tuple(tuple, &parse)) + return -EINVAL; + + if ((parse.version_1.ns > 3) && + (cvt_ascii_address(dev, + (parse.version_1.str + parse.version_1.ofs[3])))) + return 0; + + return -EINVAL; +}; + static int mhz_setup(struct pcmcia_device *link) { struct net_device *dev = link->priv; - struct smc_cfg_mem *cfg_mem; - tuple_t *tuple; - cisparse_t *parse; - u_char *buf, *station_addr; + size_t len; + u8 *buf; int rc; /* Read the station address from the CIS. It is stored as the last @@ -552,56 +530,22 @@ static int mhz_setup(struct pcmcia_device *link) return 0; /* Workarounds for broken cards start here. */ - - cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -1; - - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - buf = cfg_mem->buf; - - tuple->Attributes = tuple->TupleOffset = 0; - tuple->TupleData = (cisdata_t *)buf; - tuple->TupleDataMax = 255; - /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */ - tuple->DesiredTuple = CISTPL_VERS_1; - if (first_tuple(link, tuple, parse) != 0) { - rc = -1; - goto free_cfg_mem; - } - /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */ - if (next_tuple(link, tuple, parse) != 0) - first_tuple(link, tuple, parse); - if (parse->version_1.ns > 3) { - station_addr = parse->version_1.str + parse->version_1.ofs[3]; - if (cvt_ascii_address(dev, station_addr) == 0) { - rc = 0; - goto free_cfg_mem; - } - } + if (!pcmcia_loop_tuple(link, CISTPL_VERS_1, pcmcia_get_versmac, dev)) + return 0; /* Another possibility: for the EM3288, in a special tuple */ - tuple->DesiredTuple = 0x81; - if (pcmcia_get_first_tuple(link, tuple) != 0) { - rc = -1; - goto free_cfg_mem; - } - if (pcmcia_get_tuple_data(link, tuple) != 0) { - rc = -1; - goto free_cfg_mem; - } - buf[12] = '\0'; - if (cvt_ascii_address(dev, buf) == 0) { - rc = 0; - goto free_cfg_mem; - } rc = -1; -free_cfg_mem: - kfree(cfg_mem); - return rc; -} + len = pcmcia_get_tuple(link, 0x81, &buf); + if (buf && len >= 13) { + buf[12] = '\0'; + if (cvt_ascii_address(dev, buf)) + rc = 0; + } + kfree(buf); + + return rc; +}; /*====================================================================== @@ -691,58 +635,21 @@ static int smc_config(struct pcmcia_device *link) return i; } + static int smc_setup(struct pcmcia_device *link) { struct net_device *dev = link->priv; - struct smc_cfg_mem *cfg_mem; - tuple_t *tuple; - cisparse_t *parse; - cistpl_lan_node_id_t *node_id; - u_char *buf, *station_addr; - int i, rc; - - cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -ENOMEM; - - tuple = &cfg_mem->tuple; - parse = &cfg_mem->parse; - buf = cfg_mem->buf; - - tuple->Attributes = tuple->TupleOffset = 0; - tuple->TupleData = (cisdata_t *)buf; - tuple->TupleDataMax = 255; /* Check for a LAN function extension tuple */ - tuple->DesiredTuple = CISTPL_FUNCE; - i = first_tuple(link, tuple, parse); - while (i == 0) { - if (parse->funce.type == CISTPL_FUNCE_LAN_NODE_ID) - break; - i = next_tuple(link, tuple, parse); - } - if (i == 0) { - node_id = (cistpl_lan_node_id_t *)parse->funce.data; - if (node_id->nb == 6) { - for (i = 0; i < 6; i++) - dev->dev_addr[i] = node_id->id[i]; - rc = 0; - goto free_cfg_mem; - } - } + if (!pcmcia_get_mac_from_cis(link, dev)) + return 0; + /* Try the third string in the Version 1 Version/ID tuple. */ if (link->prod_id[2]) { - station_addr = link->prod_id[2]; - if (cvt_ascii_address(dev, station_addr) == 0) { - rc = 0; - goto free_cfg_mem; - } + if (cvt_ascii_address(dev, link->prod_id[2]) == 0) + return 0; } - - rc = -1; -free_cfg_mem: - kfree(cfg_mem); - return rc; + return -1; } /*====================================================================*/ @@ -801,41 +708,31 @@ static int osi_load_firmware(struct pcmcia_device *link) return err; } -static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid) +static int pcmcia_osi_mac(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) { - struct net_device *dev = link->priv; - struct smc_cfg_mem *cfg_mem; - tuple_t *tuple; - u_char *buf; - int i, rc; + struct net_device *dev = priv; + int i; - cfg_mem = kmalloc(sizeof(struct smc_cfg_mem), GFP_KERNEL); - if (!cfg_mem) - return -1; + if (tuple->TupleDataLen < 8) + return -EINVAL; + if (tuple->TupleData[0] != 0x04) + return -EINVAL; + for (i = 0; i < 6; i++) + dev->dev_addr[i] = tuple->TupleData[i+2]; + return 0; +}; - tuple = &cfg_mem->tuple; - buf = cfg_mem->buf; - tuple->Attributes = TUPLE_RETURN_COMMON; - tuple->TupleData = (cisdata_t *)buf; - tuple->TupleDataMax = 255; - tuple->TupleOffset = 0; +static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid) +{ + struct net_device *dev = link->priv; + int rc; /* Read the station address from tuple 0x90, subtuple 0x04 */ - tuple->DesiredTuple = 0x90; - i = pcmcia_get_first_tuple(link, tuple); - while (i == 0) { - i = pcmcia_get_tuple_data(link, tuple); - if ((i != 0) || (buf[0] == 0x04)) - break; - i = pcmcia_get_next_tuple(link, tuple); - } - if (i != 0) { - rc = -1; - goto free_cfg_mem; - } - for (i = 0; i < 6; i++) - dev->dev_addr[i] = buf[i+2]; + if (pcmcia_loop_tuple(link, 0x90, pcmcia_osi_mac, dev)) + return -1; if (((manfid == MANFID_OSITECH) && (cardid == PRODID_OSITECH_SEVEN)) || @@ -843,7 +740,7 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid) (cardid == PRODID_PSION_NET100))) { rc = osi_load_firmware(link); if (rc) - goto free_cfg_mem; + return rc; } else if (manfid == MANFID_OSITECH) { /* Make sure both functions are powered up */ set_bits(0x300, link->io.BasePort1 + OSITECH_AUI_PWR); @@ -853,10 +750,7 @@ static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid) inw(link->io.BasePort1 + OSITECH_AUI_PWR), inw(link->io.BasePort1 + OSITECH_RESET_ISR)); } - rc = 0; -free_cfg_mem: - kfree(cfg_mem); - return rc; + return 0; } static int smc91c92_suspend(struct pcmcia_device *link) diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index 3dd6ba6..8ed8449 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -371,28 +371,6 @@ static void do_powerdown(struct net_device *dev); static int do_stop(struct net_device *dev); /*=============== Helper functions =========================*/ -static int -first_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) -{ - int err; - - if ((err = pcmcia_get_first_tuple(handle, tuple)) == 0 && - (err = pcmcia_get_tuple_data(handle, tuple)) == 0) - err = pcmcia_parse_tuple(tuple, parse); - return err; -} - -static int -next_tuple(struct pcmcia_device *handle, tuple_t *tuple, cisparse_t *parse) -{ - int err; - - if ((err = pcmcia_get_next_tuple(handle, tuple)) == 0 && - (err = pcmcia_get_tuple_data(handle, tuple)) == 0) - err = pcmcia_parse_tuple(tuple, parse); - return err; -} - #define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR) #define GetByte(reg) ((unsigned)inb(ioaddr + (reg))) #define GetWord(reg) ((unsigned)inw(ioaddr + (reg))) @@ -761,6 +739,26 @@ xirc2ps_config_check(struct pcmcia_device *p_dev, } + +static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev, + tuple_t *tuple, + void *priv) +{ + struct net_device *dev = priv; + int i; + + if (tuple->TupleDataLen != 13) + return -EINVAL; + if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) || + (tuple->TupleData[2] != 6)) + return -EINVAL; + /* another try (James Lehmer's CE2 version 4.1)*/ + for (i = 2; i < 6; i++) + dev->dev_addr[i] = tuple->TupleData[i+2]; + return 0; +}; + + /**************** * xirc2ps_config() is scheduled to run after a CARD_INSERTION event * is received, to configure the PCMCIA socket, and to make the @@ -774,9 +772,9 @@ xirc2ps_config(struct pcmcia_device * link) unsigned int ioaddr; tuple_t tuple; cisparse_t parse; - int err, i; - u_char buf[64]; - cistpl_lan_node_id_t *node_id = (cistpl_lan_node_id_t*)parse.funce.data; + int err; + u8 *buf; + size_t len; local->dingo_ccr = NULL; @@ -827,49 +825,28 @@ xirc2ps_config(struct pcmcia_device * link) } /* get the ethernet address from the CIS */ - tuple.DesiredTuple = CISTPL_FUNCE; - for (err = first_tuple(link, &tuple, &parse); !err; - err = next_tuple(link, &tuple, &parse)) { - /* Once I saw two CISTPL_FUNCE_LAN_NODE_ID entries: - * the first one with a length of zero the second correct - - * so I skip all entries with length 0 */ - if (parse.funce.type == CISTPL_FUNCE_LAN_NODE_ID - && ((cistpl_lan_node_id_t *)parse.funce.data)->nb) - break; - } - if (err) { /* not found: try to get the node-id from tuple 0x89 */ - tuple.DesiredTuple = 0x89; /* data layout looks like tuple 0x22 */ - if ((err = pcmcia_get_first_tuple(link, &tuple)) == 0 && - (err = pcmcia_get_tuple_data(link, &tuple)) == 0) { - if (tuple.TupleDataLen == 8 && *buf == CISTPL_FUNCE_LAN_NODE_ID) - memcpy(&parse, buf, 8); - else - err = -1; - } - } - if (err) { /* another try (James Lehmer's CE2 version 4.1)*/ - tuple.DesiredTuple = CISTPL_FUNCE; - for (err = first_tuple(link, &tuple, &parse); !err; - err = next_tuple(link, &tuple, &parse)) { - if (parse.funce.type == 0x02 && parse.funce.data[0] == 1 - && parse.funce.data[1] == 6 && tuple.TupleDataLen == 13) { - buf[1] = 4; - memcpy(&parse, buf+1, 8); - break; + err = pcmcia_get_mac_from_cis(link, dev); + + /* not found: try to get the node-id from tuple 0x89 */ + if (err) { + len = pcmcia_get_tuple(link, 0x89, &buf); + /* data layout looks like tuple 0x22 */ + if (buf && len == 8) { + if (*buf == CISTPL_FUNCE_LAN_NODE_ID) + memcpy(&parse, buf, 8); + else + err = -1; } - } + kfree(buf); } + + if (err) + err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev); + if (err) { printk(KNOT_XIRC "node-id not found in CIS\n"); goto failure; } - node_id = (cistpl_lan_node_id_t *)parse.funce.data; - if (node_id->nb != 6) { - printk(KNOT_XIRC "malformed node-id in CIS\n"); - goto failure; - } - for (i=0; i < 6; i++) - dev->dev_addr[i] = node_id->id[i]; link->io.IOAddrLines =10; link->io.Attributes1 = IO_DATA_PATH_WIDTH_16; -- 1.6.0.4 ^ permalink raw reply related [flat|nested] 6+ messages in thread
* Re: [PATCH 3/9] pcmcia: use pcmcia_loop_config in misc pcmcia drivers 2009-10-18 23:07 ` [PATCH 3/9] pcmcia: use pcmcia_loop_config in misc pcmcia drivers Dominik Brodowski [not found] ` <1255907255-28297-4-git-send-email-linux@dominikbrodowski.net> @ 2009-10-19 13:45 ` Jiri Kosina [not found] ` <1255907255-28297-3-git-send-email-linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org> 2 siblings, 0 replies; 6+ messages in thread From: Jiri Kosina @ 2009-10-19 13:45 UTC (permalink / raw) To: Dominik Brodowski Cc: linux-pcmcia, David S. Miller, John W. Linville, David Sterba, netdev, linux-wireless On Mon, 19 Oct 2009, Dominik Brodowski wrote: > Use pcmcia_loop_config() in a few drivers missed during the first > round. On fmvj18x_cs.c it -- strangely -- only requries us to set > conf.ConfigIndex, which is done by the core, so include an empty > loop function which returns 0 unconditionally. > > CC: David S. Miller <davem@davemloft.net> > CC: John W. Linville <linville@tuxdriver.com> > CC: Jiri Kosina <jkosina@suse.cz> > CC: David Sterba <dsterba@suse.cz> > CC: netdev@vger.kernel.org > CC: linux-wireless@vger.kernel.org > Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> > --- > drivers/char/pcmcia/ipwireless/main.c | 103 +++++++-------------------------- For the ipwireless part Acked-by: Jiri Kosina <jkosina@suse.cz> Thanks, -- Jiri Kosina SUSE Labs, Novell Inc. ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <1255907255-28297-3-git-send-email-linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org>]
* Re: [PATCH 3/9] pcmcia: use pcmcia_loop_config in misc pcmcia drivers [not found] ` <1255907255-28297-3-git-send-email-linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org> @ 2009-10-27 19:28 ` John W. Linville 0 siblings, 0 replies; 6+ messages in thread From: John W. Linville @ 2009-10-27 19:28 UTC (permalink / raw) To: Dominik Brodowski Cc: linux-pcmcia-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r, David S. Miller, Jiri Kosina, David Sterba, netdev-u79uwXL29TY76Z2rM5mHXA, linux-wireless-u79uwXL29TY76Z2rM5mHXA On Mon, Oct 19, 2009 at 01:07:29AM +0200, Dominik Brodowski wrote: > Use pcmcia_loop_config() in a few drivers missed during the first > round. On fmvj18x_cs.c it -- strangely -- only requries us to set > conf.ConfigIndex, which is done by the core, so include an empty > loop function which returns 0 unconditionally. > > CC: David S. Miller <davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org> > CC: John W. Linville <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org> > CC: Jiri Kosina <jkosina-AlSwsSmVLrQ@public.gmane.org> > CC: David Sterba <dsterba-AlSwsSmVLrQ@public.gmane.org> > CC: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > CC: linux-wireless-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > Signed-off-by: Dominik Brodowski <linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org> Acked-by: John W. Linville <linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org> -- John W. Linville Someday the world will need a hero, and you linville-2XuSBdqkA4R54TAoqtyWWQ@public.gmane.org might be all we have. Be ready. -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [PATCH 2/9] pcmcia: use pre-determined values 2009-10-18 23:07 ` [PATCH 2/9] pcmcia: use pre-determined values Dominik Brodowski 2009-10-18 23:07 ` [PATCH 3/9] pcmcia: use pcmcia_loop_config in misc pcmcia drivers Dominik Brodowski @ 2009-10-27 19:28 ` John W. Linville 1 sibling, 0 replies; 6+ messages in thread From: John W. Linville @ 2009-10-27 19:28 UTC (permalink / raw) To: Dominik Brodowski; +Cc: linux-pcmcia, David S. Miller, netdev, linux-wireless On Mon, Oct 19, 2009 at 01:07:28AM +0200, Dominik Brodowski wrote: > A few PCMCIA network drivers can make use of values provided by the pcmcia > core, instead of tedious, independent CIS parsing. > > xirc32ps_cs.c: manf_id > > hostap_cs.c: multifunction count > > b43/pcmcia.c: ConfigBase address and "Present" > > smc91c92_cs.c: By default, mhz_setup() can use VERS_1 as it is stored > in struct pcmcia_device. Only some cards require workarounds, such as > reading out VERS_1 twice. > > CC: David S. Miller <davem@davemloft.net> > CC: John W. Linville <linville@tuxdriver.com> > CC: netdev@vger.kernel.org > CC: linux-wireless@vger.kernel.org > Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Acked-by: John W. Linville <linville@tuxdriver.com> -- John W. Linville Someday the world will need a hero, and you linville@tuxdriver.com might be all we have. Be ready. ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2009-10-27 19:31 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <1255907255-28297-1-git-send-email-linux@dominikbrodowski.net>
2009-10-18 23:07 ` [PATCH 2/9] pcmcia: use pre-determined values Dominik Brodowski
2009-10-18 23:07 ` [PATCH 3/9] pcmcia: use pcmcia_loop_config in misc pcmcia drivers Dominik Brodowski
[not found] ` <1255907255-28297-4-git-send-email-linux@dominikbrodowski.net>
[not found] ` <1255907255-28297-5-git-send-email-linux@dominikbrodowski.net>
2009-10-18 23:07 ` [PATCH 6/9] pcmcia: convert net pcmcia drivers to use new CIS helpers Dominik Brodowski
2009-10-19 13:45 ` [PATCH 3/9] pcmcia: use pcmcia_loop_config in misc pcmcia drivers Jiri Kosina
[not found] ` <1255907255-28297-3-git-send-email-linux-X3ehHDuj6sIIGcDfoQAp7OTW4wlIGRCZ@public.gmane.org>
2009-10-27 19:28 ` John W. Linville
2009-10-27 19:28 ` [PATCH 2/9] pcmcia: use pre-determined values John W. Linville
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).