From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
Alexander Duyck <alexander.h.duyck@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next-2.6 PATCH 07/23] igb: rework handling of the vfta and vlvf registers in relation to mng_vlan
Date: Wed, 28 Oct 2009 02:47:35 -0700 [thread overview]
Message-ID: <20091028094734.13156.1387.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091028094540.13156.2637.stgit@localhost.localdomain>
From: Alexander Duyck <alexander.h.duyck@intel.com>
This patch corrects some errors in how vlans are being handled when vfs
start interacting with the management vlans.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/igb/igb_main.c | 94 +++++++++++++++-----------------------------
1 files changed, 32 insertions(+), 62 deletions(-)
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 3ab2978..9170927 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -963,24 +963,23 @@ static void igb_irq_enable(struct igb_adapter *adapter)
static void igb_update_mng_vlan(struct igb_adapter *adapter)
{
- struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
u16 vid = adapter->hw.mng_cookie.vlan_id;
u16 old_vid = adapter->mng_vlan_id;
- if (adapter->vlgrp) {
- if (!vlan_group_get_device(adapter->vlgrp, vid)) {
- if (adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
- igb_vlan_rx_add_vid(netdev, vid);
- adapter->mng_vlan_id = vid;
- } else
- adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
- if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
- (vid != old_vid) &&
- !vlan_group_get_device(adapter->vlgrp, old_vid))
- igb_vlan_rx_kill_vid(netdev, old_vid);
- } else
- adapter->mng_vlan_id = vid;
+ if (hw->mng_cookie.status & E1000_MNG_DHCP_COOKIE_STATUS_VLAN) {
+ /* add VID to filter table */
+ igb_vfta_set(hw, vid, true);
+ adapter->mng_vlan_id = vid;
+ } else {
+ adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
+ }
+
+ if ((old_vid != (u16)IGB_MNG_VLAN_NONE) &&
+ (vid != old_vid) &&
+ !vlan_group_get_device(adapter->vlgrp, old_vid)) {
+ /* remove VID from filter table */
+ igb_vfta_set(hw, old_vid, false);
}
}
@@ -1847,11 +1846,6 @@ static int igb_open(struct net_device *netdev)
/* e1000_power_up_phy(adapter); */
- adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
- if ((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN))
- igb_update_mng_vlan(adapter);
-
/* before we allocate an interrupt, we must be ready to handle it.
* Setting DEBUG_SHIRQ in the kernel makes it fire an interrupt
* as soon as we call pci_request_irq, so we have to setup our
@@ -1924,14 +1918,6 @@ static int igb_close(struct net_device *netdev)
igb_free_all_tx_resources(adapter);
igb_free_all_rx_resources(adapter);
- /* kill manageability vlan ID if supported, but not if a vlan with
- * the same ID is registered on the host OS (let 8021q kill it) */
- if ((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
- !(adapter->vlgrp &&
- vlan_group_get_device(adapter->vlgrp, adapter->mng_vlan_id)))
- igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
-
return 0;
}
@@ -4235,7 +4221,11 @@ static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
struct e1000_hw *hw = &adapter->hw;
u32 reg, i;
- /* It is an error to call this function when VFs are not enabled */
+ /* The vlvf table only exists on 82576 hardware and newer */
+ if (hw->mac.type < e1000_82576)
+ return -1;
+
+ /* we only need to do this if VMDq is enabled */
if (!adapter->vfs_allocated_count)
return -1;
@@ -4265,16 +4255,12 @@ static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
/* if !enabled we need to set this up in vfta */
if (!(reg & E1000_VLVF_VLANID_ENABLE)) {
- /* add VID to filter table, if bit already set
- * PF must have added it outside of table */
- if (igb_vfta_set(hw, vid, true))
- reg |= 1 << (E1000_VLVF_POOLSEL_SHIFT +
- adapter->vfs_allocated_count);
+ /* add VID to filter table */
+ igb_vfta_set(hw, vid, true);
reg |= E1000_VLVF_VLANID_ENABLE;
}
reg &= ~E1000_VLVF_VLANID_MASK;
reg |= vid;
-
wr32(E1000_VLVF(i), reg);
/* do not modify RLPML for PF devices */
@@ -4290,8 +4276,8 @@ static s32 igb_vlvf_set(struct igb_adapter *adapter, u32 vid, bool add, u32 vf)
reg |= size;
wr32(E1000_VMOLR(vf), reg);
}
- adapter->vf_data[vf].vlans_enabled++;
+ adapter->vf_data[vf].vlans_enabled++;
return 0;
}
} else {
@@ -5393,21 +5379,15 @@ static void igb_vlan_rx_register(struct net_device *netdev,
ctrl |= E1000_CTRL_VME;
wr32(E1000_CTRL, ctrl);
- /* enable VLAN receive filtering */
+ /* Disable CFI check */
rctl = rd32(E1000_RCTL);
rctl &= ~E1000_RCTL_CFIEN;
wr32(E1000_RCTL, rctl);
- igb_update_mng_vlan(adapter);
} else {
/* disable VLAN tag insert/strip */
ctrl = rd32(E1000_CTRL);
ctrl &= ~E1000_CTRL_VME;
wr32(E1000_CTRL, ctrl);
-
- if (adapter->mng_vlan_id != (u16)IGB_MNG_VLAN_NONE) {
- igb_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id);
- adapter->mng_vlan_id = IGB_MNG_VLAN_NONE;
- }
}
igb_rlpml_set(adapter);
@@ -5422,16 +5402,11 @@ static void igb_vlan_rx_add_vid(struct net_device *netdev, u16 vid)
struct e1000_hw *hw = &adapter->hw;
int pf_id = adapter->vfs_allocated_count;
- if ((hw->mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
- (vid == adapter->mng_vlan_id))
- return;
-
- /* add vid to vlvf if sr-iov is enabled,
- * if that fails add directly to filter table */
- if (igb_vlvf_set(adapter, vid, true, pf_id))
- igb_vfta_set(hw, vid, true);
+ /* attempt to add filter to vlvf array */
+ igb_vlvf_set(adapter, vid, true, pf_id);
+ /* add the filter since PF can receive vlans w/o entry in vlvf */
+ igb_vfta_set(hw, vid, true);
}
static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
@@ -5439,6 +5414,7 @@ static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
struct igb_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
int pf_id = adapter->vfs_allocated_count;
+ s32 err;
igb_irq_disable(adapter);
vlan_group_set_device(adapter->vlgrp, vid, NULL);
@@ -5446,17 +5422,11 @@ static void igb_vlan_rx_kill_vid(struct net_device *netdev, u16 vid)
if (!test_bit(__IGB_DOWN, &adapter->state))
igb_irq_enable(adapter);
- if ((adapter->hw.mng_cookie.status &
- E1000_MNG_DHCP_COOKIE_STATUS_VLAN) &&
- (vid == adapter->mng_vlan_id)) {
- /* release control to f/w */
- igb_release_hw_control(adapter);
- return;
- }
+ /* remove vlan from VLVF table array */
+ err = igb_vlvf_set(adapter, vid, false, pf_id);
- /* remove vid from vlvf if sr-iov is enabled,
- * if not in vlvf remove from vfta */
- if (igb_vlvf_set(adapter, vid, false, pf_id))
+ /* if vid was not present in VLVF just remove it from table */
+ if (err)
igb_vfta_set(hw, vid, false);
}
next prev parent reply other threads:[~2009-10-28 9:51 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-28 9:45 [net-next-2.6 PATCH 01/23] igb: add support for seperate tx-usecs setting in ethtool Jeff Kirsher
2009-10-28 9:46 ` [net-next-2.6 PATCH 02/23] igb: cleanup some of the code related to hw timestamping Jeff Kirsher
2009-10-28 9:46 ` [net-next-2.6 PATCH 03/23] igb: misc cleanups within igb_ethtool.c Jeff Kirsher
2009-10-28 9:46 ` [net-next-2.6 PATCH 04/23] igb: use packet buffer sizes from RXPBS register Jeff Kirsher
2009-10-28 9:46 ` [net-next-2.6 PATCH 05/23] igb: replace the VF clear_to_send with a flags value Jeff Kirsher
2009-10-28 9:47 ` [net-next-2.6 PATCH 06/23] igb: rework use of VMOLR in regards to PF and VFs Jeff Kirsher
2009-10-28 9:47 ` Jeff Kirsher [this message]
2009-10-28 9:47 ` [net-next-2.6 PATCH 08/23] igb: move vf init into a seperate function Jeff Kirsher
2009-10-28 9:48 ` [net-next-2.6 PATCH 09/23] igb: only process global stats in igb_update_stats Jeff Kirsher
2009-10-28 9:48 ` [net-next-2.6 PATCH 10/23] igb: move global_quad_port_a from global into local static define Jeff Kirsher
2009-10-28 9:48 ` [net-next-2.6 PATCH 11/23] igb: make tx hang check multiqueue, check eop descriptor Jeff Kirsher
2009-10-28 9:49 ` [net-next-2.6 PATCH 12/23] igb: cleanup code related to ring resource allocation and free Jeff Kirsher
2009-10-28 9:49 ` [net-next-2.6 PATCH 13/23] igb: change queue ordering for 82576 based adapters Jeff Kirsher
2009-10-28 9:49 ` [net-next-2.6 PATCH 14/23] igb: cleanup interrupt enablement in regards to msix_other Jeff Kirsher
2009-10-28 9:50 ` [net-next-2.6 PATCH 15/23] igb: Remove invalid stats counters Jeff Kirsher
2009-10-28 9:50 ` [net-next-2.6 PATCH 16/23] igb: cleanup igb.h header whitespace and some structure formatting Jeff Kirsher
2009-10-28 9:50 ` [net-next-2.6 PATCH 17/23] igb: cleanup igb xmit frame path Jeff Kirsher
2009-10-28 9:51 ` [net-next-2.6 PATCH 18/23] igb: cleanup clean_rx_irq_adv and alloc_rx_buffers_adv Jeff Kirsher
2009-10-28 9:51 ` [net-next-2.6 PATCH 19/23] igb: replace unecessary &adapter->hw with just hw where applicable Jeff Kirsher
2009-10-28 9:51 ` [net-next-2.6 PATCH 20/23] igb: add pci_dev in few spots to clean up use of dev_err/info/warn Jeff Kirsher
2009-10-28 9:52 ` [net-next-2.6 PATCH 21/23] igb: limit minimum mtu to 68 to keep ip bound to interface Jeff Kirsher
2009-10-28 9:52 ` [net-next-2.6 PATCH 22/23] igb: open up SCTP checksum offloads to all MACs 82576 and newer Jeff Kirsher
2009-10-28 9:52 ` [net-next-2.6 PATCH 23/23] igb: cleanup whitespace issues in igb_main.c Jeff Kirsher
2009-10-28 10:39 ` [net-next-2.6 PATCH 01/23] igb: add support for seperate tx-usecs setting in ethtool David Miller
2009-10-28 15:42 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091028094734.13156.1387.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=alexander.h.duyck@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).