netdev.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Wolfram Sang <w.sang-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
To: Barry Song <21cnbao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: "H.J. Oertel" <oe-pJ9TYRvN+WE@public.gmane.org>,
	netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org,
	uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org,
	davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org,
	Wolfgang Grandegger <wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
Subject: Re: [PATCH v3] add the driver for Analog Devices Blackfin on-chip CAN controllers
Date: Thu, 10 Dec 2009 11:21:45 +0100	[thread overview]
Message-ID: <20091210102145.GA3097@pengutronix.de> (raw)
In-Reply-To: <3c17e3570912100214k4b3eb038u1108c82bfa346389-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>


[-- Attachment #1.1: Type: text/plain, Size: 2233 bytes --]


> >> +     if (status) {
> >> +             priv->can.can_stats.bus_error++;
> >> +
> >> +             cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
> >> +
> >> +             if (status & BEF)
> >> +                     cf->data[2] |= CAN_ERR_PROT_BIT;
> >> +             else if (status & FER)
> >> +                     cf->data[2] |= CAN_ERR_PROT_FORM;
> >> +             else if (status & SER)
> >> +                     cf->data[2] |= CAN_ERR_PROT_STUFF;
> >> +             else
> >> +                     cf->data[2] |= CAN_ERR_PROT_UNSPEC;
> >> +     }
> >
> > Add {} here as well.
> {} will cause checkpatch warning if it is given to only one line.

Right, no need for braces here, because it is always one statement after
if/else.


> >> +     if ((irq == priv->tx_irq) && readw(&reg->mbtif2)) {
> >> +             /* transmission complete interrupt */
> >> +             writew(0xFFFF, &reg->mbtif2);
> >> +             stats->tx_packets++;
> >> +             stats->tx_bytes += bfin_can_read_dlc(priv, TRANSMIT_CHL);
> >> +             can_get_echo_skb(dev, 0);
> >> +             netif_wake_queue(dev);
> >> +     } else if ((irq == priv->rx_irq) && readw(&reg->mbrif1)) {
> >> +             /* receive interrupt */
> >> +             isrc = readw(&reg->mbrif1);
> >> +             writew(0xFFFF, &reg->mbrif1);
> >> +             bfin_can_rx(dev, isrc);
> >> +     } else if ((irq == priv->err_irq) && readw(&reg->gis)) {
> >> +             /* error interrupt */
> >> +             isrc = readw(&reg->gis);
> >> +             status = readw(&reg->esr);
> >> +             writew(0x7FF, &reg->gis);
> >> +             bfin_can_err(dev, isrc, status);
> >> +     } else
> >> +             return IRQ_NONE;
> >
> > Use {} here as well.
> {} will cause checkpatch warning if it is given to only one line.

Then again, here braces are suggested. If the 'if'-block has braces, the
'else'-block should have braces, too. If checkpatch really complains about it,
this is a bug in checkpatch.

Regards,

   Wolfram

-- 
Pengutronix e.K.                           | Wolfram Sang                |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |

[-- Attachment #1.2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

[-- Attachment #2: Type: text/plain, Size: 188 bytes --]

_______________________________________________
Socketcan-core mailing list
Socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org
https://lists.berlios.de/mailman/listinfo/socketcan-core

  parent reply	other threads:[~2009-12-10 10:21 UTC|newest]

Thread overview: 25+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2009-12-10  7:27 [PATCH v3] add the driver for Analog Devices Blackfin on-chip CAN controllers Barry Song
     [not found] ` <1260430072-21106-1-git-send-email-21cnbao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2009-12-10  9:11   ` Wolfgang Grandegger
2009-12-10 10:04     ` [Uclinux-dist-devel] " Mike Frysinger
2009-12-10 10:05       ` Barry Song
2009-12-10 10:12         ` Mike Frysinger
     [not found]       ` <8bd0f97a0912100204gd2b09f6r2799d9f951d6b9e1-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-12-10 10:20         ` Wolfgang Grandegger
2009-12-10 10:45           ` Mike Frysinger
     [not found]             ` <8bd0f97a0912100245k9930c90ke4b184da68a9f958-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-12-10 10:55               ` Wolfgang Grandegger
2009-12-10 11:04                 ` Mike Frysinger
2009-12-10 11:16                   ` Wolfgang Grandegger
2009-12-10 21:38                     ` David Miller
2009-12-10 10:48           ` Wolfgang Grandegger
2009-12-10 10:58             ` Mike Frysinger
2009-12-10 21:37               ` David Miller
2009-12-11  2:05                 ` Barry Song
2009-12-11  2:17                   ` Mike Frysinger
     [not found]                     ` <8bd0f97a0912101817x79a17d5dje21e2a2b4ad1fc58-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-12-11  4:00                       ` Barry Song
     [not found]                         ` <3c17e3570912102000vd30d452s2d6b6ae7d24f340f-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-12-11  8:51                           ` Wolfgang Grandegger
     [not found]                 ` <20091210.133729.42872813.davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org>
2009-12-17  1:20                   ` Mike Frysinger
2009-12-10 11:06             ` [Uclinux-dist-devel] " Hennerich, Michael
     [not found]               ` <8A42379416420646B9BFAC9682273B6D0EDD9A3C-pcKY8lWzTjquVPpjEGsWsTcYPEmu4y7e@public.gmane.org>
2009-12-10 11:19                 ` Wolfgang Grandegger
     [not found]     ` <4B20BB36.50509-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org>
2009-12-10 10:14       ` Barry Song
     [not found]         ` <3c17e3570912100214k4b3eb038u1108c82bfa346389-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2009-12-10 10:21           ` Wolfram Sang [this message]
     [not found]             ` <20091210102145.GA3097-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
2009-12-10 10:25               ` Barry Song
2009-12-10 10:35         ` Wolfgang Grandegger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20091210102145.GA3097@pengutronix.de \
    --to=w.sang-bicnvbalz9megne8c9+irq@public.gmane.org \
    --cc=21cnbao-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org \
    --cc=netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=oe-pJ9TYRvN+WE@public.gmane.org \
    --cc=socketcan-core-0fE9KPoRgkgATYTw5x5z8w@public.gmane.org \
    --cc=uclinux-dist-devel-ZG0+EudsQA8dtHy/vicBwGD2FQJk+8+b@public.gmane.org \
    --cc=wg-5Yr1BZd7O62+XT7JhA+gdA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).