From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com,
Jesse Brandeburg <jesse.brandeburg@intel.com>,
Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [net-next-2.6 PATCH 5/5] ixgbe: use EIAM to automask MSI-X
Date: Thu, 03 Dec 2009 13:33:54 -0800 [thread overview]
Message-ID: <20091203213353.9291.64013.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091203213221.9291.34218.stgit@localhost.localdomain>
From: Jesse Brandeburg <jesse.brandeburg@intel.com>
when disabling interrupts, driver was writing with IO, this is no
necessary because on ixgbe parts the hardware can "oneshot"
disable and clear the interrupt. So on 82598/82599 use of EIAM
should avoid one posted write per interrupt when in MSI-X mode.
This should improve performance and seems to in my limited
testing, reduce CPU utilization VERY slightly.
Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_main.c | 25 +++++++++++++++++++------
1 files changed, 19 insertions(+), 6 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index db05030..247ed2a 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -1329,8 +1329,7 @@ static irqreturn_t ixgbe_msix_clean_tx(int irq, void *data)
r_idx + 1);
}
- /* disable interrupts on this vector only */
- ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
+ /* EIAM disabled interrupts (on this vector) for us */
napi_schedule(&q_vector->napi);
return IRQ_HANDLED;
@@ -1362,7 +1361,7 @@ static irqreturn_t ixgbe_msix_clean_rx(int irq, void *data)
return IRQ_HANDLED;
/* disable interrupts on this vector only */
- ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
+ /* EIAM disabled interrupts (on this vector) for us */
napi_schedule(&q_vector->napi);
return IRQ_HANDLED;
@@ -1397,8 +1396,7 @@ static irqreturn_t ixgbe_msix_clean_many(int irq, void *data)
r_idx + 1);
}
- /* disable interrupts on this vector only */
- ixgbe_irq_disable_queues(adapter, ((u64)1 << q_vector->v_idx));
+ /* EIAM disabled interrupts (on this vector) for us */
napi_schedule(&q_vector->napi);
return IRQ_HANDLED;
@@ -2716,7 +2714,22 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter)
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
}
- if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) {
+ if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) {
+ /*
+ * use EIAM to auto-mask when MSI-X interrupt is asserted
+ * this saves a register write for every interrupt
+ */
+ switch (hw->mac.type) {
+ case ixgbe_mac_82598EB:
+ IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
+ break;
+ default:
+ case ixgbe_mac_82599EB:
+ IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF);
+ IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF);
+ break;
+ }
+ } else {
/* legacy interrupts, use EIAM to auto-mask when reading EICR,
* specifically only auto mask tx and rx interrupts */
IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
next prev parent reply other threads:[~2009-12-03 21:34 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-03 21:32 [net-next-2.6 PATCH 1/5] ixgbe: use known user priority for FCoE when DCB is enabled Jeff Kirsher
2009-12-03 21:32 ` [net-next-2.6 PATCH 2/5] ixgbe: select FCoE Tx queue in ndo_select_queue Jeff Kirsher
2009-12-03 21:33 ` [net-next-2.6 PATCH 3/5] ixgbe: change default ring size Jeff Kirsher
2009-12-03 21:33 ` [net-next-2.6 PATCH 4/5] ixgbe: performance tweaks Jeff Kirsher
2009-12-03 21:33 ` Jeff Kirsher [this message]
2009-12-03 23:43 ` [net-next-2.6 PATCH 1/5] ixgbe: use known user priority for FCoE when DCB is enabled David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091203213353.9291.64013.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=davem@davemloft.net \
--cc=gospo@redhat.com \
--cc=jesse.brandeburg@intel.com \
--cc=netdev@vger.kernel.org \
--cc=peter.p.waskiewicz.jr@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).