* [net-2.6 PATCH 1/2] ixgbe: set the correct DCB bit for pg tx settings
@ 2010-01-28 2:37 Jeff Kirsher
2010-01-28 2:38 ` [net-2.6 PATCH 2/2] ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early Jeff Kirsher
2010-01-28 13:56 ` [net-2.6 PATCH 1/2] ixgbe: set the correct DCB bit for pg tx settings David Miller
0 siblings, 2 replies; 4+ messages in thread
From: Jeff Kirsher @ 2010-01-28 2:37 UTC (permalink / raw)
To: davem; +Cc: netdev, gospo, John Fastabend, PJ Waskiewicz, Jeff Kirsher
From: John Fastabend <john.r.fastabend@intel.com>
Set the correct bit BIT_PG_TX when tx PG settings are set.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_dcb_nl.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 56f37f6..383e799 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -223,7 +223,7 @@ static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id,
if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] !=
adapter->dcb_cfg.bw_percentage[0][bwg_id]) {
- adapter->dcb_set_bitmap |= BIT_PG_RX;
+ adapter->dcb_set_bitmap |= BIT_PG_TX;
adapter->dcb_set_bitmap |= BIT_RESETLINK;
}
}
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [net-2.6 PATCH 2/2] ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early
2010-01-28 2:37 [net-2.6 PATCH 1/2] ixgbe: set the correct DCB bit for pg tx settings Jeff Kirsher
@ 2010-01-28 2:38 ` Jeff Kirsher
2010-01-28 13:57 ` David Miller
2010-01-28 13:56 ` [net-2.6 PATCH 1/2] ixgbe: set the correct DCB bit for pg tx settings David Miller
1 sibling, 1 reply; 4+ messages in thread
From: Jeff Kirsher @ 2010-01-28 2:38 UTC (permalink / raw)
To: davem; +Cc: netdev, gospo, John Fastabend, PJ Waskiewicz, Jeff Kirsher
From: John Fastabend <john.r.fastabend@intel.com>
Call ixgbe_copy_dcb_cfg() earlier in the ixgbe_dcbnl_set_all() so that
we can learn if this is going to fail as early as possible. Previously,
ixgbe_down or ixgbe_close were being called before this check and the
IXGBE_RESETTING bit was being set and cleared. Worse if this failed
the corresponding ixgbe_up/ndo_open would not called.
Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/ixgbe/ixgbe_dcb_nl.c | 14 ++++++--------
1 files changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index 383e799..dd4883f 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -341,6 +341,12 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
if (!adapter->dcb_set_bitmap)
return DCB_NO_HW_CHG;
+ ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
+ adapter->ring_feature[RING_F_DCB].indices);
+
+ if (ret)
+ return DCB_NO_HW_CHG;
+
/*
* Only take down the adapter if the configuration change
* requires a reset.
@@ -359,14 +365,6 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
}
}
- ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg,
- adapter->ring_feature[RING_F_DCB].indices);
- if (ret) {
- if (adapter->dcb_set_bitmap & BIT_RESETLINK)
- clear_bit(__IXGBE_RESETTING, &adapter->state);
- return DCB_NO_HW_CHG;
- }
-
if (adapter->dcb_cfg.pfc_mode_enable) {
if ((adapter->hw.mac.type != ixgbe_mac_82598EB) &&
(adapter->hw.fc.current_mode != ixgbe_fc_pfc))
^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [net-2.6 PATCH 2/2] ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early
2010-01-28 2:38 ` [net-2.6 PATCH 2/2] ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early Jeff Kirsher
@ 2010-01-28 13:57 ` David Miller
0 siblings, 0 replies; 4+ messages in thread
From: David Miller @ 2010-01-28 13:57 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: netdev, gospo, john.r.fastabend, peter.p.waskiewicz.jr
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed, 27 Jan 2010 18:38:06 -0800
> From: John Fastabend <john.r.fastabend@intel.com>
>
> Call ixgbe_copy_dcb_cfg() earlier in the ixgbe_dcbnl_set_all() so that
> we can learn if this is going to fail as early as possible. Previously,
> ixgbe_down or ixgbe_close were being called before this check and the
> IXGBE_RESETTING bit was being set and cleared. Worse if this failed
> the corresponding ixgbe_up/ndo_open would not called.
>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Applied.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [net-2.6 PATCH 1/2] ixgbe: set the correct DCB bit for pg tx settings
2010-01-28 2:37 [net-2.6 PATCH 1/2] ixgbe: set the correct DCB bit for pg tx settings Jeff Kirsher
2010-01-28 2:38 ` [net-2.6 PATCH 2/2] ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early Jeff Kirsher
@ 2010-01-28 13:56 ` David Miller
1 sibling, 0 replies; 4+ messages in thread
From: David Miller @ 2010-01-28 13:56 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: netdev, gospo, john.r.fastabend, peter.p.waskiewicz.jr
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Wed, 27 Jan 2010 18:37:44 -0800
> From: John Fastabend <john.r.fastabend@intel.com>
>
> Set the correct bit BIT_PG_TX when tx PG settings are set.
>
> Signed-off-by: John Fastabend <john.r.fastabend@intel.com>
> Acked-by: PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Applied.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-01-28 13:56 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-01-28 2:37 [net-2.6 PATCH 1/2] ixgbe: set the correct DCB bit for pg tx settings Jeff Kirsher
2010-01-28 2:38 ` [net-2.6 PATCH 2/2] ixgbe: if ixgbe_copy_dcb_cfg is going to fail learn about it early Jeff Kirsher
2010-01-28 13:57 ` David Miller
2010-01-28 13:56 ` [net-2.6 PATCH 1/2] ixgbe: set the correct DCB bit for pg tx settings David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).