From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
Alexander Duyck <alexander.h.duyck@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next-2.6 PATCH 20/20] igb: cleanup "todo" code found in igb_ethtool.c
Date: Tue, 27 Oct 2009 18:55:41 -0700 [thread overview]
Message-ID: <20091028015540.12470.4985.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091028014858.12470.99520.stgit@localhost.localdomain>
From: Alexander Duyck <alexander.h.duyck@intel.com>
This patch moves some defines into the e1000_regs.h file since this is the
correct place for register defines and not inside of igb_ethtool.c
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/igb/e1000_regs.h | 7 +++++++
drivers/net/igb/igb_ethtool.c | 11 +----------
2 files changed, 8 insertions(+), 10 deletions(-)
diff --git a/drivers/net/igb/e1000_regs.h b/drivers/net/igb/e1000_regs.h
index 76c3389..e06c3b7 100644
--- a/drivers/net/igb/e1000_regs.h
+++ b/drivers/net/igb/e1000_regs.h
@@ -288,10 +288,17 @@ enum {
#define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */
#define E1000_RA 0x05400 /* Receive Address - RW Array */
#define E1000_RA2 0x054E0 /* 2nd half of receive address array - RW Array */
+#define E1000_PSRTYPE(_i) (0x05480 + ((_i) * 4))
#define E1000_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \
(0x054E0 + ((_i - 16) * 8)))
#define E1000_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \
(0x054E4 + ((_i - 16) * 8)))
+#define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
+#define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
+#define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
+#define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8))
+#define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8))
+#define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8))
#define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */
#define E1000_VT_CTL 0x0581C /* VMDq Control - RW */
#define E1000_WUC 0x05800 /* Wakeup Control - RW */
diff --git a/drivers/net/igb/igb_ethtool.c b/drivers/net/igb/igb_ethtool.c
index 65c538f..048a615 100644
--- a/drivers/net/igb/igb_ethtool.c
+++ b/drivers/net/igb/igb_ethtool.c
@@ -502,19 +502,10 @@ static void igb_get_regs(struct net_device *netdev,
regs_buff[119] = adapter->stats.scvpc;
regs_buff[120] = adapter->stats.hrmpc;
- /* These should probably be added to e1000_regs.h instead */
- #define E1000_PSRTYPE_REG(_i) (0x05480 + ((_i) * 4))
- #define E1000_IP4AT_REG(_i) (0x05840 + ((_i) * 8))
- #define E1000_IP6AT_REG(_i) (0x05880 + ((_i) * 4))
- #define E1000_WUPM_REG(_i) (0x05A00 + ((_i) * 4))
- #define E1000_FFMT_REG(_i) (0x09000 + ((_i) * 8))
- #define E1000_FFVT_REG(_i) (0x09800 + ((_i) * 8))
- #define E1000_FFLT_REG(_i) (0x05F00 + ((_i) * 8))
-
for (i = 0; i < 4; i++)
regs_buff[121 + i] = rd32(E1000_SRRCTL(i));
for (i = 0; i < 4; i++)
- regs_buff[125 + i] = rd32(E1000_PSRTYPE_REG(i));
+ regs_buff[125 + i] = rd32(E1000_PSRTYPE(i));
for (i = 0; i < 4; i++)
regs_buff[129 + i] = rd32(E1000_RDBAL(i));
for (i = 0; i < 4; i++)
next prev parent reply other threads:[~2009-10-28 1:59 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-28 1:49 [net-next-2.6 PATCH 01/20] igb: add new data structure for handling interrupts and NAPI Jeff Kirsher
2009-10-28 1:49 ` [net-next-2.6 PATCH 02/20] igb: remove rx checksum good counter Jeff Kirsher
2009-10-28 1:50 ` [net-next-2.6 PATCH 03/20] igb: increase minimum rx buffer size to 1K Jeff Kirsher
2009-10-28 1:50 ` [net-next-2.6 PATCH 04/20] igb: move the tx and rx ring specific config into seperate functions Jeff Kirsher
2009-10-28 1:50 ` [net-next-2.6 PATCH 05/20] igb: remove rx_ps_hdr_len Jeff Kirsher
2009-10-28 1:51 ` [net-next-2.6 PATCH 06/20] igb: move SRRCTL register configuration into ring specific config Jeff Kirsher
2009-10-28 1:51 ` [net-next-2.6 PATCH 07/20] igb: change the head and tail offsets into pointers Jeff Kirsher
2009-10-28 1:51 ` [net-next-2.6 PATCH 08/20] igb: add pci device pointer to ring structure Jeff Kirsher
2009-10-28 1:52 ` [net-next-2.6 PATCH 09/20] igb: move rx_buffer_len into the " Jeff Kirsher
2009-10-28 1:52 ` [net-next-2.6 PATCH 10/20] igb: move alloc_failed and csum_err stats into per rx-ring stat Jeff Kirsher
2009-10-28 1:52 ` [net-next-2.6 PATCH 11/20] igb: add a flags value to the ring Jeff Kirsher
2009-10-28 1:53 ` [net-next-2.6 PATCH 12/20] igb: place a pointer to the netdev struct in the ring itself Jeff Kirsher
2009-10-28 1:53 ` [net-next-2.6 PATCH 13/20] igb: move the multiple receive queue configuration into seperate function Jeff Kirsher
2009-10-28 1:53 ` [net-next-2.6 PATCH 14/20] igb: delay VF reset notification until after interrupts are enabed Jeff Kirsher
2009-10-28 1:54 ` [net-next-2.6 PATCH 15/20] igb: setup vlan tag replication stripping in igb_vmm_control Jeff Kirsher
2009-10-28 1:54 ` [net-next-2.6 PATCH 16/20] igb: re-use ring configuration code in ethtool testing Jeff Kirsher
2009-10-28 1:54 ` [net-next-2.6 PATCH 17/20] igb: make tx ring map and free functionality non-static Jeff Kirsher
2009-10-28 1:55 ` [net-next-2.6 PATCH 18/20] igb: make ethtool use core xmit map and free functionality Jeff Kirsher
2009-10-28 1:55 ` [net-next-2.6 PATCH 19/20] igb: add single vector msi-x testing to interrupt test Jeff Kirsher
2009-10-28 1:55 ` Jeff Kirsher [this message]
2009-10-28 8:28 ` [net-next-2.6 PATCH 01/20] igb: add new data structure for handling interrupts and NAPI David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091028015540.12470.4985.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=alexander.h.duyck@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).