From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
To: netdev@vger.kernel.org
Cc: gospo@redhat.com, Greg Rose <gregory.v.rose@intel.com>,
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Subject: [RFC PATCH 12/12] ixgbevf: Kconfig, Makefile and Documentation
Date: Tue, 08 Dec 2009 14:16:53 -0800 [thread overview]
Message-ID: <20091208221652.28373.22254.stgit@localhost.localdomain> (raw)
In-Reply-To: <20091208221258.28373.16663.stgit@localhost.localdomain>
From: Greg Rose <gregory.v.rose@intel.com>
Modifications for the Kconfig and network device Makefile to add the ixgbevf
driver module to the kernel and documentation.
Signed-off-by: Greg Rose <gregory.v.rose@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
Documentation/networking/ixgbevf.txt | 94 ++++++++++++++++++++++++++++++++++
drivers/net/Kconfig | 21 ++++++++
drivers/net/Makefile | 1
3 files changed, 116 insertions(+), 0 deletions(-)
create mode 100755 Documentation/networking/ixgbevf.txt
diff --git a/Documentation/networking/ixgbevf.txt b/Documentation/networking/ixgbevf.txt
new file mode 100755
index 0000000..4981426
--- /dev/null
+++ b/Documentation/networking/ixgbevf.txt
@@ -0,0 +1,94 @@
+Linux* Base Driver for Intel(R) Network Connection
+==================================================
+
+November 24, 2009
+
+Contents
+========
+
+- In This Release
+- Identifying Your Adapter
+- Known Issues/Troubleshooting
+- Support
+
+In This Release
+===============
+
+This file describes the ixgbevf Linux* Base Driver for Intel Network
+Connection.
+
+The ixgbevf driver supports 82599-based virtual function devices that can only
+be activated on kernels with CONFIG_PCI_IOV enabled.
+
+The ixgbevf driver supports virtual functions generated by the ixgbe driver
+with a max_vfs value of 1 or greater.
+
+The guest OS loading the ixgbevf driver must support MSI-X interrupts.
+
+VLANs: There is a limit of a total of 32 shared VLANs to 1 or more VFs.
+
+Identifying Your Adapter
+========================
+
+For more information on how to identify your adapter, go to the Adapter &
+Driver ID Guide at:
+
+ http://support.intel.com/support/go/network/adapter/idguide.htm
+
+Known Issues/Troubleshooting
+============================
+
+ Intel(R) Active Management Technology 2.0, 2.1, 2.5 not supported in
+ conjunction with Linux driver
+ ---------------------------------------------------------------------
+
+ Unloading Physical Function (PF) Driver Causes System Reboots When VM is
+ Running and VF is Loaded on the VM
+ ------------------------------------------------------------------------
+ Do not unload the PF driver (ixgbe) while VFs are assigned to guests.
+
+Support
+=======
+
+For general information, go to the Intel support website at:
+
+ http://support.intel.com
+
+or the Intel Wired Networking project hosted by Sourceforge at:
+
+ http://sourceforge.net/projects/e1000
+
+If an issue is identified with the released source code on the supported
+kernel with a supported adapter, email the specific information related
+to the issue to ixgbevf-devel@lists.sf.net
+
+License
+=======
+
+Intel Gigabit Linux driver.
+Copyright(c) 1999 - 2008 Intel Corporation.
+
+This program is free software; you can redistribute it and/or modify it
+under the terms and conditions of the GNU General Public License,
+version 2, as published by the Free Software Foundation.
+
+This program is distributed in the hope it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+more details.
+
+You should have received a copy of the GNU General Public License along with
+this program; if not, write to the Free Software Foundation, Inc.,
+51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+
+The full GNU General Public License is included in this distribution in
+the file called "COPYING".
+
+Trademarks
+==========
+
+Intel, Itanium, and Pentium are trademarks or registered trademarks of
+Intel Corporation or its subsidiaries in the United States and other
+countries.
+
+* Other names and brands may be claimed as the property of others.
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 0bbd5ae..a484415 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -2614,6 +2614,27 @@ config IXGBE_DCB
If unsure, say N.
+config IXGBEVF
+ tristate "Intel(R) 82599 Virtual Function Ethernet support"
+ depends on PCI
+ ---help---
+ This driver supports Intel(R) 82599 virtual functions. For more
+ information on how to identify your adapter, go to the Adapter &
+ Driver ID Guide at:
+
+ <http://support.intel.com/support/network/adapter/pro100/21397.htm>
+
+ For general information and support, go to the Intel support
+ website at:
+
+ <http://support.intel.com>
+
+ More specific information on configuring the driver is in
+ <file:Documentation/networking/ixgbe.txt>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called ixgbevf.
+
config IXGB
tristate "Intel(R) PRO/10GbE support"
depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 246323d..da7658b 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -14,6 +14,7 @@ obj-$(CONFIG_IBM_NEW_EMAC) += ibm_newemac/
obj-$(CONFIG_IGB) += igb/
obj-$(CONFIG_IGBVF) += igbvf/
obj-$(CONFIG_IXGBE) += ixgbe/
+obj-$(CONFIG_IXGBEVF) += ixgbevf/
obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CHELSIO_T1) += chelsio/
next prev parent reply other threads:[~2009-12-08 22:17 UTC|newest]
Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-12-08 22:13 [RFC PATCH 01/12] ixgbe: Mailbox header and code module Jeff Kirsher
2009-12-08 22:13 ` [RFC PATCH 02/12] ixgbe: Add SR-IOV specific features Jeff Kirsher
2009-12-08 22:13 ` [RFC PATCH 03/12] ixgbe: Add SR-IOV register, structure and bit defines Jeff Kirsher
2009-12-10 0:06 ` Simon Horman
2009-12-08 22:14 ` [RFC PATCH 04/12] ixgbe: Add SR-IOV feature enablement code Jeff Kirsher
2009-12-08 22:14 ` [RFC PATCH 05/12] ixgbe: Add SR-IOV features to main module Jeff Kirsher
2009-12-10 0:45 ` Simon Horman
2009-12-10 0:49 ` Rose, Gregory V
2009-12-10 1:04 ` Simon Horman
2009-12-08 22:14 ` [RFC PATCH 06/12] ixgbe: Add SR-IOV specific modules to driver Makefile Jeff Kirsher
2009-12-10 0:17 ` Simon Horman
2009-12-08 22:15 ` [RFC PATCH 07/12] ixgbevf: Macros, data structures, useful defines and registers Jeff Kirsher
2009-12-08 22:15 ` [RFC PATCH 08/12] ixgbevf: 82599 Virtual Function core functions and header Jeff Kirsher
2009-12-08 22:15 ` [RFC PATCH 09/12] ixgbevf: Mailbox communication Jeff Kirsher
2009-12-08 22:16 ` [RFC PATCH 10/12] ixgbevf: Driver main and ethool interface module and main header Jeff Kirsher
2009-12-09 17:57 ` Ben Hutchings
2009-12-09 18:02 ` Rose, Gregory V
2009-12-08 22:16 ` [RFC PATCH 11/12] ixgbevf: Driver Makefile Jeff Kirsher
2009-12-08 22:16 ` Jeff Kirsher [this message]
2009-12-08 22:41 ` [RFC PATCH 12/12] ixgbevf: Kconfig, Makefile and Documentation Randy Dunlap
2009-12-08 22:49 ` Rose, Gregory V
2009-12-10 0:59 ` Simon Horman
2009-12-10 1:04 ` Rose, Gregory V
2009-12-10 0:50 ` [RFC PATCH 01/12] ixgbe: Mailbox header and code module Simon Horman
2009-12-10 0:53 ` Rose, Gregory V
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20091208221652.28373.22254.stgit@localhost.localdomain \
--to=jeffrey.t.kirsher@intel.com \
--cc=gospo@redhat.com \
--cc=gregory.v.rose@intel.com \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox