netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
	Alexander Duyck <alexander.h.duyck@intel.com>,
	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next-2.6 PATCH 13/23] igb: change queue ordering for 82576 based adapters
Date: Wed, 28 Oct 2009 02:49:40 -0700	[thread overview]
Message-ID: <20091028094939.13156.75956.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091028094540.13156.2637.stgit@localhost.localdomain>

From: Alexander Duyck <alexander.h.duyck@intel.com>

This patch changes the queue ordering for 82576 adapters so that if VFs are
enabled the queues will first be allocated out of the PF pool.  Any
remaining queues will be allocated out of other VMDq pools.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---

 drivers/net/igb/igb_main.c |   25 +++++++++++++------------
 1 files changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index e67ff0e..52c4302 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -285,7 +285,7 @@ module_exit(igb_exit_module);
  **/
 static void igb_cache_ring_register(struct igb_adapter *adapter)
 {
-	int i;
+	int i = 0, j = 0;
 	u32 rbase_offset = adapter->vfs_allocated_count;
 
 	switch (adapter->hw.mac.type) {
@@ -295,19 +295,20 @@ static void igb_cache_ring_register(struct igb_adapter *adapter)
 		 * In order to avoid collision we start at the first free queue
 		 * and continue consuming queues in the same sequence
 		 */
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].reg_idx = rbase_offset +
-			                              Q_IDX_82576(i);
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].reg_idx = rbase_offset +
-			                              Q_IDX_82576(i);
-		break;
+		if (adapter->vfs_allocated_count) {
+			for (; i < adapter->num_rx_queues; i++)
+				adapter->rx_ring[i].reg_idx = rbase_offset +
+				                              Q_IDX_82576(i);
+			for (; j < adapter->num_tx_queues; j++)
+				adapter->tx_ring[j].reg_idx = rbase_offset +
+				                              Q_IDX_82576(j);
+		}
 	case e1000_82575:
 	default:
-		for (i = 0; i < adapter->num_rx_queues; i++)
-			adapter->rx_ring[i].reg_idx = i;
-		for (i = 0; i < adapter->num_tx_queues; i++)
-			adapter->tx_ring[i].reg_idx = i;
+		for (; i < adapter->num_rx_queues; i++)
+			adapter->rx_ring[i].reg_idx = rbase_offset + i;
+		for (; j < adapter->num_tx_queues; j++)
+			adapter->tx_ring[j].reg_idx = rbase_offset + j;
 		break;
 	}
 }


  parent reply	other threads:[~2009-10-28  9:53 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-10-28  9:45 [net-next-2.6 PATCH 01/23] igb: add support for seperate tx-usecs setting in ethtool Jeff Kirsher
2009-10-28  9:46 ` [net-next-2.6 PATCH 02/23] igb: cleanup some of the code related to hw timestamping Jeff Kirsher
2009-10-28  9:46 ` [net-next-2.6 PATCH 03/23] igb: misc cleanups within igb_ethtool.c Jeff Kirsher
2009-10-28  9:46 ` [net-next-2.6 PATCH 04/23] igb: use packet buffer sizes from RXPBS register Jeff Kirsher
2009-10-28  9:46 ` [net-next-2.6 PATCH 05/23] igb: replace the VF clear_to_send with a flags value Jeff Kirsher
2009-10-28  9:47 ` [net-next-2.6 PATCH 06/23] igb: rework use of VMOLR in regards to PF and VFs Jeff Kirsher
2009-10-28  9:47 ` [net-next-2.6 PATCH 07/23] igb: rework handling of the vfta and vlvf registers in relation to mng_vlan Jeff Kirsher
2009-10-28  9:47 ` [net-next-2.6 PATCH 08/23] igb: move vf init into a seperate function Jeff Kirsher
2009-10-28  9:48 ` [net-next-2.6 PATCH 09/23] igb: only process global stats in igb_update_stats Jeff Kirsher
2009-10-28  9:48 ` [net-next-2.6 PATCH 10/23] igb: move global_quad_port_a from global into local static define Jeff Kirsher
2009-10-28  9:48 ` [net-next-2.6 PATCH 11/23] igb: make tx hang check multiqueue, check eop descriptor Jeff Kirsher
2009-10-28  9:49 ` [net-next-2.6 PATCH 12/23] igb: cleanup code related to ring resource allocation and free Jeff Kirsher
2009-10-28  9:49 ` Jeff Kirsher [this message]
2009-10-28  9:49 ` [net-next-2.6 PATCH 14/23] igb: cleanup interrupt enablement in regards to msix_other Jeff Kirsher
2009-10-28  9:50 ` [net-next-2.6 PATCH 15/23] igb: Remove invalid stats counters Jeff Kirsher
2009-10-28  9:50 ` [net-next-2.6 PATCH 16/23] igb: cleanup igb.h header whitespace and some structure formatting Jeff Kirsher
2009-10-28  9:50 ` [net-next-2.6 PATCH 17/23] igb: cleanup igb xmit frame path Jeff Kirsher
2009-10-28  9:51 ` [net-next-2.6 PATCH 18/23] igb: cleanup clean_rx_irq_adv and alloc_rx_buffers_adv Jeff Kirsher
2009-10-28  9:51 ` [net-next-2.6 PATCH 19/23] igb: replace unecessary &adapter->hw with just hw where applicable Jeff Kirsher
2009-10-28  9:51 ` [net-next-2.6 PATCH 20/23] igb: add pci_dev in few spots to clean up use of dev_err/info/warn Jeff Kirsher
2009-10-28  9:52 ` [net-next-2.6 PATCH 21/23] igb: limit minimum mtu to 68 to keep ip bound to interface Jeff Kirsher
2009-10-28  9:52 ` [net-next-2.6 PATCH 22/23] igb: open up SCTP checksum offloads to all MACs 82576 and newer Jeff Kirsher
2009-10-28  9:52 ` [net-next-2.6 PATCH 23/23] igb: cleanup whitespace issues in igb_main.c Jeff Kirsher
2009-10-28 10:39 ` [net-next-2.6 PATCH 01/23] igb: add support for seperate tx-usecs setting in ethtool David Miller
2009-10-28 15:42   ` Stephen Hemminger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091028094939.13156.75956.stgit@localhost.localdomain \
    --to=jeffrey.t.kirsher@intel.com \
    --cc=alexander.h.duyck@intel.com \
    --cc=davem@davemloft.net \
    --cc=gospo@redhat.com \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).