From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
Don Skidmore <donald.c.skidmore@intel.com>,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-2.6 PATCH 3/3] ixgbe: fix traffic hangs on Tx with ioatdma loaded
Date: Fri, 06 Nov 2009 14:56:20 -0800 [thread overview]
Message-ID: <20091106225620.28063.96209.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091106225526.28063.83720.stgit@localhost.localdomain>
From: Don Skidmore <donald.c.skidmore@intel.com>
When ioatdma was loaded we we were unable to transmit traffic. We weren't
using the correct registers in ixgbe_update_tx_dca for 82599 systems.
Likewise in ixgbe_configure_tx() we weren't disabling the arbiter before
modifying MTQC.
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_main.c | 27 +++++++++++++++++++++++----
1 files changed, 23 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index 2d0f618..5bd9e6b 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -44,6 +44,7 @@
#include "ixgbe.h"
#include "ixgbe_common.h"
+#include "ixgbe_dcb_82599.h"
char ixgbe_driver_name[] = "ixgbe";
static const char ixgbe_driver_string[] =
@@ -462,19 +463,23 @@ static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter,
u32 txctrl;
int cpu = get_cpu();
int q = tx_ring - adapter->tx_ring;
+ struct ixgbe_hw *hw = &adapter->hw;
if (tx_ring->cpu != cpu) {
- txctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q));
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(q));
txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK;
txctrl |= dca3_get_tag(&adapter->pdev->dev, cpu);
+ txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(q), txctrl);
} else if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
+ txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(q));
txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599;
txctrl |= (dca3_get_tag(&adapter->pdev->dev, cpu) <<
- IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+ IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599);
+ txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
+ IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(q), txctrl);
}
- txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN;
- IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_TXCTRL(q), txctrl);
tx_ring->cpu = cpu;
}
put_cpu();
@@ -1963,11 +1968,25 @@ static void ixgbe_configure_tx(struct ixgbe_adapter *adapter)
break;
}
}
+
if (hw->mac.type == ixgbe_mac_82599EB) {
+ u32 rttdcs;
+
+ /* disable the arbiter while setting MTQC */
+ rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
+ rttdcs |= IXGBE_RTTDCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
+
/* We enable 8 traffic classes, DCB only */
if (adapter->flags & IXGBE_FLAG_DCB_ENABLED)
IXGBE_WRITE_REG(hw, IXGBE_MTQC, (IXGBE_MTQC_RT_ENA |
IXGBE_MTQC_8TC_8TQ));
+ else
+ IXGBE_WRITE_REG(hw, IXGBE_MTQC, IXGBE_MTQC_64Q_1PB);
+
+ /* re-eable the arbiter */
+ rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
+ IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
}
}
next prev parent reply other threads:[~2009-11-06 22:56 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-11-06 22:55 [net-2.6 PATCH 1/3] ixgbe: Fix gso_max_size for 82599 when DCB is enabled Jeff Kirsher
2009-11-06 22:56 ` [net-2.6 PATCH 2/3] ixgbe: Fix checking TFCS register for TXOFF status " Jeff Kirsher
2009-11-07 4:34 ` David Miller
2009-11-06 22:56 ` Jeff Kirsher [this message]
2009-11-07 4:34 ` [net-2.6 PATCH 3/3] ixgbe: fix traffic hangs on Tx with ioatdma loaded David Miller
2009-11-07 4:34 ` [net-2.6 PATCH 1/3] ixgbe: Fix gso_max_size for 82599 when DCB is enabled David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091106225620.28063.96209.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=donald.c.skidmore@intel.com \
--cc=gospo@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=peter.p.waskiewicz.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox