From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
Alexander Duyck <alexander.h.duyck@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next-2.6 PATCH 19/23] igb: replace unecessary &adapter->hw with just hw where applicable
Date: Wed, 28 Oct 2009 02:51:35 -0700 [thread overview]
Message-ID: <20091028095134.13156.76163.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091028094540.13156.2637.stgit@localhost.localdomain>
From: Alexander Duyck <alexander.h.duyck@intel.com>
This patch just cleans up some unecessary references to the adapter->hw
member when it has already been placed in a local variable named hw.
Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/igb/igb_main.c | 26 ++++++++++++--------------
1 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index d3e8316..b2c0c97 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -1107,8 +1107,8 @@ int igb_up(struct igb_adapter *adapter)
void igb_down(struct igb_adapter *adapter)
{
- struct e1000_hw *hw = &adapter->hw;
struct net_device *netdev = adapter->netdev;
+ struct e1000_hw *hw = &adapter->hw;
u32 tctl, rctl;
int i;
@@ -1271,10 +1271,10 @@ void igb_reset(struct igb_adapter *adapter)
}
/* Allow time for pending master requests to run */
- adapter->hw.mac.ops.reset_hw(&adapter->hw);
+ hw->mac.ops.reset_hw(hw);
wr32(E1000_WUC, 0);
- if (adapter->hw.mac.ops.init_hw(&adapter->hw))
+ if (hw->mac.ops.init_hw(hw))
dev_err(&adapter->pdev->dev, "Hardware Error\n");
igb_update_mng_vlan(adapter);
@@ -1282,8 +1282,8 @@ void igb_reset(struct igb_adapter *adapter)
/* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */
wr32(E1000_VET, ETHERNET_IEEE_VLAN_TYPE);
- igb_reset_adaptive(&adapter->hw);
- igb_get_phy_info(&adapter->hw);
+ igb_reset_adaptive(hw);
+ igb_get_phy_info(hw);
}
static const struct net_device_ops igb_netdev_ops = {
@@ -1404,8 +1404,6 @@ static int __devinit igb_probe(struct pci_dev *pdev,
hw->subsystem_vendor_id = pdev->subsystem_vendor;
hw->subsystem_device_id = pdev->subsystem_device;
- /* setup the private structure */
- hw->back = adapter;
/* Copy the default MAC, PHY and NVM function pointers */
memcpy(&hw->mac.ops, ei->mac_ops, sizeof(hw->mac.ops));
memcpy(&hw->phy.ops, ei->phy_ops, sizeof(hw->phy.ops));
@@ -1460,7 +1458,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
if (adapter->hw.mac.type == e1000_82576)
netdev->features |= NETIF_F_SCTP_CSUM;
- adapter->en_mng_pt = igb_enable_mng_pass_thru(&adapter->hw);
+ adapter->en_mng_pt = igb_enable_mng_pass_thru(hw);
/* before reading the NVM, reset the controller to put the device in a
* known good starting state */
@@ -1705,8 +1703,8 @@ static void __devexit igb_remove(struct pci_dev *pdev)
unregister_netdev(netdev);
- if (!igb_check_reset_block(&adapter->hw))
- igb_reset_phy(&adapter->hw);
+ if (!igb_check_reset_block(hw))
+ igb_reset_phy(hw);
igb_clear_interrupt_scheme(adapter);
@@ -2928,9 +2926,9 @@ static void igb_watchdog_task(struct work_struct *work)
if (link) {
if (!netif_carrier_ok(netdev)) {
u32 ctrl;
- hw->mac.ops.get_speed_and_duplex(&adapter->hw,
- &adapter->link_speed,
- &adapter->link_duplex);
+ hw->mac.ops.get_speed_and_duplex(hw,
+ &adapter->link_speed,
+ &adapter->link_duplex);
ctrl = rd32(E1000_CTRL);
/* Links status message must follow this format */
@@ -5552,7 +5550,7 @@ static int __igb_shutdown(struct pci_dev *pdev, bool *enable_wake)
wr32(E1000_CTRL, ctrl);
/* Allow time for pending master requests to run */
- igb_disable_pcie_master(&adapter->hw);
+ igb_disable_pcie_master(hw);
wr32(E1000_WUC, E1000_WUC_PME_EN);
wr32(E1000_WUFC, wufc);
next prev parent reply other threads:[~2009-10-28 9:55 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-28 9:45 [net-next-2.6 PATCH 01/23] igb: add support for seperate tx-usecs setting in ethtool Jeff Kirsher
2009-10-28 9:46 ` [net-next-2.6 PATCH 02/23] igb: cleanup some of the code related to hw timestamping Jeff Kirsher
2009-10-28 9:46 ` [net-next-2.6 PATCH 03/23] igb: misc cleanups within igb_ethtool.c Jeff Kirsher
2009-10-28 9:46 ` [net-next-2.6 PATCH 04/23] igb: use packet buffer sizes from RXPBS register Jeff Kirsher
2009-10-28 9:46 ` [net-next-2.6 PATCH 05/23] igb: replace the VF clear_to_send with a flags value Jeff Kirsher
2009-10-28 9:47 ` [net-next-2.6 PATCH 06/23] igb: rework use of VMOLR in regards to PF and VFs Jeff Kirsher
2009-10-28 9:47 ` [net-next-2.6 PATCH 07/23] igb: rework handling of the vfta and vlvf registers in relation to mng_vlan Jeff Kirsher
2009-10-28 9:47 ` [net-next-2.6 PATCH 08/23] igb: move vf init into a seperate function Jeff Kirsher
2009-10-28 9:48 ` [net-next-2.6 PATCH 09/23] igb: only process global stats in igb_update_stats Jeff Kirsher
2009-10-28 9:48 ` [net-next-2.6 PATCH 10/23] igb: move global_quad_port_a from global into local static define Jeff Kirsher
2009-10-28 9:48 ` [net-next-2.6 PATCH 11/23] igb: make tx hang check multiqueue, check eop descriptor Jeff Kirsher
2009-10-28 9:49 ` [net-next-2.6 PATCH 12/23] igb: cleanup code related to ring resource allocation and free Jeff Kirsher
2009-10-28 9:49 ` [net-next-2.6 PATCH 13/23] igb: change queue ordering for 82576 based adapters Jeff Kirsher
2009-10-28 9:49 ` [net-next-2.6 PATCH 14/23] igb: cleanup interrupt enablement in regards to msix_other Jeff Kirsher
2009-10-28 9:50 ` [net-next-2.6 PATCH 15/23] igb: Remove invalid stats counters Jeff Kirsher
2009-10-28 9:50 ` [net-next-2.6 PATCH 16/23] igb: cleanup igb.h header whitespace and some structure formatting Jeff Kirsher
2009-10-28 9:50 ` [net-next-2.6 PATCH 17/23] igb: cleanup igb xmit frame path Jeff Kirsher
2009-10-28 9:51 ` [net-next-2.6 PATCH 18/23] igb: cleanup clean_rx_irq_adv and alloc_rx_buffers_adv Jeff Kirsher
2009-10-28 9:51 ` Jeff Kirsher [this message]
2009-10-28 9:51 ` [net-next-2.6 PATCH 20/23] igb: add pci_dev in few spots to clean up use of dev_err/info/warn Jeff Kirsher
2009-10-28 9:52 ` [net-next-2.6 PATCH 21/23] igb: limit minimum mtu to 68 to keep ip bound to interface Jeff Kirsher
2009-10-28 9:52 ` [net-next-2.6 PATCH 22/23] igb: open up SCTP checksum offloads to all MACs 82576 and newer Jeff Kirsher
2009-10-28 9:52 ` [net-next-2.6 PATCH 23/23] igb: cleanup whitespace issues in igb_main.c Jeff Kirsher
2009-10-28 10:39 ` [net-next-2.6 PATCH 01/23] igb: add support for seperate tx-usecs setting in ethtool David Miller
2009-10-28 15:42 ` Stephen Hemminger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091028095134.13156.76163.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=alexander.h.duyck@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).