test

test

[Simon Kirby]

[-- Attachment #1: Type: text/plain, Size: 1191 bytes --]

Hello!

I was noticing a significant amount of what seems/seemed to be
destination lists with multiple entries with the lblcr LVS algorithm. 
While tracking it down, I think I stumbled over a mistake.  In
ip_vs_lblcr_full_check(), it appears the time check logic is reversed:

        for (i=0, j=tbl->rover; i<IP_VS_LBLCR_TAB_SIZE; i++) {
                j = (j + 1) & IP_VS_LBLCR_TAB_MASK;

                write_lock(&svc->sched_lock);
                list_for_each_entry_safe(en, nxt, &tbl->bucket[j], list) {
                        if (time_after(en->lastuse+sysctl_ip_vs_lblcr_expiration,
                                       now))
                                continue;
                        
                        ip_vs_lblcr_free(en);
                        atomic_dec(&tbl->entries);
                }
                write_unlock(&svc->sched_lock);
        }

Shouldn't this be "time_before"?  It seems that it currently nukes all
recently-used entries every time this function is called, which seems to
be every 30 minutes, rather than removing the not-recently-used ones.

If my reading is correct, this patch should fix it.  Am I missing
something?

Cheers,

Simon-

[-- Attachment #2: lblcr+full_check_time_fix.patch --]
[-- Type: text/x-diff, Size: 535 bytes --]

diff --git a/net/netfilter/ipvs/ip_vs_lblcr.c b/net/netfilter/ipvs/ip_vs_lblcr.c
index 715b57f..937743f 100644
--- a/net/netfilter/ipvs/ip_vs_lblcr.c
+++ b/net/netfilter/ipvs/ip_vs_lblcr.c
@@ -432,7 +432,7 @@ static inline void ip_vs_lblcr_full_check(struct ip_vs_service *svc)
 
 		write_lock(&svc->sched_lock);
 		list_for_each_entry_safe(en, nxt, &tbl->bucket[j], list) {
-			if (time_after(en->lastuse+sysctl_ip_vs_lblcr_expiration,
+			if (time_before(en->lastuse+sysctl_ip_vs_lblcr_expiration,
 				       now))
 				continue;
 

Re: test

[Julian Anastasov]

	Hello,

On Wed, 4 Nov 2009, Simon Kirby wrote:

> Hello!
> 
> I was noticing a significant amount of what seems/seemed to be
> destination lists with multiple entries with the lblcr LVS algorithm. 
> While tracking it down, I think I stumbled over a mistake.  In
> ip_vs_lblcr_full_check(), it appears the time check logic is reversed:
> 
>         for (i=0, j=tbl->rover; i<IP_VS_LBLCR_TAB_SIZE; i++) {
>                 j = (j + 1) & IP_VS_LBLCR_TAB_MASK;
> 
>                 write_lock(&svc->sched_lock);
>                 list_for_each_entry_safe(en, nxt, &tbl->bucket[j], list) {

	If 'time to expire' is after current time then continue,
i.e. current time didn't reached the limit, seems correct,
no need to patch. For better reading and to match
ip_vs_lblcr_check_expire() it can be converted to:

if (time_before(now, en->lastuse+sysctl_ip_vs_lblcr_expiration))
	continue;


>                         if (time_after(en->lastuse+sysctl_ip_vs_lblcr_expiration,
>                                        now))
>                                 continue;
>                         
>                         ip_vs_lblcr_free(en);
>                         atomic_dec(&tbl->entries);
>                 }
>                 write_unlock(&svc->sched_lock);
>         }
> 
> Shouldn't this be "time_before"?  It seems that it currently nukes all
> recently-used entries every time this function is called, which seems to
> be every 30 minutes, rather than removing the not-recently-used ones.
> 
> If my reading is correct, this patch should fix it.  Am I missing
> something?

include/linux/jiffies.h:

time_after(a,b) returns true if the time a is after time b.
#define time_before(a,b)        time_after(b,a)

Regards

--
Julian Anastasov <ja@ssi.bg>

Re: test

[Simon Kirby]

On Thu, Nov 05, 2009 at 11:26:27AM +0200, Julian Anastasov wrote:

> 	If 'time to expire' is after current time then continue,
> i.e. current time didn't reached the limit, seems correct,
> no need to patch. For better reading and to match
> ip_vs_lblcr_check_expire() it can be converted to:
> 
> if (time_before(now, en->lastuse+sysctl_ip_vs_lblcr_expiration))
> 	continue;

D'oh.  I noticed the use of time_before() further down in
ip_vs_lblcr_check_expire(), but not the reversed arguments, hence my
confusion.

I still suspect there may be something not quite right, or which could
perhaps do with some tuning.  It's difficult to see exactly how it's
working internally, since there's currently nothing to get a summary of
the dest_sets to userspace.  I'll follow up if I find anything.

Simon-

Re: [syzbot] [bpf?] KASAN: slab-out-of-bounds Write in __bpf_get_stackid

[syzbot]

syzbot has found a reproducer for the following issue on:

HEAD commit:    5b4c54ac49af bpf: Fix various typos in verifier.c comments
git tree:       bpf-next
console+strace: https://syzkaller.appspot.com/x/log.txt?x=17441782580000
kernel config:  https://syzkaller.appspot.com/x/.config?x=934611ae034ab218
dashboard link: https://syzkaller.appspot.com/bug?extid=c9b724fbb41cf2538b7b
compiler:       Debian clang version 20.1.7 (++20250616065708+6146a88f6049-1~exp1~20250616065826.132), Debian LLD 20.1.7
syz repro:      https://syzkaller.appspot.com/x/repro.syz?x=16f294a2580000
C reproducer:   https://syzkaller.appspot.com/x/repro.c?x=14349034580000

Downloadable assets:
disk image: https://storage.googleapis.com/syzbot-assets/5a5cfac28d08/disk-5b4c54ac.raw.xz
vmlinux: https://storage.googleapis.com/syzbot-assets/bb5b9f9f1b33/vmlinux-5b4c54ac.xz
kernel image: https://storage.googleapis.com/syzbot-assets/14b928da2760/bzImage-5b4c54ac.xz

IMPORTANT: if you fix the issue, please add the following tag to the commit:
Reported-by: syzbot+c9b724fbb41cf2538b7b@syzkaller.appspotmail.com

==================================================================
BUG: KASAN: slab-out-of-bounds in __bpf_get_stackid+0x677/0xcf0 kernel/bpf/stackmap.c:265
Write of size 8 at addr ffff8880439aa258 by task syz-executor265/6114

CPU: 1 UID: 0 PID: 6114 Comm: syz-executor265 Not tainted 6.16.0-rc6-syzkaller-g5b4c54ac49af #0 PREEMPT(full) 
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
Call Trace:
 <IRQ>
 dump_stack_lvl+0x189/0x250 lib/dump_stack.c:120
 print_address_description mm/kasan/report.c:378 [inline]
 print_report+0xca/0x230 mm/kasan/report.c:480
 kasan_report+0x118/0x150 mm/kasan/report.c:593
 __bpf_get_stackid+0x677/0xcf0 kernel/bpf/stackmap.c:265
 ____bpf_get_stackid_raw_tp kernel/trace/bpf_trace.c:1810 [inline]
 bpf_get_stackid_raw_tp+0x196/0x210 kernel/trace/bpf_trace.c:1799
 bpf_prog_b724608cae728045+0x27/0x2f
 bpf_dispatcher_nop_func include/linux/bpf.h:1322 [inline]
 __bpf_prog_run include/linux/filter.h:718 [inline]
 bpf_prog_run include/linux/filter.h:725 [inline]
 __bpf_trace_run kernel/trace/bpf_trace.c:2257 [inline]
 bpf_trace_run2+0x284/0x4b0 kernel/trace/bpf_trace.c:2298
 __do_trace_kfree include/trace/events/kmem.h:94 [inline]
 trace_kfree include/trace/events/kmem.h:94 [inline]
 kfree+0x3a0/0x440 mm/slub.c:4829
 slab_free_after_rcu_debug+0x60/0x2a0 mm/slub.c:4680
 rcu_do_batch kernel/rcu/tree.c:2576 [inline]
 rcu_core+0xca8/0x1710 kernel/rcu/tree.c:2832
 handle_softirqs+0x283/0x870 kernel/softirq.c:579
 __do_softirq kernel/softirq.c:613 [inline]
 invoke_softirq kernel/softirq.c:453 [inline]
 __irq_exit_rcu+0xca/0x1f0 kernel/softirq.c:680
 irq_exit_rcu+0x9/0x30 kernel/softirq.c:696
 instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1050 [inline]
 sysvec_apic_timer_interrupt+0xa6/0xc0 arch/x86/kernel/apic/apic.c:1050
 </IRQ>
 <TASK>
 asm_sysvec_apic_timer_interrupt+0x1a/0x20 arch/x86/include/asm/idtentry.h:702
RIP: 0010:xas_load+0xd9/0x5b0 lib/xarray.c:244
Code: 42 0f b6 04 28 84 c0 0f 85 3a 04 00 00 49 8d 5e fe 48 8b 44 24 08 0f b6 28 48 89 d8 48 c1 e8 03 48 89 44 24 20 42 0f b6 04 28 <84> c0 0f 85 34 04 00 00 44 0f b6 23 44 0f b6 fd 44 89 ff 44 89 e6
RSP: 0000:ffffc9000459f898 EFLAGS: 00000a02
RAX: 0000000000000000 RBX: ffff888025438840 RCX: ffff88807c050000
RDX: 0000000000000000 RSI: 0000000000000002 RDI: 0000000000000002
RBP: 0000000000000000 R08: ffff88807c050000 R09: 0000000000000002
R10: 0000000000000003 R11: 0000000000000000 R12: ffffc9000459fb32
R13: dffffc0000000000 R14: ffff888025438842 R15: 0000000000000002
 xas_find+0x157/0x990 lib/xarray.c:1406
 next_uptodate_folio+0x32/0x5d0 mm/filemap.c:3562
 filemap_map_pages+0x21f/0x1740 mm/filemap.c:3714
 do_fault_around mm/memory.c:5548 [inline]
 do_read_fault mm/memory.c:5581 [inline]
 do_fault mm/memory.c:5724 [inline]
 do_pte_missing mm/memory.c:4251 [inline]
 handle_pte_fault mm/memory.c:6069 [inline]
 __handle_mm_fault+0x3687/0x5620 mm/memory.c:6212
 handle_mm_fault+0x40a/0x8e0 mm/memory.c:6381
 do_user_addr_fault+0xa81/0x1390 arch/x86/mm/fault.c:1336
 handle_page_fault arch/x86/mm/fault.c:1476 [inline]
 exc_page_fault+0x76/0xf0 arch/x86/mm/fault.c:1532
 asm_exc_page_fault+0x26/0x30 arch/x86/include/asm/idtentry.h:623
RIP: 0033:0x7f3d52e29438
Code: Unable to access opcode bytes at 0x7f3d52e2940e.
RSP: 002b:00007fff46c399c8 EFLAGS: 00010206
RAX: 00007f3d52e59ad8 RBX: 0000000000000000 RCX: 0000000000000004
RDX: 00007f3d52e5ad00 RSI: 0000000000000000 RDI: 00007f3d52e59ad8
RBP: 00007f3d52e58118 R08: 00007fff46c39a3c R09: 00007fff46c39a3c
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f3d52e5ace8
R13: 0000000000000000 R14: 00007f3d52e5ad00 R15: 00007f3d52db0290
 </TASK>

Allocated by task 6114:
 kasan_save_stack mm/kasan/common.c:47 [inline]
 kasan_save_track+0x3e/0x80 mm/kasan/common.c:68
 poison_kmalloc_redzone mm/kasan/common.c:377 [inline]
 __kasan_kmalloc+0x93/0xb0 mm/kasan/common.c:394
 kasan_kmalloc include/linux/kasan.h:260 [inline]
 __do_kmalloc_node mm/slub.c:4328 [inline]
 __kmalloc_node_noprof+0x276/0x4e0 mm/slub.c:4334
 kmalloc_node_noprof include/linux/slab.h:932 [inline]
 __bpf_map_area_alloc kernel/bpf/syscall.c:391 [inline]
 bpf_map_area_alloc+0x64/0x180 kernel/bpf/syscall.c:404
 prealloc_elems_and_freelist+0x86/0x1d0 kernel/bpf/stackmap.c:51
 stack_map_alloc+0x33f/0x4c0 kernel/bpf/stackmap.c:114
 map_create+0xaa0/0x1310 kernel/bpf/syscall.c:1477
 __sys_bpf+0x60f/0x870 kernel/bpf/syscall.c:6004
 __do_sys_bpf kernel/bpf/syscall.c:6132 [inline]
 __se_sys_bpf kernel/bpf/syscall.c:6130 [inline]
 __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:6130
 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
 do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

The buggy address belongs to the object at ffff8880439aa000
 which belongs to the cache kmalloc-1k of size 1024
The buggy address is located 24 bytes to the right of
 allocated 576-byte region [ffff8880439aa000, ffff8880439aa240)

The buggy address belongs to the physical page:
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x439a8
head: order:3 mapcount:0 entire_mapcount:0 nr_pages_mapped:0 pincount:0
anon flags: 0xfff00000000040(head|node=0|zone=1|lastcpupid=0x7ff)
page_type: f5(slab)
raw: 00fff00000000040 ffff88801a441dc0 0000000000000000 dead000000000001
raw: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 00fff00000000040 ffff88801a441dc0 0000000000000000 dead000000000001
head: 0000000000000000 0000000080100010 00000000f5000000 0000000000000000
head: 00fff00000000003 ffffea00010e6a01 00000000ffffffff 00000000ffffffff
head: ffffffffffffffff 0000000000000000 00000000ffffffff 0000000000000008
page dumped because: kasan: bad access detected
page_owner tracks the page as allocated
page last allocated via order 3, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NOWARN|__GFP_NORETRY|__GFP_COMP|__GFP_NOMEMALLOC), pid 5514, tgid 5514 (dhcpcd), ts 48384102667, free_ts 48383277611
 set_page_owner include/linux/page_owner.h:32 [inline]
 post_alloc_hook+0x240/0x2a0 mm/page_alloc.c:1704
 prep_new_page mm/page_alloc.c:1712 [inline]
 get_page_from_freelist+0x21e4/0x22c0 mm/page_alloc.c:3669
 __alloc_frozen_pages_noprof+0x181/0x370 mm/page_alloc.c:4959
 alloc_pages_mpol+0x232/0x4a0 mm/mempolicy.c:2419
 alloc_slab_page mm/slub.c:2451 [inline]
 allocate_slab+0x8a/0x3b0 mm/slub.c:2619
 new_slab mm/slub.c:2673 [inline]
 ___slab_alloc+0xbfc/0x1480 mm/slub.c:3859
 __slab_alloc mm/slub.c:3949 [inline]
 __slab_alloc_node mm/slub.c:4024 [inline]
 slab_alloc_node mm/slub.c:4185 [inline]
 __do_kmalloc_node mm/slub.c:4327 [inline]
 __kmalloc_noprof+0x305/0x4f0 mm/slub.c:4340
 kmalloc_noprof include/linux/slab.h:909 [inline]
 load_elf_phdrs fs/binfmt_elf.c:525 [inline]
 load_elf_binary+0x2cd/0x2790 fs/binfmt_elf.c:854
 search_binary_handler fs/exec.c:1670 [inline]
 exec_binprm fs/exec.c:1702 [inline]
 bprm_execve+0x999/0x1450 fs/exec.c:1754
 do_execveat_common+0x510/0x6a0 fs/exec.c:1860
 do_execve fs/exec.c:1934 [inline]
 __do_sys_execve fs/exec.c:2010 [inline]
 __se_sys_execve fs/exec.c:2005 [inline]
 __x64_sys_execve+0x94/0xb0 fs/exec.c:2005
 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
 do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
page last free pid 5514 tgid 5514 stack trace:
 reset_page_owner include/linux/page_owner.h:25 [inline]
 free_pages_prepare mm/page_alloc.c:1248 [inline]
 __free_frozen_pages+0xc71/0xe70 mm/page_alloc.c:2706
 discard_slab mm/slub.c:2717 [inline]
 __put_partials+0x161/0x1c0 mm/slub.c:3186
 put_cpu_partial+0x17c/0x250 mm/slub.c:3261
 __slab_free+0x2f7/0x400 mm/slub.c:4513
 qlink_free mm/kasan/quarantine.c:163 [inline]
 qlist_free_all+0x97/0x140 mm/kasan/quarantine.c:179
 kasan_quarantine_reduce+0x148/0x160 mm/kasan/quarantine.c:286
 __kasan_slab_alloc+0x22/0x80 mm/kasan/common.c:329
 kasan_slab_alloc include/linux/kasan.h:250 [inline]
 slab_post_alloc_hook mm/slub.c:4148 [inline]
 slab_alloc_node mm/slub.c:4197 [inline]
 __do_kmalloc_node mm/slub.c:4327 [inline]
 __kmalloc_noprof+0x224/0x4f0 mm/slub.c:4340
 kmalloc_noprof include/linux/slab.h:909 [inline]
 tomoyo_add_entry security/tomoyo/common.c:2132 [inline]
 tomoyo_supervisor+0xbd5/0x1480 security/tomoyo/common.c:2204
 tomoyo_audit_env_log security/tomoyo/environ.c:36 [inline]
 tomoyo_env_perm+0x149/0x1e0 security/tomoyo/environ.c:63
 tomoyo_environ security/tomoyo/domain.c:672 [inline]
 tomoyo_find_next_domain+0x15cf/0x1aa0 security/tomoyo/domain.c:888
 tomoyo_bprm_check_security+0x11c/0x180 security/tomoyo/tomoyo.c:102
 security_bprm_check+0x89/0x270 security/security.c:1302
 search_binary_handler fs/exec.c:1660 [inline]
 exec_binprm fs/exec.c:1702 [inline]
 bprm_execve+0x8ee/0x1450 fs/exec.c:1754
 do_execveat_common+0x510/0x6a0 fs/exec.c:1860
 do_execve fs/exec.c:1934 [inline]
 __do_sys_execve fs/exec.c:2010 [inline]
 __se_sys_execve fs/exec.c:2005 [inline]
 __x64_sys_execve+0x94/0xb0 fs/exec.c:2005

Memory state around the buggy address:
 ffff8880439aa100: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 ffff8880439aa180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffff8880439aa200: 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc
                                                    ^
 ffff8880439aa280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff8880439aa300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
==================================================================
----------------
Code disassembly (best guess):
   0:	42 0f b6 04 28       	movzbl (%rax,%r13,1),%eax
   5:	84 c0                	test   %al,%al
   7:	0f 85 3a 04 00 00    	jne    0x447
   d:	49 8d 5e fe          	lea    -0x2(%r14),%rbx
  11:	48 8b 44 24 08       	mov    0x8(%rsp),%rax
  16:	0f b6 28             	movzbl (%rax),%ebp
  19:	48 89 d8             	mov    %rbx,%rax
  1c:	48 c1 e8 03          	shr    $0x3,%rax
  20:	48 89 44 24 20       	mov    %rax,0x20(%rsp)
  25:	42 0f b6 04 28       	movzbl (%rax,%r13,1),%eax
* 2a:	84 c0                	test   %al,%al <-- trapping instruction
  2c:	0f 85 34 04 00 00    	jne    0x466
  32:	44 0f b6 23          	movzbl (%rbx),%r12d
  36:	44 0f b6 fd          	movzbl %bpl,%r15d
  3a:	44 89 ff             	mov    %r15d,%edi
  3d:	44 89 e6             	mov    %r12d,%esi


---
If you want syzbot to run the reproducer, reply with:
#syz test: git://repo/address.git branch-or-commit-hash
If you attach or paste a git patch, syzbot will apply it before testing.

test

[Arnaud lecomte]

#syz test

diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c
index 3615c06b7dfa..c0ee51db8eed 100644
--- a/kernel/bpf/stackmap.c

 BPF_CALL_3(bpf_get_stackid, struct pt_regs *, regs, struct bpf_map *, map,
           u64, flags)
 {
-       u32 max_depth = map->value_size / stack_map_data_size(map);
-       u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
+       u32 elem_size = stack_map_data_size(map);
        bool user = flags & BPF_F_USER_STACK;
        struct perf_callchain_entry *trace;
        bool kernel = !user;
+       u32 max_depth;

        if (unlikely(flags & ~(BPF_F_SKIP_FIELD_MASK | BPF_F_USER_STACK |
                               BPF_F_FAST_STACK_CMP | BPF_F_REUSE_STACKID)))
                return -EINVAL;

-       max_depth += skip;
-       if (max_depth > sysctl_perf_event_max_stack)
-               max_depth = sysctl_perf_event_max_stack;
-
+       max_depth = stack_map_calculate_max_depth(map->value_size, elem_size, flags);
        trace = get_perf_callchain(regs, 0, kernel, user, max_depth,
                                   false, false);

@@ -371,15 +391,11 @@ BPF_CALL_3(bpf_get_stackid_pe, struct bpf_perf_event_data_kern *, ctx,
                return -EFAULT;

        nr_kernel = count_kernel_ip(trace);
+       __u64 nr = trace->nr; /* save original */

        if (kernel) {
-               __u64 nr = trace->nr;
-
                trace->nr = nr_kernel;
                ret = __bpf_get_stackid(map, trace, flags);
-
-               /* restore nr */
-               trace->nr = nr;
        } else { /* user */
                u64 skip = flags & BPF_F_SKIP_FIELD_MASK;

@@ -390,6 +406,10 @@ BPF_CALL_3(bpf_get_stackid_pe, struct bpf_perf_event_data_kern *, ctx,
                flags = (flags & ~BPF_F_SKIP_FIELD_MASK) | skip;
                ret = __bpf_get_stackid(map, trace, flags);
        }
+
+       /* restore nr */
+       trace->nr = nr;
+
        return ret;
 }

@@ -406,7 +426,7 @@ static long __bpf_get_stack(struct pt_regs *regs, struct task_struct *task,
                            struct perf_callchain_entry *trace_in,
                            void *buf, u32 size, u64 flags, bool may_fault)
 {
-       u32 trace_nr, copy_len, elem_size, num_elem, max_depth;
+       u32 trace_nr, copy_len, elem_size, max_depth;
        bool user_build_id = flags & BPF_F_USER_BUILD_ID;
        bool crosstask = task && task != current;
        u32 skip = flags & BPF_F_SKIP_FIELD_MASK;
@@ -438,21 +458,20 @@ static long __bpf_get_stack(struct pt_regs *regs, struct task_struct *task,
                goto clear;
        }

-       num_elem = size / elem_size;
-       max_depth = num_elem + skip;
-       if (sysctl_perf_event_max_stack < max_depth)
-               max_depth = sysctl_perf_event_max_stack;
+       max_depth = stack_map_calculate_max_depth(size, elem_size, flags);

        if (may_fault)
                rcu_read_lock(); /* need RCU for perf's callchain below */

-       if (trace_in)
+       if (trace_in) {
                trace = trace_in;
-       else if (kernel && task)
+               trace->nr = min_t(u32, trace->nr, max_depth);
+       } else if (kernel && task) {
                trace = get_callchain_entry_for_task(task, max_depth);
-       else
+       } else {
                trace = get_perf_callchain(regs, 0, kernel, user, max_depth,
                                           crosstask, false);
+       }

        if (unlikely(!trace) || trace->nr < skip) {
                if (may_fault)
@@ -461,7 +480,6 @@ static long __bpf_get_stack(struct pt_regs *regs, struct task_struct *task,
        }

        trace_nr = trace->nr - skip;
-       trace_nr = (trace_nr <= num_elem) ? trace_nr : num_elem;
        copy_len = trace_nr * elem_size;

        ips = trace->ip + skip;
--
2.47.3

[PATCH] taprio: Set the value of picos_per_byte before fill sched_entry

[jianghaoran]

If the value of picos_per_byte is set after fill sched_entry,
as a result, the min_duration calculated by length_to_duration is 0,
and the validity of the input interval cannot be judged,
too small intervals couldn't allow any packet to be transmitted.
It will appear like commit b5b73b26b3ca ("taprio:
Fix allowing too small intervals") described problem.
Here is a further modification of this problem.

example:

tc qdisc replace dev enp5s0f0 parent root handle 100 taprio \
              num_tc 3 \
              map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
              queues 1@0 1@1 2@2 \
              base-time  1528743495910289987 \
              sched-entry S 01 9 \
	      sched-entry S 02 9 \
	      sched-entry S 04 9 \
              clockid CLOCK_TAI

Signed-off-by: jianghaoran <jianghaoran@kylinos.cn>
---
 net/sched/sch_taprio.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/net/sched/sch_taprio.c b/net/sched/sch_taprio.c
index 86675a79da1e..d95ec2250f24 100644
--- a/net/sched/sch_taprio.c
+++ b/net/sched/sch_taprio.c
@@ -1507,6 +1507,8 @@ static int taprio_change(struct Qdisc *sch, struct nlattr *opt,
 		goto free_sched;
 	}
 
+	taprio_set_picos_per_byte(dev, q);
+
 	err = parse_taprio_schedule(q, tb, new_admin, extack);
 	if (err < 0)
 		goto free_sched;
@@ -1521,8 +1523,6 @@ static int taprio_change(struct Qdisc *sch, struct nlattr *opt,
 	if (err < 0)
 		goto free_sched;
 
-	taprio_set_picos_per_byte(dev, q);
-
 	if (mqprio) {
 		err = netdev_set_num_tc(dev, mqprio->num_tc);
 		if (err)
-- 
2.25.1

Re: [PATCH] taprio: Set the value of picos_per_byte before fill sched_entry

[Jakub Kicinski]

On Wed, 28 Sep 2022 14:58:30 +0800 jianghaoran wrote:
> If the value of picos_per_byte is set after fill sched_entry,
> as a result, the min_duration calculated by length_to_duration is 0,
> and the validity of the input interval cannot be judged,
> too small intervals couldn't allow any packet to be transmitted.

Meaning an invalid configuration is accepted but no packets
can ever be transmitted?  Could you make the user-visible 
issue clearer?

> It will appear like commit b5b73b26b3ca ("taprio:
> Fix allowing too small intervals") described problem.
> Here is a further modification of this problem.
> 
> example:

Here as well it seems worthwhile to mention what this is an example of.
e.g. "example configuration which will not be able to transmit packets"

> tc qdisc replace dev enp5s0f0 parent root handle 100 taprio \
>               num_tc 3 \
>               map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
>               queues 1@0 1@1 2@2 \
>               base-time  1528743495910289987 \
>               sched-entry S 01 9 \
> 	      sched-entry S 02 9 \
> 	      sched-entry S 04 9 \
>               clockid CLOCK_TAI

Please add a Fixes tag pointing to the first commit where the issue was
present, and CC Vladimir Oltean <vladimir.oltean@nxp.com> on the next
version.

test

[jianghaoran]

test

[Rain River]

Please ignore it.

test

[Ding Tianhong]

test

test

[lkernmnet]

tttttttttttttttttt

test

[Vlad Yasevich]

test

[Jacky Hsiao]