[PATCH 0/6] Misc driver fixes for 2.6.32

[PATCH 0/6] Misc driver fixes for 2.6.32

[Ralf Baechle]

This is a series of patches which 

  o 1/6, 2/6, 3/6: Fixes for the Octeon ethernet driver in drivers/staging.
    The Octeon is a MIPS-based SOC so with permisson from Greg I'm merging
    these via the MIPS tree.
  o 4/6: A fix to a MIPS-specific SPI driver.  Posted before, no comments
    were received.
  o 5/6: A fix to the resource allocation to the framebuffer of the MIPS-
    based SGI O2 and i686-based Visual Workstation.  Also posted before, no
    comments were received.
  o 6/6: A fix to the serial driver for the BCM63xx which is a MIPS-based
    SOC.

  Ralf

[PATCH 1/6] Staging: Octeon: Fix compile error in drivers/staging/octeon/ethernet-mdio.c

[Ralf Baechle]

[-- Attachment #1: 0002.patch --]
[-- Type: text/plain, Size: 960 bytes --]

From: David Daney <ddaney@caviumnetworks.com>

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/staging/octeon/ethernet-mdio.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: upstream-linus/drivers/staging/octeon/ethernet-mdio.c
===================================================================
--- upstream-linus.orig/drivers/staging/octeon/ethernet-mdio.c
+++ upstream-linus/drivers/staging/octeon/ethernet-mdio.c
@@ -170,7 +170,7 @@ static u32 cvm_oct_get_link(struct net_d
 	return ret;
 }
 
-struct const ethtool_ops cvm_oct_ethtool_ops = {
+const struct ethtool_ops cvm_oct_ethtool_ops = {
 	.get_drvinfo = cvm_oct_get_drvinfo,
 	.get_settings = cvm_oct_get_settings,
 	.set_settings = cvm_oct_set_settings,

[PATCH 2/6] Staging: Octeon: Use symbolic values for irq numbers.

[Ralf Baechle]

[-- Attachment #1: 0003.patch --]
[-- Type: text/plain, Size: 1062 bytes --]

From: David Daney <ddaney@caviumnetworks.com>

In addition to being magic numbers, the irq number passed to free_irq
is incorrect.  We need to use the correct symbolic value instead.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/staging/octeon/ethernet-spi.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: upstream-linus/drivers/staging/octeon/ethernet-spi.c
===================================================================
--- upstream-linus.orig/drivers/staging/octeon/ethernet-spi.c
+++ upstream-linus/drivers/staging/octeon/ethernet-spi.c
@@ -317,6 +317,6 @@ void cvm_oct_spi_uninit(struct net_devic
 			cvmx_write_csr(CVMX_SPXX_INT_MSK(interface), 0);
 			cvmx_write_csr(CVMX_STXX_INT_MSK(interface), 0);
 		}
-		free_irq(8 + 46, &number_spi_ports);
+		free_irq(OCTEON_IRQ_RML, &number_spi_ports);
 	}
 }

[PATCH 3/6] Staging: octeon-ethernet: Assign proper MAC addresses.

[Ralf Baechle]

[-- Attachment #1: 0004.patch --]
[-- Type: text/plain, Size: 4018 bytes --]

From: David Daney <ddaney@caviumnetworks.com>

Allocate MAC addresses using the same method as the bootloader.  This
avoids changing the MAC between bootloader and kernel operation as
well as avoiding duplicates and use of addresses outside of the
assigned range.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: devel@driverdev.osuosl.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: netdev@vger.kernel.org
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

 drivers/staging/octeon/ethernet.c |   53 +++++++++++++++++++++++++++++---------
 1 file changed, 41 insertions(+), 12 deletions(-)

Index: upstream-linus/drivers/staging/octeon/ethernet.c
===================================================================
--- upstream-linus.orig/drivers/staging/octeon/ethernet.c
+++ upstream-linus/drivers/staging/octeon/ethernet.c
@@ -111,6 +111,16 @@ MODULE_PARM_DESC(disable_core_queueing, 
 	"\tallows packets to be sent without lock contention in the packet\n"
 	"\tscheduler resulting in some cases in improved throughput.\n");
 
+
+/*
+ * The offset from mac_addr_base that should be used for the next port
+ * that is configured.  By convention, if any mgmt ports exist on the
+ * chip, they get the first mac addresses, The ports controlled by
+ * this driver are numbered sequencially following any mgmt addresses
+ * that may exist.
+ */
+static unsigned int cvm_oct_mac_addr_offset;
+
 /**
  * Periodic timer to check auto negotiation
  */
@@ -474,16 +484,30 @@ static int cvm_oct_common_set_mac_addres
  */
 int cvm_oct_common_init(struct net_device *dev)
 {
-	static int count;
-	char mac[8] = { 0x00, 0x00,
-		octeon_bootinfo->mac_addr_base[0],
-		octeon_bootinfo->mac_addr_base[1],
-		octeon_bootinfo->mac_addr_base[2],
-		octeon_bootinfo->mac_addr_base[3],
-		octeon_bootinfo->mac_addr_base[4],
-		octeon_bootinfo->mac_addr_base[5] + count
-	};
 	struct octeon_ethernet *priv = netdev_priv(dev);
+	struct sockaddr sa;
+	u64 mac = ((u64)(octeon_bootinfo->mac_addr_base[0] & 0xff) << 40) |
+		((u64)(octeon_bootinfo->mac_addr_base[1] & 0xff) << 32) |
+		((u64)(octeon_bootinfo->mac_addr_base[2] & 0xff) << 24) |
+		((u64)(octeon_bootinfo->mac_addr_base[3] & 0xff) << 16) |
+		((u64)(octeon_bootinfo->mac_addr_base[4] & 0xff) << 8) |
+		(u64)(octeon_bootinfo->mac_addr_base[5] & 0xff);
+
+	mac += cvm_oct_mac_addr_offset;
+	sa.sa_data[0] = (mac >> 40) & 0xff;
+	sa.sa_data[1] = (mac >> 32) & 0xff;
+	sa.sa_data[2] = (mac >> 24) & 0xff;
+	sa.sa_data[3] = (mac >> 16) & 0xff;
+	sa.sa_data[4] = (mac >> 8) & 0xff;
+	sa.sa_data[5] = mac & 0xff;
+
+	if (cvm_oct_mac_addr_offset >= octeon_bootinfo->mac_addr_count)
+		printk(KERN_DEBUG "%s: Using MAC outside of the assigned range:"
+			" %02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
+			sa.sa_data[0] & 0xff, sa.sa_data[1] & 0xff,
+			sa.sa_data[2] & 0xff, sa.sa_data[3] & 0xff,
+			sa.sa_data[4] & 0xff, sa.sa_data[5] & 0xff);
+	cvm_oct_mac_addr_offset++;
 
 	/*
 	 * Force the interface to use the POW send if always_use_pow
@@ -496,14 +520,12 @@ int cvm_oct_common_init(struct net_devic
 	if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM)
 		dev->features |= NETIF_F_IP_CSUM;
 
-	count++;
-
 	/* We do our own locking, Linux doesn't need to */
 	dev->features |= NETIF_F_LLTX;
 	SET_ETHTOOL_OPS(dev, &cvm_oct_ethtool_ops);
 
 	cvm_oct_mdio_setup_device(dev);
-	dev->netdev_ops->ndo_set_mac_address(dev, mac);
+	dev->netdev_ops->ndo_set_mac_address(dev, &sa);
 	dev->netdev_ops->ndo_change_mtu(dev, dev->mtu);
 
 	/*
@@ -620,6 +642,13 @@ static int __init cvm_oct_init_module(vo
 
 	pr_notice("cavium-ethernet %s\n", OCTEON_ETHERNET_VERSION);
 
+	if (OCTEON_IS_MODEL(OCTEON_CN52XX))
+		cvm_oct_mac_addr_offset = 2; /* First two are the mgmt ports. */
+	else if (OCTEON_IS_MODEL(OCTEON_CN56XX))
+		cvm_oct_mac_addr_offset = 1; /* First one is the mgmt port. */
+	else
+		cvm_oct_mac_addr_offset = 0;
+
 	cvm_oct_proc_initialize();
 	cvm_oct_rx_initialize();
 	cvm_oct_configure_common_hw();